※It is inexpensive because there are holes in the shelves and supports on the back. Large ADK audio rack with SW-01100 stacked on SW-211800. The position of the shelf board can be adjusted in 3 levels with a pitch of 3 mm. On the exterior, there are holes in the shelves and back supports. Also, there are chips, creases, and cracks on the sides. Shipping costs will be estimated separately (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W1,180 x H832 x D559 mm (actual measurement) estimated 80 kg or more
Comes with casters Hayami's 5-tier vertical audio rack shelf can be changed to a 16mm pitch. The 4-way open structure also has excellent heat dissipation. Sound countermeasures are also good with heavy weight MDF+particle board. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: 4 shelves, load: top plate/bottom plate 150 kg, adjustable shelf 50 kg W604H992 x D580 mm weight 58 kg
5 tier rack with glass doors by Denon The shelf can be changed depending on the dowel position. There is a scratch on Kusumi from time to time (Sasaki Shota)
Accessories: none
Main specifications: outer dimensions W580 x H1010 x D470 mm inner dimensions W533 x H866 x D450 mm 36 kg
Denon 3-tier rack with glass doors The shelf can be changed and moved according to the dowel position. There is a dull and small wound (Sasaki Shota)
Accessories: none
Main specifications: outer dimensions W580 x H540 x D470 mm inner dimensions W530 x H415 x D430 mm 12.2 kg (all measured, caster shelves are crowded)
It is a custom-made 4-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 450 mm x 3 shelf board size W280 x 350 mm pole 60 mm square W400 x H1590 x D440 mm 32.8 kg (actual measurement)
※ It is inexpensive because it has scuffs and dents. Comes with casters! Popular 5-tier rack with all spike support structure. It is sturdy with a metal frame. The size has been cut down to the last minute to the outer dimensions, and the internal dimensions have been expanded to the last minute in a space-saving design. It brings out the performance of the device with tight and accurate sound quality. There are abrasions and dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: 4 tier rack cast iron frame height adjustable (pitch 60 mm) W540 x H1175 x D483 mm approx. 48 kg
ADK 4-tier rack Uses highly designed natural wood and essential aluminum materials. The main body frame and inner plate are prevented from vibrating with special material spacers. The struts are interchangeable. The exterior has a slight feeling of use (Kanai Hidetsugu)
Accessories: spike, spike receiver
Main specifications: load capacity 100 kg (top plate/middle plate/bottom plate) shelf board thickness 23 mm 1st tier 230 mm 2nd tier 180 mm 3rd tier 180 mm W600 x H725 (excluding spikes) x D450 mm 16.5 kg
※Cello Audio Palette and Duet 350 were included. It is a custom-made 6-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 390 mm x 1 170 mm x 3 230 mm x 1 shelf board size W600 x 530 mm pole 60 mm square W695 x H1470 x D655 mm 70.9 kg (actual measurement)
※The GOLDMUND TELOS 600 was on board. It is a custom-made 5-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 320 mm shelf board size W600 x 530 mm pole 60 mm square W695 x H1595 x D655 mm 62.3 kg (actual measurement)
※The GOLDMUND TELOS 600 was on board. It is a custom-made 5-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 320 mm shelf board size W600 x 530 mm pole 60 mm square W695 x H1595 x D655 mm 62.3 kg (actual measurement)
The price has been drastically reduced. 2024/1/15 sales price 128,000 yen medium size model. Exclusive rack system for Choral series products. Components machined from aluminum blocks are used to ensure high rigidity and mass. It is a model with a structure that makes the product tilt when installed, and emphasizes visibility, operability, and design that can be used stylishly. The exterior is dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W500 x H125 x D270 mm Weight 6.3 kg
The price has been drastically reduced. 2024/1/15 sales price 128,000 yen small size model. A rack system dedicated to Choral series products. Components machined from aluminum blocks are used to ensure high rigidity and mass. It is a model with a structure that makes the product tilt when installed, and emphasizes visibility, operability, and design that can be used stylishly. There are parts of the exterior where the legs are discolored (Oikawa Tetsuji)
Accessories: none
Main specifications: W500 x H75 x D270 mm Weight 4.7 kg
※The GOLDMUND MIMESIS 28 was on board. It is a custom-made 5-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 320 mm shelf board size W600 x 530 mm pole 60 mm square W695 x H1595 x D655 mm 62.3 kg (actual measurement)
※There was a VIOLA BRAVO 4BOX on it. It is a custom-made 5-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 320 mm shelf board size W780 x 530 mm pole 60 mm square W875 x H1595 x D655 mm 71.7 kg (actual measurement)
