Technics premium tonearm Boron is used in the arm pipe, and you can enjoy accurate and straight sound with a structure that completely eliminates unnecessary resonance. Fairly good (Daiki Goto)
Maintenance information: 2023.6.8 storefront operation confirmed (continuity test, pivot, moving part, sensitivity test OK)
Accessories: instruction manual, arm cable
Main specifications: static balance type, total length: 350 mm, execution length: 250 mm; suitable weight: 14.5 to 19.5 g; needle pressure: 0 to 3 g
The price has been reduced! 2022/12/25 sales price 79,800 yen maintenance completed! A model specialized for light needle pressure on the 3009S2 and narrowed down applications. The sharp followability that has been sharpened is attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. The exterior has a feeling of dull use etc. (Tomonori Asae)
Maintenance information: 2022.12.25 maintenance completed (main unit disassembly check and cleaning phono cable change operation check for each part)
Accessories: phono cable, mounting screws, manual copy box
Main specifications: static balance type needle pressure 0 to 1.5 g, cartridge own weight 4 to 9 g
Disposal prices have been reduced! (Member discounts do not apply) 2023/5/5 sales price 128,000 yen ※ The hole in the arm mount has been widened by processing. Ortophone AS series long type arm. A cross lifting sytem that supports the weight of the entire movable part of the arm with pin points from up, down, left, and right is used. Frictional resistance on moving parts is minimized to the extreme, and extremely smooth arm movement is achieved. The overall condition of the exterior has deteriorated due to wear over time, such as scratches, dull stains, etc. *Optional weight type D (sold separately) is required when using SPU (Tomonori Asae)
Maintenance Information: 2023.5.5 Confirmation Confirmed
Accessories: original box instructions, overhang gauge phono cable
Main specifications: static balance type long arm effective length 326 mm effective length 311 mm height adjustment range 35 to 55 mm compatible cartridge weight 18 g to 28 g (including shell) own weight 545 g
Maintained! A model specialized for light needle pressure on the 3009S2 and narrowed down applications. The sharp followability that has been sharpened is attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. The exterior has a feeling of dull use etc. (Tomonori Asae)
Maintenance information: 2023.5.4 Maintained (The main unit was disassembled and cleaned. Rider weight fixing spring x 1 attachment. Base grommets x 4 were replaced due to deterioration. (Adjust each part and check operation)
Accessories: phono cable, mounting screws, copy of instruction manual
Main specifications: static balance type needle pressure 0 to 1.5 g, cartridge own weight 4 to 9 g
The price has been reduced! 2023/5/5 sales price 48,000 yen*Since it is a modified product, it is currently sold (the terminal has been changed to 5 pins). A rare Sony long arm has arrived. It is a gimbal support system using ultra-precision micro bearings, which is comparable to chronometer-grade watch technology, and achieves sharp sensitivity with low frictional resistance. The exterior has a feeling of use such as dullness and small scratches (Tomonori Asae)
Maintenance Information: 2023.5.5 Confirmation Confirmed
Accessories: ※Phono cable is missing
Main specifications: static balance type long arm, effective length 286 mm, cartridge weight used, 3.5 g to 20 g*auxiliary weight is required for 14 g or more
The price has been reduced. 2023/5/18 sales price 198,000 yen The initial main weight split type has been revived with genuine maintenance by Rizaye! It is an extremely popular model that can be used with a variety of cartridges. In addition to the glossy, smooth tone with a metal knife edge, it is a famous machine that boasts deep carving sound quality (Murakoshi Yoichi)
Maintenance information: 2023.5.17 maintenance (main body disassembly check and cleaning, bed plate grommet x 4 replacement, inspection and adjustment of each part and operation check.)
Create an upper output cable to use as a connector.
Accessories: phono cable, instruction manual (copy)
Main specifications: static balance type needle pressure 0 to 5 g cartridge weight 1.5 to 26 g
*Currently on sale. A commercial tone arm used by broadcasting stations, etc. This is an authentic arm with all contact parts plated with gold, including the contact part of the 4P connector. This is a non-genuine phono cable (Sasaki Shota)
Maintenance Information: 2023.5.11 Confirmation Confirmed
Accessories: phono cable (non-genuine)
Main specifications: static balance type, total length: 348 mm, effective length: 244 mm, needle pressure range: 0 to 3 g, height adjustment range: 35 mm to 70 mm, compatible cartridge weight: 4 to 15 g
A rare straight arm made of ADC. Compatible with cartridges up to 10g of their own weight. There are also many accessories (Murakoshi Yoichi)
Maintenance Information: 2023.5.10 Confirmation Confirmed
Accessories: original box, instruction manual, phono cable, arm base, 3 types of weights, screws, tools, mounting template
Main specifications: total length 313 mm, execution length 237 mm, needle pressure range 0 to 1.5 g, cartridge's own weight 4 to 10 g
Comes with original box and shell It is a tone arm that pursues a reduction in the effective mass of the tip of the arm, and by reducing weight, the needle is prevented from touching violently due to the effects of record board sharks, etc. It is equipped with a needle pressure adjustment mechanism with a 0.1 g step scale that is easy to read directly. Marks that appear to be the original arm base paint are stuck to the mounting part (Sasaki Shota)
Maintenance Information: 2023.5.11 Confirmation Confirmed
Accessories: shell, original box, phono cable, instructions
Main specifications: static balance type, effective length: 244 mm, needle pressure range: 0 to 2 g
6 month warranty. This is an oil dump type tone arm with high traceability. Simple, sophisticated design. The low frequencies are stable and sound clear.
