2-tier set of base rack PBL3621+ rack unit PL3621-15 The J1 Project rack is well known for its high sound quality racks. The sound quality with high SN and effective braking will bring out the full potential of the device. There are small wounds and dullness (Fujisawa Yukishi)
Accessories: spike, spike base
Main specifications: step height 150 mm W450 x H270 x D300 mm 4.86 kg
Heavyweight horizontal audio rack It has a sturdy construction, so it's safe to put a super dreadnought analog player on the top plate. The inside is slightly large, and even slightly larger full-size equipment can be stored. The exterior has lines and abrasions on the top plate and dirt on the shelf board (Mizusaki Ryo)
Accessories: none
Main specifications: maximum storage value of audio equipment W530 x H220 x D520 mm dimensions W1200 x H440 x D560 mm weight 70 kg
Heavyweight horizontal audio rack It has a sturdy construction, so it's safe to put a super dreadnought analog player on the top plate. The inside is slightly large, and even slightly larger full-size equipment can be stored. There are scratches and repair marks on the exterior. The screw cap on the top plate is missing (Sasaki Shota)
Accessories: none
Main specifications: maximum storage value of audio equipment W530 x H220 x D520 mm dimensions W1200 x H440 x D560 mm weight 70 kg
An audio rack that combines 2 tiers of Taok's MSMK2-3L horizontal rack with MSMK2-SF shelves. The structure pursues ease of assembly, and special damping materials are inserted into the struts. The tight sound is attractive. The legs have spikes, and spike holders are not included. There are some abrasions and line scratches on the shelves (Murakoshi Yoichi)
Accessories: spike holder
Main specifications: upper stage W600 x H260 mm lower stage H230 mm W1140 x H590 x D500 mm 26 kg (all outer dimensions, actual measurements)
Comes with casters! Hamilex glass vertical standard open rack. The impact of heavy and delicate glass. The “Verita” series is designed as if the device that comes up makes the case claim. It comes with convenient casters. A slight feeling of use remains, such as dullness and insulator marks (Itsuro Mizushima)
Accessories: none
Main specifications: total load capacity 150 kg shelf height 170/170/220/220 mm W650 x D560 x H955 mm approx. 45 kg
Heavy duty 4-tier rack made by Denon Glass is used on the upper surface of each shelf board, giving it a sense of luxury. The height can be adjusted to 4 levels with the 2 steps in between. Traces, scratches, and dullness of rubber are scattered (Kanai Hidetsugu)
Accessories: none
Main specifications: body thickness 50 mm shelf board thickness 30 mm W650 x H695 x D520 mm approx. 60 kg
ADK/STC series 3-tier racks that can be stacked together to create a rack of your choice. The full-body, natural wood is made of solid wood, and the tasteful finish is attractive. There is a feeling of use such as small scratches and dullness (Murakoshi Yoichi)
Accessories: instruction manual
Main specifications: W574 x H790 x D500 mm 44 kg
It is a set of STC-B225FWN and STC-A223FWN · STC-A217FWN. It is easy to assemble large amplifiers with a rack that is roomy and wide. The sturdy construction makes it possible to incorporate heavy amplifiers and players into the top plate. The exterior is dull, dirty, and scratched (Kimiya Miura)
Accessories: no accessories
Main specifications: [STC-B225FWN] W1,109 x D500 x H320 mm 35 kg load capacity 100 kg (top plate) [STC-A223FWN] W1,109 x D500 x H265 mm 22 kg load capacity 100 kg (top plate) [STC-A217FWN] W1,109 x H205 x D500 mm 20 kg load capacity 100 kg (top plate)
Denon tempered glass inlaid 3-tier rack. The height of the shelves can be changed in 4 steps. A 50mm thick high density particle board is used on the outside, and a 30mm thick high density particle board inlaid with tempered glass is used for the shelf board. The top plate is decorated with glass, so it has a sense of luxury. There is a thin piece of rubber on the top plate that cannot be removed, and there are many insulator marks, scratches, and dullness (Kanai Hidetsugu)
Accessories: none
Main Specifications: Loading Limit Weight: Top Plate/Bottom Plate 100 kg Shelf Board 50 kg W650 x H540 x D520 mm 50 kg
*Casters and glass doors are not included. Particle board PVC veneer upholstered audio rack. Two movable shelves with 2 dowel positions are included. ※The shipping fee will be estimated separately (Fujisawa Koshi)
Accessories: none
Main specifications: W1200xH500xD560mm approx. 55kg
The price has been reduced. 2023/2/10 sales price 15,000 yen*It is inexpensive because the exterior is in poor condition. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, and it firmly supports even heavyweight amplifiers. On the exterior, there are bumps, lines, and insulator marks on the shelves (Satoshi Yonejima)
Accessories: no accessories
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
The price has been reduced. 2023/2/10 sales price 15,000 yen*It is inexpensive because the exterior is in poor condition. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, and it firmly supports even heavyweight amplifiers. The exterior has bumps, scratches, insulator marks, etc. (Satoshi Yonejima)