Wooden 4-tier rack with casters from unknown manufacturer. The weight is light, and the shelves inside can also be adjusted with dowels, so it seems easy to use. On the exterior, you can see scratches, dullness, etc., feeling of use, installation marks, etc. (Mizusaki Ryo)
Accessories: casters
Main specifications: W580 x H1100 x D470 mm weight 16.5 kg (actual measurement)
Wooden 4-tier rack from unknown manufacturer. The weight is light, and the shelves inside can also be adjusted with dowels, so it seems easy to use. On the exterior, you can see scratches, dullness, etc., feeling of use, installation marks, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: W580 x H1100 x D470 mm weight 16.5 kg (actual measurement)
※The exterior is in poor condition, and the top plate screws are not genuine, so they are cheap. A sturdy 5-tier taowk rack. It has a calm color and seems to fit right in with the room. Overall, there is quite a feeling of use such as line scratches, dents, tape marks, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: load capacity 100 kg/1 tier shelf spacing 180 mm (top 3 tiers) 230 mm (bottom 1 tier) dimensions W600 x D550 x H943 mm weight 37 kg
This is a special rack for micro players. It is a combination of the F-8000 leg frame and the B-8000, which combines a glass board (G-8000) and a wooden board. Perfect for stabilizing larger record players. There are many stains, scratches, and stains on the exterior. ※Shipping costs will be estimated separately (Takimoto Yutaka)
Accessories: none
Main specifications: external dimensions W900xH485xD580mm upper glass surface dimensions W860xD540mm lower storage W800xH350xD500 mm 48.3 kg (actual measurement)
Rectany replacement needle rack How about for displays, etc. There are cracks and stains in places (Takasaki Atsushi)
Accessories: none
Main specifications: W396×H560×D130mm
This rack is made of particle board with a thickness of 30 mm. The shelves can be adjusted in 5 levels and can be set according to the model you are using. The holes on the top plate and bottom are originally empty for joints. On the exterior, there are insulator marks and peeling on the top plate. (Miura Kimiya)
Accessories: No accessories
Main specifications: W531 × H422 × D440 mm 20.1 kg
This rack is made of particle board with a thickness of 30 mm. The shelves can be adjusted in 5 levels and can be set according to the model you are using. The holes on the top plate and bottom are originally empty for joints. There are insulator marks and bumps on the exterior. (Miura Kimiya)
Accessories: No accessories
Main specifications: W531 × H422 × D440 mm 20.1 kg
An ADK 2-tier rack that can be stacked to build a rack of your choice. You can get a unit of a different size from the same series and change it to your own specifications. There are exterior, slight damage, rust on screws, etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: upper height 170 lower height 250 mm W574 x H525 x D497 mm 28 kg (actual measurement)
The price has been reduced. 2023/12/27 sales price 128,000 yen small size model. Exclusive rack system for Choral series products. Components machined from aluminum blocks are used to ensure high rigidity and mass. It is a model with a structure that makes the product tilt when installed, and emphasizes visibility, operability, and design that can be used stylishly. (TAMURA Eiji)
Accessories: none
Main specifications: W500 x H75 x D270 mm Weight 4.7 kg
The price has been reduced. 2023/12/27 sales price 128,000 yen medium size model. Exclusive rack system for Choral series products. Components machined from aluminum blocks are used to ensure high rigidity and mass. It is a model with a structure that makes the product tilt when installed, and emphasizes visibility, operability, and design that can be used stylishly. (TAMURA Eiji)
Accessories: original box
Main specifications: W500 x H125 x D270 mm Weight 6.3 kg
*This is an unopened item. SKB rotating CD and DVD D rack It can hold approximately 480 CDs and 192 DVDs (Daiki Goto)
Accessories: original box
Main specifications: W300 x H1560 x D300 mm weight 20.3 kg
This is a shelf board for the SOUNDMAGIC AV03 series. There is a feeling of use such as scratches (Daiki Goto)
Accessories: none
Main specifications: W1138 x H20 x D470 mm weight 6.7 kg (actual measurement)
This is a shelf board for the SOUNDMAGIC AV03 series. There is a feeling of use such as scratches (Daiki Goto)
Accessories: none
Main specifications: W1138 x H20 x D470 mm weight 6.7 kg (actual measurement)
This is a shelf board for the SOUNDMAGIC AV03 series. There is a feeling of use such as scratches (Daiki Goto)
Accessories: none
Main specifications: W1138 x H20 x D470 mm weight 6.7 kg (actual measurement)
