* It is cheap because the phono cable is out of stock. Grace wood framed tone arm The material is made of tender teak wood, and it is an arm with high processing accuracy like Grace. The support method is an oil dump of one-point support, and the head shell part is a replacement method with a dedicated shell. For cartridges with relatively light needle pressure. The exterior has marks of the armrest on the wooden arm part, and the metal part has rust and dullness. Serial 1516 (Hiroki Aso)
Maintenance Information: 2022.5.16 Confirmation
Accessories: Dedicated shell x 2 mounting screws
Main specifications: static balance, one point support, oil dump type, effective length 237 mm, compatible cartridge 4 to 13 g, needle pressure range 0 to 3 g
The price has been drastically reduced! 2022/4/20 sales price 89,800 yen A rare DECCA dedicated arm has arrived! Combination with Garrard 301 and Torrence TD-124 is recommended! It's a rare opportunity, so please give it a try. (Kimiya Miura)
Maintenance Information: 2022.4.20 Confirmation
Accessories: original box, connecting cable, armrest, screws
Main specifications: Static balance type total length 300mm execution length 225mm overhang 15mm needle pressure range 2g
The price has been reduced. 2021/7/14 selling price 59,800 yen DECCA MARK 1, 2, 3 cartridge dedicated tone arm. Simple structure using straight pipes. Since the needle pressure is a dedicated arm, it is preset and set to an appropriate value. It is conceived to maintain an optimal state for the head of the company. There is a kusumi on the exterior. (Fujisawa Koshi)
Maintenance Information: 2011.6.4 Maintained (reworked internal wiring check with pivot backlash
Accessories: armrests
Main specifications: Static balance type total length 303 mm execution length 225 mm
The price has been reduced. 2022/4/13 sales price 50,000 yen*Currently sold goods. A rare wooden tone arm from Grado, which was acclaimed by Stereo Sound magazine, is in stock. The beautiful curves and sleek design of the gun stock type walnut are excellent, and it is an arm that is the cornerstone of the Fifty's sound. * The included self-made base cannot be used by the player as it is, so please prepare the base by yourself (Fujisawa Koshi)
Maintenance Information: 2022.4.13 Confirmation
Accessories: instruction manual
Main specifications: Dynamic balance type 0.5kg (actual measurement)
The price has been reduced. 2022/4/21 Sales price 15,000 yen Replacement arm pipe for Audio Craft AC-3000 It is a model with a slightly thicker root than the MC-S/T (Fujisawa Koshi)
Maintenance Information: 2022.4.21 Confirmation
Accessories: None
Main specifications: own weight 36.7g
The price has been reduced. 2022/5/2 selling price 59,800 yen Fully disassembled and fully restored. A lightweight needle pressure tone arm that is an improved model of the 3009S2. Specialized for light needle pressure, narrowed down the application, and sharpened sharpness is attractive. You can enjoy the crisp notch and the large amount of information typical of an analog disc. The stoic and beautiful design that looks like a precision machine is also excellent (Shota Sasaki)
Maintenance information: 2022.5.2 Maintained (We have fully disassembled, cleaned each part, and repair/maintenance of the following items. Lifter: Disassembly, Cured Grease Removal & Internal Cleaning, Grease Replacement, Descent Speed & Up/Down Position Adjustment Bearings: Disassembly, O-Ring Shaft & Shaft Polishing, Sensitivity Adjustment (Horizontal/Vertical) Head shell: adjuster disassembly, cleaning, polishing. Replaced all internal wiring Knife edge cleaning and polishing Earth point polishing and earth wire replacement. Screening scan (connector part): Absorption of deteriorated solder, terminal part polishing. Replacement cushion rubber for arm base fixing (4 pieces) Phono cable: continuity test, RCA terminal wire polishing. IFC Weight Lot: Pulley shortage is difficult to purchase single parts, so we replace it with one with a black resin part on the top. (Comprehensive inspection, continuity confirmation test)
Accessories: phono cable
Main specifications: Static balance type needle pressure 0 to 1.5 g Cartridge dead weight 4 to 9 g
The price has been drastically reduced. 2022/4/24 Sales price 138,000 yen* Ladder weight is being ordered (it will take several months to arrive, so we will send it after arrival) It is a 3009 Series 2 that has been thoroughly maintained. Sharp, sharpened followability and solid tone due to the metallic knife edge are attractive. You can enjoy the crisp notch and the large amount of information typical of an analog disc. The stoic and beautiful design that looks like a precision machine is also excellent (Yoichi Murakoshi)
Maintenance Information: 2022.4.23 Maintenance (Elastic coupling replacement after total disassembly, parts cleaning, inspection. Lifter disassembly, internal cleaning, grease replacement, descent speed adjustment. Bearing disassembly, O-ring shaft, shaft polishing, sensitivity adjustment (horizontal and vertical). Head shell adjuster disassembly, cleaning, polishing. Replaced all internal wiring Knife edge cleaning and polishing Grinding the ground point, replacing the ground wire. Screening scan (connector part) Degraded solder suction, terminal part polishing. Replacement cushion rubber for arm base fixing (4 pieces) Phono cable S2 genuine cable+RCA plug (medium model or earlier) replacement. (Comprehensive inspection, continuity confirmation test.)
