A floor-type enclosure similar to Goodmans designated boxes. There is an ARU-like vent at the bottom of the baffle to control the low range. There are abrasions on the whole, feeling of use in the saran net (Yoichi Murakoshi)
Main specifications: W500 × H1228 × D405mm Opening diameter 28cm 25.2kg
I cut the price. 2021/9/12 Selling price 25,000 yen SANSUI driver, tweeter box EC-12. There were actually H91 and LE85 and 075 mounted. There is also a hole for the network LX5 and N7000, please try if you are thinking of 3 way by all means Appearance paint peeling and scratches will be scattered (Hirotsugu Kondo)
Accessories: saran net
Main specifications: W590 × H280 × D470mm 12kg
I cut the price. 2021/9/12 Selling price 35,000 yen Unspecified enclosure imitating 828 that can be mounted 38cm. Originally JBL2220A was in it. The appearance leaves considerable rubbing, peeling, and feeling of use (Hirotsugu Kondo)
Accessories: None
Main specifications: aperture diameter 315mm screw diagonal 375mm W630 × H800 × D550mm 36.2kg
Lower price (2019/9/23 selling price 59,800 yen) * Low price due to poor degree. Comes with MA15 (woofer clasp) Floor type enclosure that adopts rear loading horn system. The interior features a 2-meter folded horn construction, allowing for powerful bass reproduction far above the size. There are many chips and large scratches in appearance, and there is considerable feeling of use such as network fixation demon nut off and missing. Serial 12230/12231 (Tadashi Watanabe)
Accessories: MA15 (woofer closure)
Main specifications: Backroad horn compatible speakers 2205, 2225, E140 Minimum playback frequency of 50 Hz W603 × H1212 x D603mm approx. 54 kg
※ semi-finished product Fostex enclosure kit released by Akira Sumiyama in 2010 in Audio Basic magazine. You can build your own speaker system with your preferred unit. ※We will estimate shipping fee separately (Oikawa Tetsuji)
Accessories: screws
Main specifications: W340 × H1,000 × D395mm (measured)
Unopened pair Unassembled Fostex enclosure kit released by Akira Sumiyama in 2010 in Audio Basic magazine. Install and use the company's full-range unit and speaker terminals (Yoichi Murakoshi)
Accessories: original box
Main specification: packing weight 15.2kg/1 box
Fostex Bird Backload, Swan Imitating Enclosure A slightly unusual round head is stylish. Good appearance, beautiful finish (Yoichi Murakoshi)
Accessories: none
Main specifications: Unit screw diagonal dimension 92mm W299 × H983 x D300mm 10.9kg
Lower price (2020/8/27 selling price 20,000 yen) *There is little gap and it is difficult to remove the baffle plate. The front baffle in which the AXIOM system is housed is an oblique enclosure. The former owner was mounted ALTEC 604E. There is a feeling of use overall. It's a pair with a lot of scratches.
Accessories: none
Main specifications: Plate thickness 25mm Unit opening diameter 338 mm W642 × H900 × D490mm approx. 50 kg
The price was reduced. 2021/7/24 selling price 59,800 yen SANSUI heavyweight enclosure. This is a symmetrical bass enclosure that can mount 46 cm caliber woofers and 30 cm caliber midwoofers. A noticeable gully scratch remains centered on the side. The Saran Net emblem is in a horizontal position. (Kondo Hirotsugu)
Accessories: Saran Net
Main Specifications: Fits Woofer 2240H, 2245H Compatible Mid Woofer 2202H Dimensions W700 x H990 x D550mm Weight 62 kg/1
The price was reduced. 2021/8/3 Selling price 19,800 yen Bass reflex enclosure for 25cm unit of unknown manufacturer. 18mm plywood veneer finish It looks compatible with British units such as TANNOY and GOODMANS. There is a feeling of use such as bruises and peeling off the plate. (Mizushima Itsuro)
Accessories: none
Main specifications: Unit opening diameter 225mm W485 × H670 × D315mm 15.8kg
The price was reduced. 2021/8/3 Sales price 25,000 yen Bass reflex enclosure for 30cm unit of unknown manufacturer. 24mm plywood veneer finish There is a feeling of use such as bruises and peeling off the plate. (Mizushima Itsuro)
Accessories: Saran Net
Main specifications: Unit opening diameter 280mm Network opening W122 × H70mm W575×H865 × D355mm 26.5 kg
※Only 1 This will be a BOLERO enclosure only. ERABLE BLACK Terminal is also not included. If you are a user, why not play as a stock or as a 2-way speaker box? The appearance has no noticeable scratches. (YONEJIMA Satoshi)
Accessories: Saran Net
Main specifications: W200 × H360 × D225mm 4.7kg
※Only 1 This will be a BOLERO enclosure only. Rare ELABLE BLUE Terminal is also not included. If you are a user, why not play as a stock or as a 2-way speaker box? Appearance, there is no noticeable scratch (Satoshi Yoneshima)
Accessories: Saran Net
Main specifications: W200 × H360 × D225mm 4.7kg
This will be a BOLERO enclosure only. An unusual erable brown color. Terminal is also not included. If you are a user, why not play as a stock or as a 2-way speaker box? The appearance has no noticeable scratches. (YONEJIMA Satoshi)
Accessories: Saran Net
Main specifications: W200 × H360 × D225mm 4.7 kg/1 bottle
SANUSI EC-30, which will be in stock for the first time in a long time has arrived! It is an enclosure jointly developed by Sansui and JBL to allow the mounting of JBL 20cm units. Why don't you play with LE8T? The appearance is scratched and chipped in corners. Serial 57080606/57080685 (Satoshi Yonejima)