ADK 3-tier rack Of course, other rack units can be stacked and used. Depending on the size of the device, you can change the rack to your liking. There is a feeling of use due to appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W574 x H730 x D497 mm kg (actual measurement) upper height 170 middle height 170 lower height 250 (mm)
Stylish audio rack made in England All frames are solidified by welding and are firm. The marble-like glass top plate also has an elegant appearance and seems to blend well into the living room. There are 4 rubber bushings and a glass board on it. The height of the shelf cannot be changed. The exterior is scratched, dull, and has a feeling of use such as tape marks (Ryo Mizusaki)
Accessories: spike holder
Main specifications: W585 x H830 x D380 mm glass plate W430 x H6 x D360 mm above the shelf 131 mm 131 mm 150 mm 198 mm weight 22.9 kg (all actual measurements)
Casters and spikes included! TAOC 3-tier audio rack. It is well-made and very stable. Casters with stoppers are easy to set. The exterior is dull on the frame, there are some small scratches, and a feeling of use (Kobayashi Hitoshi)
Accessories: instruction manual, spike, spike base, tools
Main specifications: upper height 180 mm, lower height 230 mm W530 x H600 x D630 mm 24 kg
Horizontal 3-tier rack for target audio. It is an orthodox rack that supports wooden shelves with an iron frame. It's designed to be lightweight and easy to use, and comes with casters, so it's easy to move around. There are some scratches and stains on the exterior (Tamura Eiji)
Accessories: no accessories
Main specifications: size W700 x D395 x H565 mm (including casters) shelf board W660 x D355mm (actual measurement) between shelves 190 mm for the 1st and 2nd tiers
The price has been reduced! 2023/12/16 Sales price 22,000 yen*There is a slight gap between the top plate and the support in only one place, and there is rattling. Comes with casters! Hamilex glass 5-tier rack The top plate and shelves are made of tempered glass and are racks with excellent load bearing capacity. The exterior has a feeling of use such as dullness and small scratches. ※Shipping costs will be estimated separately (Hiroki Aso)
Accessories: casters
Main specifications: load capacity 80 kg on the top plate, 30 kg on the shelf board, total load capacity 150 kg, W650 x H891 x D560 mm, weight 44.5 kg
※Since there are major scratch repairs on the shelves, they are inexpensive. Comes with casters! Taoc's stylish 3-tier rack. It is an audio rack with excellent damping properties, with a vibration-damping coating applied to a 5-layer structure made of MDF material and cast iron powder. Metallic brown color In addition to the scratch on the top surface, there are small scratches here and there (Murakoshi Yoichi)
Accessories: none
Main specifications: shelf height upper level: 280 mm, lower level: 330 mm, W600 x H774 x D526 mm, 21 kg
Sound Magic audio rack It has a compact appearance and an elegant Scandinavian design. It combines excellent reproduced sound with interior design. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: spike holder
Main specifications: total load capacity within 100 kg, 1 stage load capacity 50 kg, W556 x D380 x H494 mm, weight 10 kg
This is a self-made wooden 4-tier rack. A stone-like board (probably made of ceramic) is attached to the top plate. Designed to be easy to use with movable shelves that can also change shelf positions (Fujisawa Yukishi)
Accessories: none
Main specifications: Outer dimensions W645 x H813 x D510 mm, front entrance inner dimensions W530 mm, weight about 20 kg
ADK 4-tier rack. There are 2 shelves with a thickness of 26 mm, and they can be adjusted up and down, making this one easy to use. This is a high quality rack with a full body made of solid natural wood that goes well with any interior. In addition to scratches and dullness, there are veneer cracks of about 3 cm on the pillar. (GOTO Daiki)
Accessories: none
Main specifications: size W660 x D560 x H700 mm, weight 30 kg, shelf board, weight capacity 100 kg
The price has been drastically reduced! 2023/12/3 sales price 148,000 yen A QAVM series 4-tier rack that can be installed with plenty of room for large amplifiers, AV amplifiers, etc. The shelves are oak, the poles are silver 32mm in diameter, and the casters are SQCST-50/32MS. The exterior has dullness, insulator marks, and line scratches (Yonejima Satoshi)
Accessories: no accessories
Main specifications: W1,085 x H882 x D500 mm (including casters) The spacing between shelves is 256 mm, 216 mm, 180 mm from the bottom, maximum load up to 200 kg when using QCST50 caster legs
Glass 4 tier rack. While the shelves are made of glass, the sides have a firm frame and are reasonably strong. The height of the shelf is variable, so you can assemble it according to the height of your amplifier. The exterior has small scratches and dullness. (YONEJIMA Satoshi)
Accessories: spike, spike holder