Accessories: phono cable, instruction manual (copy)
Main specifications: Short arm static balance type total length 265mm overhang 15mm needle pressure (when 1 rider weight is installed) 1 memory 0.25g step/0g to maximum 2.5g needle pressure ( (When 2 rider weights are installed) 1 memory 0.5 steps/0g to maximum 5g cartridge dead weight 28g
A model that specializes in light needle pressure of 3009S2 and narrows down applications. Sharp followability that has been sharpened is attractive. You can enjoy the crisp notch and the large amount of information typical of an analog disc. The stoic and beautiful design that looks like a precision machine is also excellent. There is a little feeling of use, kusumi (Kanai Hidetsugu)
Maintenance information: 2022.5.5 sound confirmed
Accessories: instruction manual, phono cable
Main specifications: Static balance type needle pressure 0 to 1.5 g Cartridge dead weight 4 to 9 g
* There are no accessories such as needle pressure gauge (DS-1). The popular arm of Orthophone is in stock. The short special spring and its structure are not affected by external vibration, and can handle needle pressure up to 5.0. The counterweight is needle bell-shaped, has a low center of gravity, and has a low center of gravity structure that is balanced with the cartridge weight (Yoichi Murakoshi )
Maintenance Information: 2022.4.28 Confirmation
Accessories: phono cable, instruction manual (copy)
Main specifications: Dynamic balance short arm hole diameter 34 to 36 mm is required. Effective length 229mm Effective length 214mm Overhang 15mm Height adjustment range 42-55mm Needle pressure adjustment range 0g to 5g
Comes complete with accessories. The degree is good. A rare arm from Stax with an excellent slim and sophisticated design. The chewy and supple sound is attractive. Recommended for light needle pressure cartridges. Comes with a genuine shell (Shota Sasaki)
Maintenance Information: 2022.4.30 Conducting, movable confirmed
Accessories: original box, shell, manual, phono cable
Main specifications: Static balance type Total length 350 mm Effective length 240 mm Arm height 30 to 63 mm Needle pressure 0 to 3 g Compatible cartridge 2 to 16 g
Good degree! A popular SAEC tone arm with a double knife edge structure. It is an arm with excellent crafting accuracy, and of course it is still worth a first-class product today. It is a popular gem that brings out the full capabilities of cartridges. The original box is only the inner box (Shota Sasaki)
Maintenance Information: 2022.4.30 Confirmation
Accessories: Original box (outer box missing) manual overhang gauge
Main specifications: static balance type needle pressure 0 to 4 g total length 311 mm effective length 233 mm overhang 12 mm cartridge dead weight 23 g to 33.5 g (both shells, when using standard equipment weights)
The price has been reduced! 2022/4/20 sales price 79,800 yen Short arm for SPU G shell mounted on a dedicated stand. The gentle tracing ability unique to the static balance type, which is different from the dynamic balance type of the RMG system, is attractive. If the height matches, it can be installed as it is, and it is easy to use. The appearance has threads and scratches. (Kimiya Miura)
Maintenance Information: 2022.4.20 Confirmation
Accessories: Arm base
Main specifications: Static balance type Total length 300mm Running length 212mm Needle pressure range 0-10g (1g step) W140 × H218 × D240 mm
Comes with original box! It arrived for the first time in about 5 years. It is a gem with the same specifications as the 3012R but the internal wiring is silver wire. A popular long arm that can also be used with heavyweight cartridges such as SPU and FR-7. It brings out the power of heavyweight cartridges firmly. Serial 0421 (Miura Kimiya)
Maintenance information: 2022.4.14 continuity confirmed
Accessories: Instruction manual, phono cable, original box
Main Specifications: Static Balance Effective Length 307.3 mm Heavy Needle Pressure Compatible Cartridge 9.5 to 34 g Needle Pressure 0 to 5.0 g
Maintained! The sharp, sharpened followability and solid tone due to the metallic knife edge are attractive. You can enjoy the crisp cuts and the large amount of information typical of analog discs. The stoic and beautiful design similar to a precision machine is also excellent.