Accessories: no accessories
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
The price has been reduced. 2023/2/10 sales price 19,800 yen*It is inexpensive because the exterior is in poor condition. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, and it firmly supports even heavyweight amplifiers. The exterior has bruises, lines, and dullness (Satoshi Yonejima)
Accessories: no accessories
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
The price has been reduced. 2022/10/7 sales price 25,000 yen heavyweight horizontal audio rack. It has a sturdy construction, so it's safe to put a super dreadnought analog player on the top plate. The inside is slightly large, and even slightly larger full-size equipment can be stored. The exterior has lines and scratches on the top plate, and dents and scratches on the sides and shelves (Kanai Hidetsugu)
Accessories: none
Main specifications: overall measurement W1200 x H535 x D572 mm inner dimensions (without shelves) W530 x H430 x D (top plate 560, middle plate 470, bottom 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
Hamilex heavyweight audio rack. The height of the middle plate can be adjusted in 3 levels. It is a wooden rack characterized by its high weight and stable mid to low frequencies. There is no noticeable major damage, but there are small scratches and a feeling of use. There are 3 blindfold covers on the top plate missing. I will estimate the shipping fee separately (Fujisawa Koshi)
Accessories: none
Main specifications: shelf height below 180 to 235 mm (3 step adjustment) W650 x H540 x D560 mm 44 kg (actual measurement)
Horizontal quadra spire 4-tier rack Devices with depth and width can also be installed with plenty of room, so it's perfect for those who are thinking about building a relatively large audio system. The exterior has paint chips on the pillars and footprints on the shelves. It is a flat base type (Sasaki Shota)
Accessories: nothing
Main specifications: 4-tier rack, 32 mm black pole, distance between each shelf, 326 mm/216 mm/256 mm from above, W1085 x H970 x D485 mm (actual measurement)
The legs are flat. Popular quadra spire 4-tier rack 19mm pole specification. In addition to the excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is slightly curved so that vibrating components gather at the four corners. There are thin rubber footprints on the shelves, but they are fine with no noticeable scratches (Fujisawa Yukishi)
Accessories: none
Main specifications: 4-tier rack, 2nd tier 215 mm, 3rd tier 215 mm, 4th tier 256 mm W595 x H800 x D478 mm
Comes with exclusive casters! ADK's stylish horizontal racks have arrived. There is no pillar in the center, so a clean display with plenty of room is possible. There are scratches and line marks on the exterior (Tamura Eiji)
Accessories: instruction manual, flat legs
Main specifications: load capacity 150 kg 1st stage 220 mm 2nd stage 170 mm W1100 ✕ H588 ✕ D450 mm weight 27 kg
The price has been reduced! 2023/1/23 sales price 59,800 yen popular 4-tier audio rack with casters (CS-120). It has a sturdy construction with a metal frame. A space-saving design where the outer dimensions were cut down to the last minute and the inner dimensions were extended to the last minute. It brings out the performance of the device with tight and accurate sound quality. The exterior has a sense of use over time, such as dullness and small scratches scattered around (Hiroki Aso)
Accessories: casters
Main Specifications: 4 tier rack cast iron frame W540 x D484 x H935 mm 41 kg
This is ADK's AV rack. It is well-made with a structure that makes full use of the robustness of the audio rack. There are traces of placement on the top plate, and there is dullness all over (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1140 x H432 x D330 mm weight 20 kg top plate load capacity 50 kg
The price has been reduced. 2022/12/25 sales price 32,800 yen ※Since there are many scratches, it is inexpensive. ADK's classic 3-tier rack. The full-body, natural wood design blends beautifully with the interior. The shelves can be dismantled and adjusted up and down. There are many scratches and bumpy marks on the exterior (Kobayashi Hitoshi)
Accessories: none
Main specifications: external dimensions W660 mm x D560 mm x H475 mm approx. 22 kg
Comes with special casters (CS-120)! The popular TAOC SS series audio rack. It has a sturdy construction with a metal frame. The size is a space-saving design where the outer dimensions have been cut down to the last minute, and the inner dimensions have been extended to the last minute. Tight and accurate sound quality brings out the performance of the device. The exterior has a feeling of use such as dullness, small scratches, bald paint, etc. (Hiroki Aso)
Accessories: casters
Main specifications: load capacity 50 kg Frame: steel shelf board 5 layer structure board (thickness 22 mm) size W660 x D500 x H120 mm weight 13.5 kg (actual measurement)
Comes with special casters (CS-120)! TAOC SS series 1 tier rack. The strong construction brings out the performance of the equipment. The sound quality is typical of the SS series, which is tight and tight. On the exterior, there is a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: casters
