Disposal prices have been reduced. Member discounts are not applicable. 2023/5/3 sales price 150,000 yen enclosure for Tannoy 30/38cm units by Utopia. You can enjoy high-sounding front-load sound like an autograph at a realistic size. The lattice design on the unit is also attractive. There is a gap in the lattice and corner (Oikawa Tetsuji)
Accessories: screws
Main specifications: W650 x H815 x D650 m 29.6 kg (actual measurement)
A custom-made enclosure made by Tatematsu Onko, a long-established box-making company. JBL's 4340/4341 is slightly smaller, and SANSUI's EC-146 is one size smaller. The good size, which is about halfway between 4343 and 4333, is attractive. It is made in a 3-way configuration, and can be fitted with 2405 and 075 tweeters, H91 straight horns, and 38cn woofers. The whole thing is dull and there is a feeling of use (Murakoshi Yoichi)
Accessories: saran net, ducts
Main specifications: size W586 x D455 (510 when net attached) x H900 mm weight approx. 45 kg/1 bottle
The price has been reduced. 2023/3/11 sales price 20,000 yen Goodman's classic Sherwood type designated box. ARU is mounted on the back. The previous owner used it in 2 ways and has an attenuator made by Pioneer. The screw-type speaker terminals are scratched and there is a feeling of use throughout. (Murakoshi Yoichi)
Accessories: none
Main specifications: screw pitch (diagonal) 300 mm, opening diameter 275 mm, W603 x H700 x D497 mm, approx. 24 kg
An enclosure for 30cm and slightly larger than 618C. It's an airtight box that sounds good. How about those who are in the mono style? The speaker terminal is not attached. Small paint drops are scattered here and there (Murakoshi Yoichi)
Accessories: none
Main specifications: sealed opening φ275 mm, screw pitch 294 mm, external dimensions W572 x H643 x D353 (bottom), 272 (top) mm 15 kg
Unspecified ONKEN type enclosure. The slit type ducts on both sides are impressive, and it is a duct with a very calculated structure. RCA's LC-1A was mounted. The exterior has a feeling of use such as dullness and scratches (Takasaki Atsushi)
Accessories: none
Main specifications: W803 x H1037 x D558 mm 57.6 kg
The price has been reduced. 2021/10/22 sales price 69,800 yen The company's classic front load enclosure. There is no side logo, probably because the cereal is young. Sound skipping is good, and it makes a crisp sound even with heavy units. There is a lot of damage to the exterior, such as scratches, paint peeling, etc. Serial 14804 14805 ※Since it is a large and heavy item, shipping costs will be estimated separately (Kondo Hirotsugu)
Accessories: none
Main specifications: Front load horn system/floor type enclosure compatible speakers 2205, 2220, etc. Minimum playback frequency 60 Hz W752 x H914 x D610 mm 46 kg
1 bottle only This is JBL's popular speaker VISCOUNT domestic box. A bass reflex type with a hole for attaching a 38cm unit, a screwdriver, a hole compatible with a tweeter, and a mecha plate. The saran net has a structure that can be removed from the bottom like the original box (Murakoshi Yoichi)
Accessories: none
Main specifications: W495 x H763 x D405 mm 18.5 kg
1 bottle only Domestic box from JBL's popular speaker BARON. The baffle has a JBL 38cm hole and a hole where the company's tweeter fits perfectly. A Lux attenuator is attached to the back (Murakoshi Yoichi)
Accessories: none
Main specifications: W605 x H620 x D403 mm 16.8 kg
This is a self-made enclosure to which a JBL 30cm woofer was attached. The front baffle has an attenuator, but there is no wiring. Comes with casters for easy setting. The frame of the saran net is broken. There are many external abrasions and a feeling of use (Murakoshi Yoichi)
Accessories: saran net
Main specifications: woofer opening φ280 mm diagonal screw pitch 345 mm external dimensions W605 x H750 (up to the top plate 650) x D510 (including saran net and angle) mm weight approx. 42 kg
Small enclosure from unknown manufacturer. The slit on the side of the front baffle is open with a net attached (not sealed). A speaker terminal is attached to the bottom. The previous owner had a Coral 10cm unit installed (Murakoshi Yoichi)
Accessories: saran net
Main specifications: W316 x H399 x D220 mm 3.3 kg (actual measurement) /main screw pitch 123 mm
It seems that the baffle of Sansui's masterpiece SP-LE8T enclosure was remodeled and a separate unit was attached. The lattice's fastening screws and speaker terminals are missing. There is a FOSTEX seal on the front part, and there are abrasions and a feeling of use throughout (Murakoshi Yoichi)
Accessories: none
Main specifications: opening diameter 213mm W358 x H597 x D300 mm
The price has been reduced. 2022/11/12 sales price 30,000 yen An onken (Onken) style 38cm enclosure with impressive bass reflections lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. ALTEC's 416-8A was originally mounted, and it's an enclosure that I want to assemble with a horn system to make it sound well. There is a feeling of use such as scratches and dirt overall (Itsuro Mizushima)
Accessories: none
Main specifications: plate thickness 24 mm unit opening diameter 346 mm screw hole diagonal 373 mm W795 x H950 x D550 mm 57.8 kg (actual measurement) *The 18 screws on the back panel can be removed, but there is no gap at all and they are hard, so there is a possibility of adhesion.