Maintenance information: 2022.4.22 Maintained (elastic coupling rubber × 1, base gasket × 1, bed plate grommet × 4 have been replaced due to deterioration. The main unit was disassembled and cleaned. (Inspection and adjustment of each part and operation check were performed.)
Accessories: Instruction manual, arm cable, overhang gauge, head shell
Main Specifications: Short Arm Static Balance Type Total Length 265mm Overhang 15mm Needle Pressure (When 1 Rider Weight is Attached) 1 Memory 0.25g Step/0g to Maximum 2.5g Needle Pressure ( (When 2 rider weights are installed) 1 memory 0.5 steps/0g to up to 5g cartridge own weight up to about 28g
Grace's tone arm for light hand pressure. The agile response is truly for light hand pressure. You can enjoy analog with lighter sound quality. Recommended for those who use SHURE's V15 series, etc. There is deterioration in the rubber parts (Fujisawa Yukishi)
Maintenance information: 2022.4.21 continuity confirmed
Accessories: instruction manual, arm cable, armrest
Main Specifications: Static Balance Type Total Length 320mm Running Length 237mm Overhang 15mm Needle Pressure Range 0-3g 0.25g Step
Replacement arm pipe for Audio Craft AC-3000 If you use multiple cartridges properly with a straight arm, please take this opportunity (Fujisawa Yukishi)
Maintenance information: 2022.4.21 continuity confirmed
Accessories: None
Main specifications: dead weight 32g
Short arm for dynamic balance type G shell It is an implemented model with surprisingly few arrivals. Recommended for those who want to make your SPU-G sound more guzzy. The exterior has a feeling of use of a dull tower. (Asa Tomoho)
Maintenance information: 2022.3.17 continuity confirmed
Accessories: Instruction Manual Phono Cable Armrest Arm Base Mounting Screws Source Box
Main specifications: Total length 308 mm Effective length 228 mm Effective length 212 mm Overhang 16 mm Needle pressure range 0 to 7 g
* Please note that normal shells and EMT cartridges cannot be used. Orthofan's American brand ESL arm has arrived. It is a gimbal bearing tone arm that cannot be used except for a dedicated shell. Although it is a 60s arm, the movement is smooth, and there is no spring for adjusting needle pressure. It supports both stereo and mono. The appearance was dull. (Miura Kimiya)
Maintenance information: 2022.4.20 continuity confirmed
Accessories: Instruction manual, original box, shell, armrest
Main specifications: Dynamic short arm
With AS-500E! A tone arm that corresponds to a minor upgrade model of the WE-308. The bearing part adopts a double knife edge structure to achieve high precision followability. The low distortion and good separation are also noteworthy models. The appearance has dullness and small scratches. Serial 12005 (Miura Kimiya)
Maintenance information: 2022.4.6 operation confirmed
Accessories: Phono cable, AS-500E, gauge
Main specifications: Double knife edge, static balance, universal type, effective length 240 mm, total length 329 mm, overhang 5 mm, needle pressure adjustment range 0 to 4 g, mounting hole diameter 30 mm
A lightweight tone arm for needle pressure, which is an improved model of the 3009S2. It specializes in light hand pressure, narrows down the application, and has a sharp followability that has been sharpened is attractive. You can enjoy the crisp cuts and the large amount of information typical of analog discs. The stoic and beautiful design similar to a precision machine is also excellent. Dullness is noticeable on the exterior (Hiura Katsutsugu)