Main specifications: load resistance 50 kg, inner dimensions W488 x D439 mm, size W540 x H120 x D485 mm, weight 10 kg (actual measurement)
Comes with special casters (CS-120)! TAOC SS series 1 tier rack. The strong construction brings out the performance of the equipment. The sound quality is typical of the SS series, which is tight and tight. On the exterior, there is a feeling of use, such as dullness, small scratches, and tape marks scattered around (Hiroki Aso)
Accessories: caster (CS-120) ※1 with stopper
Main specifications: load resistance 50 kg, inner dimensions W488 x D439 mm, size W540 x H120 x D485 mm, weight 10 kg (actual measurement)
* It is inexpensive because the sticker on the attached plate has peeling, dents, footprints, etc. It has a sturdy construction with a board thickness of 50 mm. The position of the shelves can be changed in 3 steps*Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: W615 x H454 x D550 mm 37.0 kg (actual measurement)
※It is inexpensive because it is in poor condition such as rust, tape marks, and dirt. Popular all-spike support structure 5-tier rack. It has a sturdy construction with a metal frame. A space-saving design where the outer dimensions have been cut down to the last minute and the inner dimensions have been expanded to the last minute. It brings out the performance of the device with tight and accurate sound quality. The exterior has dirt and tape marks throughout. Also, there are no spikes for shelves. (Miura Kimiya)
Accessories: spike
Main specifications: cast iron frame W540 x H1175 x D483 mm approx. 51 kg
Includes 4 shelves ADK's large audio rack. The height can be adjusted with 3 steps at the top and 5 steps at the bottom (30mm pitch). There are dents on the lower front corner, linear stains on each shelf, and other small scratches. Shipping costs will be estimated separately (Murakoshi Yoichi)
Accessories: none
Main specifications: load capacity 100 kg (top plate) W1209 x H726 x D520 mm body weight 62 kg
The price has been reduced. 2022/12/25 sales price 13,000 yen This is a bottom plate for ADK's popular series SD (probably RO) series. How about replacing an audio board or splitting the rack you currently have? There are small scratches and abrasions on the top face abutment and strut attachment (Murakoshi Yoichi)
Accessories: 4 mounting screws
Main specifications: W620 x H40 x D556 mm
The price has been reduced. 2022/12/25 sales price 13,000 yen This is a top plate for ADK's popular series SD (probably RO) series. How about replacing an audio board or splitting the rack you currently have? There are many deep scratches on the side of the top surface, and abrasions all over the pole attachment and bottom. ※4 mounting screws are missing (Murakoshi Yoichi)
Accessories: none
Main specifications: W620 x H40 x D556 mm
※Although it was an unopened item, I opened it for a photo shoot. Horizontal rack made of Asahi Lumber. This model has plenty of storage capacity and can even be adjusted in height. As an audio rack, its performance is high, and it is a stable unit. The full-body natural wood construction is sturdy, and the interior is also high. ※Since it is a large product, shipping costs will be estimated separately (Satoshi Yonejima)
Accessories: original box
Main specifications: W1,236 x H783 x D566 mm 67.5 kg
The price has been drastically reduced! 2022/12/30 sales price 59,800 yen The details are unknown, but this is an audio rack with a sturdy construction and a high design. A small record player can be stored when the top plate is opened. The height of the shelf is also finely adjustable, and the height can be adjusted with an amplifier. There are chips and scratches on the exterior. (TAMURA Eiji)
Accessories: shelves ✕ 4
Main specifications: W893 ✕ H915 ✕ D428mm
An audio rack designed with the Eiffel Tower as a motif. The wiring on the back side is also easy and convenient. There are many abrasions on the shelves and frames (Murakoshi Yoichi)
Accessories: none
Main specifications: 170,240,240 mm from above shelf spacing (2 middle plates can be adjusted at a pitch of 4.5 cm) load bearing top, bottom plate 50 kg, middle plate 25 kg W609.4 x H779.5 x D518.3 mm
※Shelf board only. This is an additional shelf board for Taok CL series. Dark brown metallic color. High-density MDF, which pursues high rigidity traditional TAOC, is used for the shelves (Fujisawa Yukishi)
Accessories: none
Main specifications: W600 x H15 x D520 mm 4.7 kg (actual measurement)
A very rare TASCAM console rack. An open reel deck with panels similar to a 19-inch rack can be mounted. It can be fixed horizontally, vertically, 30 degrees, and 60 degrees, and various changes are possible depending on the application. There are stains and scratches on the exterior (Tamura Eiji)
Accessories: instruction manual
Main specifications: W564 x H805 x D700 mm Weight about 13 kg
TAOC 5-tier rack with casters. The high quality comes with origami, isn't it? The high position of the shelf feels good! The height of the pillars is 200mm, 200mm, 250mm, and 350mm from below. The exterior has dullness, abrasions, and bruises (Kobayashi Hitoshi)