The price has been reduced! 2023/2/8 sales price 65,000 yen An enclosure where Yamamoto Sound Craft's JBL 38cm woofer can be mounted. A 30mm thick board is used, and the construction is sturdy. The D130 was originally mounted. The exterior has peeling veneers, scratches, repair marks, etc. (Kimiya Miura)
Accessories: no accessories
Main specifications: bass reflex type W600 x H770 x D500 mm 47.1 kg
Onken style self-made 38cm double woofer enclosure. The TW hole is blocked and the back side is unpainted. There are scratches and dents ※postage will be estimated separately (Oikawa Tetsuji)
Main specifications: W800 x H965D590mm 41.4 kg (actual measurement)
Disposal prices have been reduced. Member prices are not applicable. 2023/1/19 sales price 298,000 yen The double woofer enclosure for JBL 38cm made by Tatematsu Sound is in stock. Four JBL 2235Hs were mounted. The sturdy construction suppresses unnecessary box sounds and plays tight low frequencies. It's good to make a new unit powerful, and it's also good to play a vintage unit in a relaxed manner; as expected, it's an enclosure called Tatematsu Onko (Fujisawa Koshi)
Accessories: unit mounting screws
Main specifications: plate thickness front 30 mm back 25 mm W1080 x H800 x D530 mm weight 78 kg (actual measurement)
Disposal prices have been reduced. Member discounts do not apply. 2022/12/24 sales price 250,000 yen Overwhelming presence! Altec's original double woofer enclosure. A load of up to 150 Hz is applied to the front load, and the bass reflex port allows the low frequencies to be extended to 50 Hz. Shipping costs will be estimated separately. (Murakoshi Yoichi)
Accessories: none
Main specifications: Bass reflex compatible unit with front road horn 38 cm x 2 W953 x H857 x D679 mm 81.6 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/24 sales price 250,000 yen Overwhelming presence! Altec's original double woofer enclosure. A load of up to 150 Hz is applied to the front load, and the bass reflex port allows the low frequencies to be extended to 50 Hz. The attachment position of the mecha plate is slightly different on the left and right. Shipping costs will be estimated separately. (Murakoshi Yoichi)
Accessories: none
Main specifications: Bass reflex compatible unit with front road horn 38 cm x 2 W953 x H857 x D679 mm 81.6 kg
※Since it is painted gray, it is inexpensive. It is an enclosure jointly developed by Sansui and JBL so that JBL's 20cm unit can be mounted. It's perfect for LE8T, so why don't you try playing it easily? There is a lot of dirt and abrasions scattered throughout. *A cutout has been applied to the unit opening, and some Onime nuts have fallen off (Murakoshi Yoichi)
Accessories: spare bass reflex duct
Main specifications: 48L W390 x H590 x D290 mm weight 16 kg
The price has been reduced. 2022/12/15 Sales price 30,000 yen*Currently on sale. 4333 type enclosure from unknown manufacturer. The hole for the network is blocked with a board. As for the exterior, there are many scratches on the top and sides, there are dents on the upper back corner, and there are many paint repairs with slightly different colors (Kanai Hidetsugu)
Accessories: none
Main specifications: dimensions W619 x H778 x D467 mm unit mounting screw diagonal dimensions, woofer 420 mm, horn 140 mm, tweeter 107 mm (actual measurement) weight approx. 41.0 kg
The price has been reduced. 2023/1/4 sales price 50,000 yen It is a domestically produced enclosure made in the style of JBL 4331. The strength of the enclosure is solid and is no less than that of JBL. The unit size that can be used is a 38 cm woofer, a 1 inch driver/12 cm horn opening, and a 10 cm tweeter. Can be used 2 way or 3 way. The exterior is dull and scratched (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: size W605 x H785 x D515 mm 35 kg
The price has been reduced! 2022/12/18 Self-made enclosure with a sale price of 2,000 yen. It is an exterior with a veneer like walnut attached to a particle board. It seems that a 4-inch unit can be used. The exterior has dullness, dirt, small scratches, etc. (Takahashi Nobuyuki)
Accessories: saran net
Main specifications: W204 x H300 x D255 mm 3.4 kg per tree (actual measurement)
Self-made backload horn type enclosure for 10cm units. There are several large scratches (Kanai Hidetsugu)
Accessories: screws
Main specifications: W196 x H450 x D300 mm Unit mounting opening φ100 mm Diagonal screw pitch 115 mm Weight approx. 5 kg (actual measurement)