Maintenance information: 2022.3.17 operation confirmed
Accessories: phono cable, instruction manual (copy)
Main specifications: Static balance type needle pressure 0 to 1.5 g Cartridge self weight 4 to 9 g
A Japanese-made FR masterpiece arm made with a high level of stainless steel and crafting precision. The clear, thick tone that does not make you feel incidental sounds is wonderful, and the breadth and ease of setting, and the solid and outstanding tracing ability in the dynamic balance type are excellent (Yoichi Murakoshi)
Maintenance information: 2022.4.1 continuity confirmed
Accessories: phono cable, instruction manual (copy)
Main Specifications: Total Length 325 mm Effective Length 245 mm Overhang 15 mm Needle Pressure Application Range 0 to 5 g Arm Height Adjustment 25-60 mm Compatible Cartridge Weight (Including Shell) 17-44 g Mounting Hole Diameter 31mm
The price has been drastically reduced. 2021/12/24 Sales price 148,000 yen. An improved long arm that refines each part of the original 3012. It is a popular model that can be used with a variety of cartridges. In addition to a glossy and smooth tone, it is a famous machine that boasts a chiseled sound quality. Serial 119305 (Mizushima Itsuro)
Maintenance information: 2022.3.28 maintenance completed (arm socket insert × 1, elastic coupling rubber × 1, bed plate grommet × 4 replacement due to deterioration, body disassembly (Checking and cleaning, inspection of each part and operation check)
Accessories: Phono cable, head shell (S-2), inside force canceller, guide pole, original box (with damage such as tear)
Main specifications: Static balance type needle pressure 0 to 5 g Cartridge weight 1.5 to 26 g
* It is cheap because IFC weights are out of stock. It is a series at the beginning of the brand's launch, and the sound quality gives the impression that the clarity of low to mid-high frequencies is also glossy. The design, which is relatively easy to handle and clean, is also attractive. The appearance is dull and dirty. Serial 1060270 (Miura Kimiya)
Maintenance information: 2022.3.23 continuity confirmed
Accessories: phono cable, subweight
Main Specifications: Statting Balanced Cartridge Weight Applicable Range 3.5 to 17 g Needle Pressure Range 0 to 3 g (0.25 g Step) Overhang 15 mm Total Length 345 mm Effective Length 237 mm
This is Mitchell's original tone arm TecnoArm, which will be in stock for the first time at Hi-Fi-do. Adopts high-quality silver litz wire. It has a special structure with holes in the arm tube body for the purpose of dispersing structural resonance and gaining effective weight. The appearance is dull. Serial 0644 (Satoshi Yonejima)
Maintenance information: 2022.3.20 continuity confirmed
Accessories: Lightweight weights
Main specifications: Silver-plated cartridge clip and phono plug Counter weight: 2 types (cartridge dead weight: for 3-6g, 6-13g) Needle pressure adjustment adjuster function: every 0.1g
Maintained! A classic model with a long arm. The features of the long arm come out firmly with a precise and delicate sound, and in addition, a very smooth and loud sound. It is a versatile arm that can handle various weights and needle pressures from lightweight to heavyweight (Fujisawa Yukishi)
Maintenance information: 2022.3.24 Maintained (armrest catch x 1, balance weight (front) part installed due to missing O-ring. Headplate grommets x 4 replaced due to deterioration Replenished the bias guide due to missing pulley in the bias guide. Main unit disassembly check and cleaning (Inspection of each part and operation check.)