Accessories: none
Main specifications: W600 x H1205 x D520 mm 28.5 kg (actual measurement)
The price has been drastically reduced! 2022/12/14 sales price 16,000 yen*The exterior is in poor condition and is painted matte black, so it's cheap. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, and it firmly supports even heavyweight amplifiers. The exterior is dull with bumps and line wounds (Kimiya Miura)
Accessories: no accessories
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
A brightly colored single-tier rack. The veneer peels off on the upper back, and there are footprints on the top plate (Oikawa Tetsuji)
Accessories: instruction manual
Main specifications: W540 x H200 x D440 mm 8.3 kg
A rack from an unknown manufacturer made of thick shelves. The height of the left and right shelves can be adjusted with dowels. The casters make settings easier and more convenient (Murakoshi Yoichi)
Accessories: none
Main specifications: the inner width of the shelf to the left is 480, the center is 295, the right is 440 mm W1310 x H900 x D500 mm
※It is inexpensive because the support plate on the back is missing. ADK (Asahi Woodworking) audio rack base unit STC-B125FWN. It is a stackable model. Scratches, gouges, etc. are scattered (Daiki Goto)
Accessories: none
Main specifications: full body natural solid wood specification top plate vs. load 100 kg W574 x H320 x D500 mm 20 kg
This is a top plate for ADK's popular SD (probably RO) series series. How about replacing an audio board or splitting the rack you currently have? There are small scratches and abrasions on the top face abutment and strut attachment (Murakoshi Yoichi)
Accessories: 4 mounting screws
Main specifications: W620 x H40 x D556 mm
The price has been reduced. 2022/12/19 sales price 10,000 yen*It has been painted, has many scratches, and is inexpensive because the shelves are missing. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, which firmly supports even heavyweight amplifiers (Oikawa Tetsuji)
Accessories: none
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
The price has been reduced. 2022/12/19 sales price 15,000 yen*Inexpensive because it has many scratches and is not in good condition. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, and it firmly supports even heavyweight amplifiers. The dowel screw is not genuine (Oikawa Tetsuji)
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
The price has been reduced. 2022/12/19 sales price 18,000 yen*Inexpensive because it has many scratches and is not in good condition. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, which firmly supports even heavyweight amplifiers (Oikawa Tetsuji)
Accessories: none
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
The price has been reduced. 2022/12/19 sales price 15,000 yen*Inexpensive because it has many scratches and is not in good condition. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, which firmly supports even heavyweight amplifiers (Oikawa Tetsuji)
Accessories: none
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
Alphason's horizontal 3-tier rack. with spikes. Up to 3 models of thin systems can be stored, making it suitable for storing compact systems. The exterior has dullness, paint baldness, and scratches (Yonejima Satoshi)
Accessories: instruction manual
Main specifications: W600 x D385 x H490 mm between shelves 173 mm 11.8 kg (actual measurement)
Target Audio 5-tier rack! Recommended for those using a compact system with a simple design. The exterior is dull, scratched, and dirty (Tamura Eiji)
Accessories: spike
Main specifications: W510 x H845 x D400 mm (actual measurement) stages 1 to 4:165 mm
This is a particle audio rack from Wakatsuki Seisakusho. Dark brown with a subdued wood grain finish. Rattling is prevented by locking the shelves with a screwdriver. The exterior has bumps and peeling marks (Kimiya Miura)
Accessories: no accessories
Main specifications: W1197 x D605 x H535 mm 60 kg Effective inner dimensions W524 x D527 x H400 x 2 rows shelf board thickness 24 mm (can be moved with 30 mm pitch) Effective top plate depth 585 mm top plate load capacity 100 kg shelf board load capacity 30 kg
with spikes. As you can see, it looks like target audio. The size design is ideal for small amplifiers, etc. The exterior has line marks, stains, and oxidation (Tamura Eiji)
Accessories: none
Main specifications: W505 x H125 (including spikes) x D395 mm
England, which is said to have good sound loss, is a simple rack for target audio. The frame is made of metal and the board is wood. There is a big scratch on the shelf board (Fujisawa Yukishi)
Accessories: none
Main specifications: plate spacing: approx. 340 mm, W510 x H500 x D410 mm (actual measurement), weight 7.9 kg
The price has been reduced. 2022/12/9 sales price 49,800 yen TAOC 4-tier rack. Comes with casters. The vibration damping performance of the shelves was greatly improved with a special coating containing metal powder. The struts will be 150, 150 and 150 mm. There is a feeling of use such as scratches and repair marks on the top plate (Itsuro Mizushima)
Accessories: none
Main specifications: load capacity 100 kg (1 stage) W600 x H635 x D520 mm 22.2 kg