The price has been reduced. 2022/6/12 sales price 100,000 yen Fostex FW800 enclosure. Unlike the company's E800W, there is no hole for the bass reflex port, but the handle is very similar, and the same terminal is used. The weight could not be measured at the store, but it seems to be around 130 kg. I see a lot of abrasions (Murakoshi Yoichi)
Accessories: saran net, mounting screws
Main specifications: W1223 x H942 x D610 mm, opening diameter 750 mm, screw pitch 295 mm (actual measurement)
※1 enclosure only. Includes high pass filter HP 170 for high frequencies. Diatone 2S-305 enclosure. The structure with the left and right sides rounded is designed so that there is no influence from diffraction effects (Murakoshi Yoichi)
Accessories: none
Main specifications: W650 x H880 x D445 mm
The price has been reduced. 2022/11/18 sales price 79,800 yen. Comes with MA15 woofer closure! JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass that far exceeds its size. The exterior is scattered with chips, scratches, and dullness. (Murakoshi Yoichi)
Accessories: woofer fastener MA15
Main specifications: hole diameter 365 mm, screw pitch 420 mm, backload horn system compatible speaker 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H1212 x D603 mm approx. 54 kg
The price has been drastically reduced. 2022/5/31 sales price 120,000 yen The company's classic front load enclosure original model. Sound skipping is good, and it makes a crisp sound even with heavy units. There is a feeling of use on the exterior as a whole, such as small scratches, paint peeling, etc. ※Since it is a large and heavy item, shipping costs will be estimated separately (Murakoshi Yoichi)
Accessories: none
Main specifications: Front load horn system/floor type enclosure compatible speakers 2205, 2220, etc. Minimum playback frequency 60 Hz W752 x H914 x D610 mm 46 kg
It is an enclosure jointly developed by Sunsui and JBL so that JBL's 20cm unit can be mounted. It's perfect for LE8T and why not play easily? The exterior has a feeling of use such as uneven paint, small scratches, and dullness on the top plate. Serial 59070049 5907505 (Asane Tomonori)
Accessories: none
Main specifications: 48L W390 x H590 x D290 mm Weight 16 kg
Prices have been reduced. 2022/10/19 Sales price 20,000 yen Backload horn enclosure with unknown details. The ease of installation is attractive because it comes with casters. The previous owner seems to have built in JBL, and there is a network hole and a cannon terminal on the back (Murakoshi Yoichi)
Accessories: Saran net
Main specifications: W607 x H1028 x D505 mm aperture φ355 mm, φ133 mm screw pitch 370 mm, 163 mm weight 42.5 kg (actual measurement)
It's a 4560-style enclosure made from strong, sturdy plywood. Since the inside of the box is narrow, it is suitable for ferrite units, but the front load and interior are also carefully crafted, so you can expect loud bass. Details are unknown, but a saran net with an ALTEC logo plate is also included. Overall, there is a lot of feeling of use such as dullness, abrasions, scratches, missing bottom corners, etc. (Atsushi Takasaki)
Accessories: Saran net
Main specifications: Screw pitch approx. 370 mm, opening part, 350 mm, internal depth 180 mm, size approx. W760 x H910 (1048 including casters) x D603 (623 including back plate) mm (all measured)
Self-made enclosure. The enclosure uses 20mm thick solid board for the baffle, and the exterior is a well-made enclosure with veneer. It seems that a 4-inch unit can be used for the woofer section, and one with an aperture of up to 78 mm can be used for the tweeter part. The exterior is dull, dirty, small scratches, etc. (Takahashi Nobuyuki)
Accessories: none
Main specifications: W198 × H350 × D255 mm 4.7 kg per bottle (actual measurement)
Self-made enclosure. It is an exterior with oak-like veneer attached to the particle board. It seems that a 3.5-inch unit can be used. The exterior is dull, dirty, small scratches, logo sticker marks, etc. (Takahashi Nobuyuki)
Accessories: Saran net
Main specifications: W152 x H273 x D255 mm 2.9 kg per bottle (actual measurement)
This is a 38cm front road horn by Hino Audio designed to imitate Altec's 816. Yonematsu plywood is used, so the sound sounds good and you can listen comfortably for consumer use. The previous owner mounted and used an ALTEC unit. There are scratches and peeling of the veneer (Murakoshi Yoichi)
Accessories: none
Main specifications: W641 × H800 × D647 mm 41.4 kg (actual measurement)
The price has been reduced! 2018/9/21 Sales price 99,800 yen*Only one unit is sold. ALTEC double woofer enclosure. The overall exterior has scratches due to use over time. Shipping costs will be estimated separately. (Fukuzawa Osamu)