Accessories: original box, arm cable, screws
Main Specifications: Long Arm Static Balance Total Length 400mm Execution Length 307.3mm Heavy Needle Pressure Compatible Cartridge 9.5 to 34 g Needle Pressure Adjustment 0-5g
SAEC's tone arm has a reputation for its mechanical design. It has a hard ruby W knife-edge construction and features a clear, contoured sound. It is an arm that firmly conveys the goodness of cartridges due to its high tracing ability. There is rust and dullness on the whole (Sasaki Shota)
Maintenance information: 2022.3.15 continuity confirmed
Accessories: phono cable
Main Specifications: Double Knife Edge Static Balance Type Total Length 329 mm Effective Length 240 mm Cartridge Usage Range 23.5g to 33.5g Needle Pressure Adjustment Range 0-4g Mounting Hole Diameter 30mm
※There is no arm cable. An FX model whose strength has been further enhanced by reviewing the material of the FR-64. The high rigidity is one of the best tone arms of each company. The tone with a strong sense of extrusion and a low center of gravity is unique to the FX model. There is overall dullness (Fujisawa Yukishi)
Maintenance information: 2022.3.12 continuity confirmed
Accessories: None
Main Specifications: Dynamic Balance Type Tone Arm Total Length 322mm Running Length 245mm Overhang 15mm Needle Pressure Range 0-3g Arm Height Adjustment 25-60mm Arm Base Hole 31mm
The disposal price has been reduced! Member discounts are not applicable. 2022/2/28 Sales price 138,000 yen overhauled! The sharp, sharpened followability and solid tone due to the metallic knife edge are attractive. You can enjoy the crisp cuts and the large amount of information typical of analog discs. The stoic and beautiful design similar to a precision machine is also excellent (Sasaki Shota)
Maintenance information: 2022.2.28 Maintained (elastic coupling rubber × 1, bed plate grommet × 4, replaced due to deterioration. The main unit was disassembled and cleaned. We inspected each part and checked the operation. (Bias guide and ladder weight (front) have been replenished due to shortage.)
Accessories: phono cable
Main Specifications: Short Arm Static Balance Type Total Length 265mm Overhang 15mm Needle Pressure (When 1 Rider Weight is Attached) 1 Memory 0.25g Step/0g to Maximum 2.5g Needle Pressure ( (When 2 rider weights are installed) 1 memory 0.5 steps/0g to up to 5g cartridge own weight up to about 28g
The disposal price has been reduced! Member discounts are not applicable. 2022/2/27 Sales price 138,000 yen Maintained! The sharp, sharpened followability and solid tone due to the metallic knife edge are attractive. You can enjoy the crisp cuts and the large amount of information typical of analog discs. The stoic and beautiful design similar to a precision machine is also excellent (Tetsuji Oikawa)
Maintenance information: 2022.2.27 Maintained (Bed plate grommet × 4 has been replaced due to deterioration. Since the arm lifter pad part and foreign matter are attached, it has been replaced. The main unit was disassembled and cleaned. (We inspected each part and checked the operation)
Accessories: phono cable
Main Specifications: Short Arm Static Balance Type Total Length 265mm Overhang 15mm Needle Pressure (When 1 Rider Weight is Attached) 1 Memory 0.25g Step/0g to Maximum 2.5g Needle Pressure ( (When 2 rider weights are installed) 1 memory 0.5 steps/0g to up to 5g cartridge own weight up to about 28g
The disposal price has been reduced! (Member discount is not applicable) 2022/2/26 sales price 138,000 yen maintained! The sharp, sharpened followability and solid tone due to the metallic knife edge are attractive. You can enjoy the crisp cuts and the large amount of information typical of analog discs. The stoic and beautiful design similar to a precision machine is also excellent. There are some scratches and scratches on the appearance. Serial 104429 (Satoshi Yonejima)
Maintenance information: 2022.2.26 Maintained (elastic coupling rubber refixed. Attaches one arm lifter pad Main unit disassembly check and cleaning Inspection of each part, check operation. (Bias weight, bias guide replenishment)
Accessories: copy of instruction manual, connection cable