Accessories: Saran Net
Main specifications: 48L W390 × H590 × D290mm Weight 16kg
Disposal price cut! (Member discounts are not applicable) 2021/5/30 selling price 29,800 yen*It is cheap because of poor condition. This is an enclosure for 38cm woofers jointly developed by Sansui and JBL. The board is also thick and solid, so you can enjoy sound with a low center of gravity when using the JBL unit. The appearance has aging scratches, corner stains, etc. There is a darkening saran net (Asai no chi law)
Accessories: Saran Net
Main specifications: Content capacity 222L W590 × H980 × D470mm 48kg
The price was reduced. 2021/5/26 selling price 49,800 yen JBL standard 38cm enclosure. The reasonable size that makes use of the power of the 38 cm size is attractive. You can play in 2way depending on your preference or enjoy a variety of uses. There is a slight feeling of use such as rubbing and small scratches. (Mizushima Itsuro)
Accessories: none
Main specifications: Enclosure for 38cm unit (2226H recommended) Front bass reflex content volume 140 liters Minimum playback frequency 40Hz W546 × H775×D448mm 26kg
Model with JBL PA enclosure tuned up for audio. The upper and lower ducts play heavy bass in a multi-duct format, while the middle bass plays from the front roadhorn. The building is also quite firmly built, and you can see the popularity of the time. The appearance of the veneer has peeling, scratches and chips. There are also bonded spliners on the back. (Tamura Eiji)
Accessories: catalog
Main specifications: W760 × H920 × D630mm Weight 65kg
This is a baffle that had previously sold clang film eurodine. It seems to be a rice pine plywood baffle. Previous owner information said it was purchased at Western Lab (Yosuke Kojima)
Accessories: screws, bolts, logo badges
Main specifications: W1800 × H1800 × D900mm
This is a speaker system that mounts a limited 2,000 units of 10cm full-range unit Fe108SOL in a genuine box BK108SOL of limited 100 units. A well-balanced system that allows you to experience the sound unique to the backroad horn. In addition to the wide dynamic range and the width of the sound field, the high quality of the middle and high range is also the point. Appearance, there are some bruises. (Kimiya Miura)
Maintenance Information: 2021.6.2 Operation confirmed
Accessories: instruction manual, original box, saran net
Main Specifications: 10cm Cone Full Range Unit Frequency Band F0 to 35kHz Sound Pressure Level 90dB Impedance 8Ω Dimensions W300 x H882 x D440mm Weight 12.2kg
It is a 38cm woofer enclosure jointly developed by Sansui and JBL. The board is also thick and firm, so you can enjoy a thick sound with a low center of gravity when using the JBL unit. Appearance has aging small scratches dullness. There is a seal mark on the top plate. (Yuki Yamato)
Accessories: Saran net
Main Specifications: Contents 222L W590 × H980 × D470mm 48kg
Significantly reduced price. 2021/5/17 Price 150,000 yen MAXONIC Front Road Horn Type Bus Ref Enclosure It is made of rice pine plywood with a firm cat's eye and you will hear a dry sound when you hit it. The box resonates and brings out the performance of the unit itself. Damage such as scratches and dirt remain on the whole. (Itsuro Mizushima)
Accessories: None
Main Specifications: W770 × H1,000 × D605mm Unit Set Screw Hole Diagonal 370mm Approx. 50kg
price cut. 2021/5/13 Sales price 39,800 yen* Present passing. Barehorn Backload Horn Enclosure It is for 20cm full range and is similar to the ASB2081SOL of the company's kit, but it has slightly different dimensions, weight, and aperture diameter. The speaker terminal is slightly recessed in one place, but it can be used. (Takasaki Takasaki)
Accessories: None
Main Specifications: Opening 184mm W310 × H900 × D465mm 24.5kg
* Passing the status quo. Unspecified backload horn enclosure. It is designed for a full 12cm range and is made of 2 colors of wood for depth. There is a dent on one side top plate. (Takasaki Takasaki)
Accessories: None
Main Specifications: Opening 105mm W150 × H420 × D300mm 4.2kg
Price cut (2021.3.9 selling price 40,000 yen) Unspecified enclosure that mimics 828 capable of ALTEC 15 inches. The rear baffle mounting screw is missing. The appearance is matte paint, but there are individuals with a lot of tears and stains, and there are also parts that became brittle and crumble easily.
Accessories: None
Main Specifications: Aperture diameter 338mm Screw diagonal 382mm W760 × H1070 × D610mm Approx. 66 kg/This
I cut the price! 2020/11/25 selling price 5,000 yen YAMAHA professional 2-way speaker, S4115H MK2 enclosure only. There are some rubbing and scratches, but it is in a beautiful state for business use. ※ The back plate is not fixed with screws. (Yuki Yamato)
Accessories: Saran net (one side only)
Main specifications: W630 × H820 × D460mm (actual measurement including angle pad) 41.3 kg (actual measurement)
Below price (2020/4/18 selling price 69,800 yen) Double woofer enclosure for unknown JBL/38cm. Although there are many scratches, it is solid making, with casters, there are 2 handles on both sides, and usability seems to be good. (Takasaki Takasaki)
Accessories: Saran net
Main specifications: Unit opening diameter 357 mm Screw hole diagonal 370mm Actual measurement W640 × H1010 × D700mm Weight probably close to 80kg