Accessories: none
Main specifications: approx. W950 x H860 x D680 mm Weight: approx. 80 kg
The disposal price has been reduced! (Member discounts are not applicable) 2022 8/1 sales price 99,800 yen You can experience the thick, energetic low frequencies unique to the JBL standard front road enclosure pro model Since the front road part and upper baffle are not Yonematsu plywood, I think it is a late model. The exterior has bruises and repair marks, etc., but there are few stains, fading, etc., and it is a beautiful item for this kind of enclosure. (Asane Tomonori)
Accessories: none
Main specifications: baffle opening diameter 351 mm screw pitch (diagonal) 370 mm W764 × H914 × D611 mm (actual measurement) 39.2 kg (actual measurement)
The price has been reduced. 2022 7/30 selling price 79,800 yen with MA15 woofer fastening. A floor-type enclosure that uses a rear loading horn system. The interior has a fold-over horn structure with a total length of 2 m, enabling powerful bass reproduction far exceeding its size. The exterior has many scratches, corner chips, abrasions, sticking marks, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W603 × H1212 × D603 mm approx. 54 kg
The price has been reduced. 2022 9/18 sales price 140,000 yen A vertical 38cm woofer enclosure equipped with Great Plains Audio (ALTEC) 515-8HHP. The sides are 40mm thick, and they are quite sturdy and heavy. Please note that the screw pitch is a slightly special 380 mm size. There are scratches and small scratches on the exterior. Both saran net dowels are broken in one place (Takasaki Atsushi)
Accessories: saran net
Main specifications: Baffle opening diameter 355 mm from screw to screw 380 mm (diagonal) W680 × H900 × D556 mm (actual measurement)
D-101 (Swan) Assembly Plate Pair Fostex Genuine Unassembled Item! * We have not confirmed that the parts are complete, so we will sell them as they are. This is a backload horn for using the 10cm full-range speaker FE106σ. Both the sense of sound field and the sense of volume are excellent, and it is a dish filled with the ideals of Mr. Tetsuo Nagaoka (Daiki Goto)
Accessories: instruction manual, original box, bag
12cm bass reflex enclosure You can easily enjoy making speakers by combining it with a 12cm full-range unit of your choice. Please spend a blissful time listening to the music that plays while watching the audio you made yourself. The exterior has scratches, dirt, and dullness (Hiura Katsuji)
Accessories: saran net
Main specifications: Opening diameter 105 mm Screw pitch 122 mm W205 × H302 × D220 mm Weight 305 kg
The bass reflex enclosure in which the JBL LE8T and 2405H were mounted. A saran net is also attached, and it is relatively carefully built. There is a feeling of use such as rubbing and small scratches (Itsuro Mizushima)
Accessories: saran net
Main specifications: W338 × H590 × D345 mm 11 kg
It is a self-made woofer box made by processing and remodeling a rack. The JBL 1500AL was mounted. Comes with casters. One place on each side is broken around the demon eye (Fujisawa Yukishi)
Accessories: none
Main specifications: plate thickness 35mm woofer 370mm (screw pitch) back opening 153mm (screw pitch) W510 × H780 × D443 mm 34.9 kg (actual measurement)
The price has been reduced! 2022/8/4 selling price 20,000 yen Self-made Yonematsu plywood enclosure This enclosure is the perfect enclosure for mounting the D130, etc., a 38cm cone type unit representative of JBL. Using 24mm thick plywood, it is carefully made so that the screws do not come out of the front except the back plate. The appearance has a feeling of use such as dullness. (Nobuyuki Takahashi)
Accessories: none
Main specifications: Outer dimensions W493 × D446 × H651 mm Baffle opening 384 mm Screw pitch (diagonal) 423 mm Back opening W105 × H140 mm Weight 22 kg (actual measurement)
Enclosures for drivers and tweeters. In combination with the EC-20, it is possible to joint horn drivers, tweeters, etc. The terminals have been changed to be compatible with bananas. The exterior has corner chips, dirt, and some dowels are broken. *Saran net is not included. (Tamura Eiji)
Accessories: none
Main specifications: MID screw pitch 140mm Tweeter screw pitch 108mm W500 × H260 × D380mm Weight 11kg
Enclosure for Fostex's full-range speaker G203. It had a 20cm unit attached to it. No saran net. There is a lot of dullness and feeling of use (Yoichi Murakoshi)
Accessories: none
Main specifications: Mounting hole diameter 177 mm W298 × H477 × D250 mm 5 kg