Main specifications: W560 x H900 x D400 mm
Glass 4 tier rack. While the shelves are made of glass, the sides have a firm frame and are reasonably strong. The height of the shelf is variable, so you can assemble it according to the height of your amplifier. The exterior has small scratches and dullness. (YONEJIMA Satoshi)
Accessories: spike, spike holder
Main specifications: W560 x H900 x D400 mm
ADK 4-tier rack. There are 2 shelves with a thickness of 26 mm, and they can be adjusted up and down, making this one easy to use. This is a high quality rack with a full body made of solid natural wood that goes well with any interior. The exterior is scratched, dull, etc., and there is a feeling of use (Goto Daiki)
Accessories: none
Main specifications: size W660 x D560 x H700 mm, weight 30 kg, shelf board, weight capacity 100 kg
This is TAOC's horizontal 3-tier rack. The shelves are made of high-density MDF with high vibration absorption, and are coated with a special coating that also has vibration control performance. The load capacity is also perfect, at 150 kg per stage, for a total of 450 kg, and it can handle large equipment. Various developments are possible with optional parts pillars. There is a feeling of use such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: None (wrench missing)
Main specifications: Shelf height: top 150 mm, bottom 250 mm, shelf inner width 540 mm, W1200 x H501 x D470 mm 28 kg
TAOC's 3-tier rack Spike specification It is a rack with an excellent sense of stability, with a structure that pursues ease of assembly, and special damping material inserted into the 21mm high-density MDF shelves and supports. The dimensions between the shelves are 250 mm on the top and 250 mm on the bottom. There are line scratches and dents on the shelf board (Fujisawa Yukishi)
Accessories: spikes
Main specifications: load capacity (per step) 100 kg (overall) 400 kg pole length 250/250 mm W600 x H640 x D500 mm approx. 16 kg
Sound Magic AV 3-tier rack with casters. The back has been given a round cut so that cables are easy to put together, and the interior is also highly decorative. There is a feeling of use, dullness, and small scratches (Sasaki Shota)
Accessories: spikes, spike holders, tools, casters
Main specifications: (actual measurement) Height between upper shelves 178 mm Height between lower shelves 230 mm W1667 x H590 x D476 mm Weight 43 kg
※It has a 5-tier design with 5 shelves. It has a metal frame and is sturdy. A space-saving design where the outer dimensions have been cut down to the last minute and the inner dimensions have been expanded to the last minute. It brings out the performance of the device with tight and accurate sound quality. The exterior has scuffs and rust spots on the whole (Mizusaki Ryo)
Accessories: none
Main specifications: 5 tier rack cast iron frame shelf spacing 140/140/140/190 mm W540 x D484 x H935 mm 41 kg
A popular 3-tier rack. It has a metal frame and is sturdy. The size is a space-saving design where the outer dimensions have been cut down to the last minute and the inner dimensions have been expanded to the last minute. The tight and accurate sound quality brings out the performance of the device. The exterior has dullness, scuffs, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: 3-tier rack, load capacity up to 50 kg, shelf spacing 140/310 mm, W540 x D484 x H655 mm, 31 kg
A popular 3-tier rack. It has a metal frame and is sturdy. The size is a space-saving design where the outer dimensions have been cut down to the last minute and the inner dimensions have been expanded to the last minute. The tight and accurate sound quality brings out the performance of the device. The exterior has dullness, scuffs, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: 3-tier rack, load capacity up to 50 kg, shelf spacing 140/310 mm, W540 x D484 x H655 mm, 31 kg
※It has a 5-tier design with 5 shelves. It has a metal frame and is sturdy. A space-saving design where the outer dimensions have been cut down to the last minute and the inner dimensions have been expanded to the last minute. It brings out the performance of the device with tight and accurate sound quality. The exterior has scuffs and rust spots on the whole (Mizusaki Ryo)
Accessories: none
Main specifications: 5 tier rack cast iron frame shelf spacing 140/140/140/190 mm W540 x D484 x H935 mm 41 kg
※It has a 5-tier design with 5 shelves. It has a metal frame and is sturdy. A space-saving design where the outer dimensions have been cut down to the last minute and the inner dimensions have been expanded to the last minute. It brings out the performance of the device with tight and accurate sound quality. The exterior has scuffs and rust spots on the whole (Mizusaki Ryo)
Accessories: none
Main specifications: 5 tier rack cast iron frame shelf spacing 140/140/140/190 mm W540 x D484 x H935 mm 41 kg