Onken style self-made 38cm double woofer enclosure. The TW hole is blocked and the back side is unpainted. There are scratches and dents ※postage will be estimated separately (Oikawa Tetsuji)
Main specifications: W800 x H965D590mm 41.4 kg (actual measurement)
Fostex Bird Backload, Swan Imitating Enclosure A slightly unusual round head is stylish. Good appearance, beautiful finish (Yoichi Murakoshi)
Accessories: none
Main specifications: Unit screw diagonal dimension 92mm W299 × H983 x D300mm 10.9kg
Self-made Altec A8 style enclosure. There are scratches and paint peeling. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: W610 x H1065 x D390 mm weight 23.5 kg (actual measurement)
This is a self-made bookshelf enclosure for 10cm units. There are a few scratches, but the construction is quite solid. Varnish is applied all over (Fujisawa Yukishi)
Accessories: none
Main specifications: W225 x H295 x D215 mm, hole diameter 100 mm
Self-made backloaded horn type enclosure. It looks like a 10cm unit can be mounted (Fujisawa Yukishi)
Accessories: none
Main specifications: W225 x H500 x D300 mm, hole diameter 110 mm
Self-made enclosure. The enclosure uses 20mm thick solid board for the baffle, and the exterior is a well-made enclosure with veneer. It seems that a 4-inch unit can be used for the woofer section, and one with an aperture of up to 78 mm can be used for the tweeter part. The exterior is dull, dirty, small scratches, etc. (Takahashi Nobuyuki)
Accessories: none
Main specifications: W198 × H350 × D255 mm 4.7 kg per bottle (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/11 sales price 3,000 yen ※It is cheap because it is in poor condition! The self-made enclosure 2-way type 175DLH and D130 were mounted, but the hole position on the screw receiving side did not match and they were fixed by sealing. Processing is required for actual installation. The exterior has a feeling of use over time, such as dullness, scratches, peeling veneer, etc. (ASAINE Tomonori)
Accessories: saran net
Main specifications: size 450 x 845 x 450 mm weight 17.7 kg (actual measurement)
20cm enclosure with vibrant colors. The previous owner installed the LE8T (Oikawa Tetsuji)
Accessories: none
Main specifications: W320 x H615 x D310 mm, opening 180 mm, weight 11.3 kg/1 bottle
Disposal prices have been reduced! (Member discount does not apply) 2023/8/6 sales price 2,000 yen bookshelf type self-made enclosure. It comes with a 2-way bass reflex port. The exterior has uneven paint, cracks, holes to which screws are attached, etc. (Asaina Satoshi method)
Accessories: none
Main specifications: aperture tweeter part 70 mm woofer part 122 mm size W218 x H378 x D220 mm weight 3.2 kg (measured value)
A small unknown enclosure. It is a slit bass reflex system, and it is a well-made enclosure with sound absorbing material attached. Unit hole diameter 132 mm. There are slight stains and small scratches on the exterior (Tomoho Asaine)
Accessories: none
Main specifications: size 300 x 460 x 270 mm, weight 5.1 kg (actual measurement)
Self-made enclosure. It is an exterior with oak-like veneer attached to the particle board. It seems that a 3.5-inch unit can be used. The exterior is dull, dirty, small scratches, logo sticker marks, etc. (Takahashi Nobuyuki)
Accessories: Saran net
Main specifications: W152 x H273 x D255 mm 2.9 kg per bottle (actual measurement)
Self-made enclosures. JBL LE-8TH was installed. There are scratches and dirt on the whole, and only the top plate part is painted black. The hole at the top that was installed has rattling (Ryo Mizusaki)
Accessories: None
Main specifications: Hole diameter (top 180 mm, bottom 180 mm) W353 × H630 × D305 mm approx. 10.2 kg/1 piece
The price has been reduced! 2020/12/27 Selling price 10,000 yen self-made enclosure. JBL 2110 was installed. There are scratches and dirt on the whole, and the screws are deteriorated and damaged. (Morning Tomoho)
Accessories: Saran net* included is sweet.
Main specifications: Size W485 × H850 × D437mm Weight 31.6kg (actual measurement)
The price has been reduced! 2021/1/4 selling price 8,000 yen A self-made bass reflex enclosure for a full range. It has a unique design with a bass reflex port behind the top plate. Why don't you play around with the 10cm unit? The appearance is dull. (Satoshi Yoneshima)
Accessories: No accessories
Main specifications: hole diameter 90mm W211×H340×D303mm 4.9kg
The price has been reduced! 2022/12/18 Self-made enclosure with a sale price of 2,000 yen. It is an exterior with a veneer like walnut attached to a particle board. It seems that a 4-inch unit can be used. The exterior has dullness, dirt, small scratches, etc. (Takahashi Nobuyuki)
Accessories: saran net
Main specifications: W204 x H300 x D255 mm 3.4 kg per tree (actual measurement)
The price has been reduced! 2022/8/4 selling price 20,000 yen Self-made Yonematsu plywood enclosure This enclosure is the perfect enclosure for mounting the D130, etc., a 38cm cone type unit representative of JBL. Using 24mm thick plywood, it is carefully made so that the screws do not come out of the front except the back plate. The appearance has a feeling of use such as dullness. (Nobuyuki Takahashi)
Accessories: none
Main specifications: Outer dimensions W493 × D446 × H651 mm Baffle opening 384 mm Screw pitch (diagonal) 423 mm Back opening W105 × H140 mm Weight 22 kg (actual measurement)