Main Specifications: Short Arm Static Balance Type Total Length 265mm Overhang 15mm Needle Pressure (When 1 Rider Weight is Attached) 1 Memory 0.25g Step/0g to Maximum 2.5g Needle Pressure ( (When 2 rider weights are installed) 1 memory 0.5 steps/0g to up to 5g cartridge own weight up to about 28g
Maintained The tone arm is a minor upgrade model of the WE-308. The bearing part adopts a double knife-edge structure to achieve high-precision tracking. Less distortion and good separation are also noteworthy models (Tetsuji Oikawa)
Maintenance information: 2022.2.23 Maintained (headshell contact partial disassembly, repair of all contact pins
Resistance value from shell contact to PU cord tip pin plug, 0.5Ω in total line, continuity test normal on cartridge installation (check 1Ω addition by reciprocating) PU cord disassembly and Lch cable processing just in case (Repair, insulation treatment because it is inappropriate, hot is in contact with the case)
Accessories: Copy of instruction manual
Main specifications: Double knife edge, static balance, universal type, effective length 240 mm, total length 329 mm, overhang 5 mm, needle pressure adjustment range 0 to 4 g, mounting hole diameter 30 mm
Maintained! A classic model of a long arm. It is dense and delicate, plus it has a very smooth and cheerful way of sounding, which gives the characteristics of the long arm well. It is a versatile arm that can handle various weights and needle pressures from lightweight to heavyweight. The appearance is dull. Serial 02581R (Satoshi Yoneshima)
Maintenance Information:2022.2.26 Maintained (Disassembly check and cleaning. Inspection of each part and operation check. (Bed plate grommet installation)
Accessories: instruction manual, connection cord, template, screws
Main Specifications: Long Arm Static Balance Total Length 400 mm Running Length 307.3 mm Compatible with Heavy Needle Pressure Compatible Cartridges 9.5 to 34 g Needle Pressure Adjustment 0 to 5 g
* Currently sold goods. A representative work of DENON in its analog heyday. The strong tone of the extrusion and the smart design not seen in other manufacturers are excellent. Small scratches, dullness, and dirt can be seen on the whole appearance (Ryo Mizusaki)
Maintenance information: 2022.2.12 continuity confirmed
Accessories: phono cable
Main specifications: Static balance, dynamic damping type, total length 332mm, overhang 14mm, compatible cartridge self-weight range of 5 to 10 g
SAEC's tone arm has a reputation for mechanical design. It has a hard ruby W knife-edge construction and features a clear, contoured sound. It is an arm whose high tracing ability firmly conveys the goodness of cartridges (Itsuro Mizushima)
Maintenance info: 2022.2.7 operation confirmed
Accessories: Instruction manual, copy phono cable
Main specifications: Double knife edge, static balance type, total length 329 mm, effective length 240 mm, cartridge usage range 23.5 g to 33.5 g, needle pressure adjustment range 0 to 4 g, mounting hole diameter 30 mm
Adopts a double knife edge, a representative model of Saek. It has a reputation for clear sound and accurate sound image localization, and is still popular today. There is some dullness (Murakoshi Yoichi)
Maintenance info: 2022.2.7 operation confirmed
Accessories: Copy of instruction manual, phono cable
Main specifications: Double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g
The price has been drastically reduced. 2022/1/30 selling price 148,000 yen. Maintained! It is an arm that inherits the basic design of the famous machine 3012 and has increased versatility with all players by downsizing. It is also attractive that it is compatible with heavyweight cartridges such as SPU from lightweight cartridges due to the two-split main weight The sound quality with a clear core is still highly popular due to the sharp followability of the knife edge (Katsuji Hiura)
Maintenance Information:2022.1.26 maintenance (balance weight removal fix,
Replaces 1 O-Ring Balance Weight, 1 Armrest Catch, and 4 Bed Plate Grommets Main unit disassembly check and cleaning. (Inspection of each part and operation check.)
Accessories: phono cable
Main specifications: Static balanced type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), needle pressure variable range 0 to 5 g
The disposal price has been reduced! (Member discounts are not applicable) 2021/12/30 sales price 138,000 yen Maintained! The sharp tracking and solid timbre that has been sharpened by the metallic knife edge are attractive. You can enjoy the crisp cuts and the large amount of information that is typical of analog discs. The stoic and beautiful design like a precision machine is also excellent. * Shield case is not included. The appearance is dull. Serial 21824 (Satoshi Yonejima)
Maintenance Information: 2021.12.30 Maintained (Replaced due to defective arm socket contacts. Coupling rubber x 1, base gasket x 1, lifter pad x 1. Replacement due to deterioration. Main unit disassembly check and cleaning. (Inspection adjustment and operation check of each part)
Accessories: phono cable
Main Specifications: Short Arm Static Balance Type Total Length 265mm Overhang 15mm Needle Pressure (When 1 Rider Weight is Installed) 1 Memory 0.25g Step/0g ~ Max 2.5g Needle Pressure ( (When 2 rider weights are installed) 1 memory 0.5 step/0g up to 5g cartridge own weight up to 28g
The disposal price has been reduced! (Members are not eligible for discount) 2022/1/16 selling price 350,000 yen SAEC's long arm full of functional beauty reminiscent of precision machinery! It is designed to always exhibit the best performance for studio use, and uses a special light alloy created by French Aviation Technology for the arm pipe. The world of delicate and precise sounds makes us feel the height of technology at that time. The appearance has a feeling of use such as Kusumi. * The arm base is not genuine. Serial 250004 (Asasachi method)
Maintenance information: 2022.1.16 continuity confirmed
Accessories: Instruction Manual Copy Phono Cable Shell Armrest
Main Specifications: Static Balance Type Total Length 392mm Overhang 9mm Arm Base Hole Diameter 30mm (Actual Measurement) Needle Pressure Range 0 to 4g Compatible Cartridge Weight 5 to 15 g
The price has been reduced. 2022/1/21 Sales price 178,000 yen Maintained! With slide base SB-2! Long arm for SPU-G shell The beauty of the form unique to the long arm is also attractive. A dynamic balance type that brings out the appeal of SPU to the fullest. You can enjoy a deep, dense sound. Since it comes with a slide base, it can also be used for A-shell types. There are small scratches on the arm pipe. (Yosuke Kojima)
Maintenance information: 2022.1.21 Maintained (main weight part bearing replacement counter rubber weight additional internal wiring replacement, assembly adjustment output connector fixed part deformation correction zero balance reconciliations
(Operation check)
Accessories: Connection cable, armrest, slide base, original box (only cushioning material)
Main specifications: Total length 408mm Effective length 320mm Effective length 309mm Overhang 11mm Needle pressure range 0-7g
SAEC's tone arm has a reputation for mechanical design. It has a hard ruby W knife-edge construction and features a clear, contoured sound. It is an arm whose high tracing ability firmly conveys the goodness of cartridges (Yoichi Murakoshi)
Maintenance information: 2022.1.14 continuity confirmed
Accessories: Instruction manual (copy), phono cable
Main specifications: Double knife edge, static balance type, total length 329 mm, effective length 240 mm, cartridge usage range 23.5 g to 33.5 g, needle pressure adjustment range 0 to 4 g, mounting hole diameter 30 mm
The disposal price has been reduced! (Member discounts are not applicable) 2021/12/30 sales price 138,000 yen has been overhauled! The sharp, sharpened followability and solid timbre due to the metallic knife edge are attractive. You can enjoy the crisp cuts and the large amount of information that is typical of analog discs. The stoic and beautiful design like a precision machine is also excellent. The appearance of the main body has slight scratches, dullness, etc. Serial 38281 (Satoshi Yonejima)
Maintenance Information: 2021.12.30 Maintained (elastic coupling rubber x 1 replacement. Main unit disassembly check and cleaning. (Main unit inspection, operation check)
Accessories: phono cable
Main Specifications: Short Arm Static Balance Type Total Length 265mm Overhang 15mm Needle Pressure (When 1 Rider Weight is Installed) 1 Memory 0.25g Step/0g ~ Max 2.5g Needle Pressure ( (When 2 rider weights are installed) 1 memory 0.5 step/0g up to 5g cartridge own weight up to 28g
The disposal price has been reduced! (Member discounts are not applicable) 2021/12/5 selling price 59,800 yen Audio Technica's universal tone arm for broadcasting stations. The lead wire inside the arm is a Teflon-coated silver wire. It is a masterpiece arm that was later released as a limited edition of reprints. The appearance is dull (Satoshi Yonejima)
Maintenance Information: 2021.12.5 Maintained (Inside Force Canceller Weight Thread Created)
Accessories: original box, instruction manual, template, armrest, screws
Main Specifications: Static Balanced Type Running Length 257mm Compatible Cartridge 13.5~33g (Including Shell) Needle Pressure Range 0-3g
The disposal price has been reduced! (Member discount is not applicable) 2021/12/9 sales price 138,000 yen has been overhauled! The sharp, sharpened followability and solid timbre due to the metallic knife edge are attractive. You can enjoy the crisp cuts and the large amount of information that is typical of analog discs. The stoic and beautiful design like a precision machine is also excellent. The appearance has a feeling of use such as dullness and dirt. * Inside Force Canceller is out of stock. Serial 51110 (Nobuyuki Takahashi)
Maintenance Information: 2021.12.9 Maintained (ELASTEC COUPLING RUBBER, BET PLATE GROMMET DESIGN REPLACE, BASE CLAMP BOLT, BASE CLAMP NUT REPLACE Check, clean. (Operation check)
Accessories: Connection cord mounting screws (general-purpose products) * Inside Force Canceller shortage
Main Specifications: Short Arm Static Balance Type Total Length 265mm Overhang 15mm Needle Pressure (When 1 Rider Weight is Installed) 1 Memory 0.25g Step/0g ~ Max 2.5g Needle Pressure ( (When 2 rider weights are installed) 1 memory 0.5 step/0g up to 5g cartridge own weight up to 28g
An improved long arm that refined each part of the original 3012. It is a popular model that can be used with various cartridges. In addition to the glossy and smooth tone, it is a famous machine that boasts a deep chiseled sound quality. The appearance has small scratches and rust floats on the knife edge part. Serial 110909 (Honda Maki)
Maintenance information: 2021.12.24 continuity confirmed
Accessories: connection cord
Main specifications: Static balance type needle pressure 0 to 5 g Cartridge weight 1.5 to 26 g
Overhauled! The sharp, sharpened followability and solid timbre due to the metallic knife edge are attractive. You can enjoy the crisp cuts and the large amount of information that is typical of analog discs. The stoic and beautiful design like a precision machine is also excellent. The appearance of the main body has slight scratches, etc., but it is beautiful for aging. The cable has a feeling of use such as dullness and dirt. Serial 59230 (Nobuyuki Takahashi)
Maintenance Information: 2021.12.9 Maintained (ELASTEC COUPLING RUBBER, BET PLATE GROMMET AGATION REPLACE, BODY DISTURE CHECK, CLEAN (Operation check)
Accessories: Connection cord mounting screw hex wrench
Main Specifications: Short Arm Static Balance Type Total Length 265mm Overhang 15mm Needle Pressure (When 1 Rider Weight is Installed) 1 Memory 0.25g Step/0g ~ Max 2.5g Needle Pressure ( (When 2 rider weights are installed) 1 memory 0.5 step/0g up to 5g cartridge own weight up to 28g
Maintenance has been completed! Short arm for SPU G shell The gentle tracing ability unique to the static balance type, which is also different from the dynamic balance type of the RMG system, is attractive. There is dullness corresponding to the age (Yoichi Murakoshi)
Maintenance information: 2021.12.4 Maintenance (left and right vertical bearing pivot disassembly, assembly and correction. Internal wiring material replacement. Inspection of each part, etc. (Operation, continuity test OK.)
Accessories: Armrest
Main specifications: Static balanced type Total length 300mm Running length 212mm Needle pressure range 0-10g (1g step)
With original box Maintained A Japan-made FR masterpiece arm made of high level of stainless steel and machining precision. The clear and thick tone that does not make you feel the incidental sound is wonderful, the breadth and ease of setting, and the solid and outstanding tracing ability in the dynamic balance type are excellent. The appearance is dull. Dedicated shell, phono cable not included (Shota Sasaki)
Maintenance information: 2021.12.7 Maintained (disassembly of needle pressure adjustment mechanism, grease up. Disassembly of arm lifters, grease up. (Needle pressure confirmed and other operation confirmed.)
Accessories: original box, explanation, overhang gauge
Main specifications: Total length 325 mm Effective length 245mm Overhang 15mm Needle pressure application range 0 ~ 5g Arm height adjustment 25 ~ 60 mm Compatible cartridge weight (including shell) 17 ~ 44 g Mounting hole diameter 31mm
We have drastically reduced the price. 2021/11/28 Selling price 178,000 yen Genuine arm cable 8N-TSW1000 with SPU-G exclusive long type tone arm. It is a reprinted version of the Imp Louvre model. The cohesive design is proof that captivated many audiophiles The lid of the bookcase is damaged (Yosuke Kojima)
Accessories: Instruction manual, original box, phono cable, overhang gauge
Main specifications: Total length 408mm Effective length 320mm Effective length 309mm Overhang 11mm Needle pressure range 0-7g