Maintenance Information: 2023.5.11 Confirmation Confirmed
Accessories: phono cable
Main specifications: one-point support oil dump system total length 323 mm execution length 237 mm overhang 15 mm tracking error needle pressure range 0 to 3 g (0.1 step) cartridge own weight 3 to 17 g
※The lifter is broken. Also, since the lifter height adjustment screw is bent and cannot be firmly fixed, it is inexpensive. This is a straight arm type popular with Audiocraft. This model has been improved on the arm base of the AC-3000/4000 series. The oil dump type has excellent tracing power, and the precise design makes settings easy. At the end of the day, the world of analog discs seems to expand infinitely. Phono Cable's ground wire is out of stock (Fujisawa Koshi)
Maintenance Information: 2023.5.4 Confirmation Confirmed
Accessories: phono cable (ground missing)
Main specifications: static balance system, oil dump type, total length: 333 mm, effective length: 237 mm, needle pressure range: 0 to 5 g (0.25 g step), cartridge's own weight: 14 to 33 g
*Phono cable is not included. Technics high sensitivity tone arm. It's a domestically produced tone arm that incorporates all of the technology from that time and combines delicate movement and strength. There is overall dullness (Kojima Yosuke)
Maintenance information: 2023.4.29 operation confirmed
Accessories: instruction manual, original box, tools
Main specifications: titanium pipe arm, variable braking dynamic damping system, universal tone arm, effective length 250 mm, overhang 15 mm, compatible cartridge+shell weight 14.5 to 19.5 g
A tone arm corresponding to the minor upgrade model of the WE-308. The bearing part uses a double knife edge structure to achieve highly accurate traceability. The low distortion and good separation are also noteworthy models. The exterior has dullness, small scratches, and dirt adhering to the cable (Murakoshi Yoichi)
Maintenance Information: 2023.4.23 Confirmation Confirmed
Accessories: instruction manual (copy), phono cable, installation tool
Main specifications: double knife edge static balance universal type effective length 240 mm total length 329 mm overhang 5 mm needle pressure adjustment range 0 to 4 g mounting hole diameter 30 mm
This is Ortophone's initial arm, an A-shell exclusive arm, which is the first to arrive at Hi-Fido. Since the cable is untreated, processing is necessary. The exterior is dull and oxidized. Also, the included A-shell chip is missing (Tamura Eiji)
Maintenance Information: 2023.4.20 Confirmation Confirmed
Accessories: armrest
The price has been drastically reduced. 2023/2/23 sales price 348,000 yen maintenance completed. Comes with original box A 12-inch long arm that inherits the design philosophy of SERIES V. Tapered pipe arms Sealed bearings are used for vertical bearings. The arm base is split into 2 parts, the player base attachment part and the pillar fastening part are separated, and rack gear is cut into the coupling part, and overhang adjustment is possible. The headshell is detachable, making it easier to replace cartridges. It's in good condition (Oikawa Tetsuji)
Maintenance information: 2023.2.23 Maintained (I reconnected the broken part of the ground wire, covered it with a protective tube, and cured it. Also, a large amount of enamel wire was initially wrapped around it, but all of it was removed and restored. Also, the electrical conductivity and electrical insulation between each terminal were measured, and it was confirmed that there were no problems.)
Accessories: phono cable, original box
Main specifications: static balance type total length 381 mm effective length 308.2 mm overhang 12.6 mm compatible cartridge weight 5 to 14 g needle pressure range ~ 3 g
Comes with an optional elevation base B-60 (¥38,000)! An FR masterpiece arm made in Japan, made with a high level of stainless steel and machining accuracy. The clear, thick tone that doesn't make you feel any incidental sounds is amazing, and the breadth and ease of settings, and the firm and outstanding tracing ability in the dynamic balance type are excellent. The exterior has stains, stains, and a feeling of use over time (Sasaki Shota)
Maintenance information: 2023.4.14 operation confirmed
Accessories: phono cable (non-genuine), elevation base (B-60)
Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm
Dynavectorial's unique mass-separated tone arm. It is an arm that has high tracking performance on vinyl records, and the sense of spaciousness of the sound field and good low frequency resolution enrich the expression of musical expression. *There is no headshell phono cable. The exterior is dull. Serial 100679 (Kimiya Miura)
Maintenance information: 2023.4.4 operation confirmed
Accessories: instruction manual, original box, subweight x 1 type
Main specifications: Static balance type, total length 309 mm, execution length 241 mm, overhang 15 mm, cartridge's own weight 15 to 30 g (including shell)
It is an arm that inherits the basic design of the 3012 and has been downsized to enhance versatility with all players. It is also attractive that the 2-split main weight is compatible with lightweight cartridges to heavyweight cartridges such as SPUs. Due to the sharp traceability of the knife edge, the clear and crisp sound quality is still highly popular today. The exterior is dull. Serial 09750R (Asae Tomonori)
Maintenance information: 2023.4.8 Confirmation confirmed
Accessories: connection cord
Main specifications: static balance type effective length 237 mm cartridge mounting weight range 9.5 to 34 g (including shell) variable needle pressure range 0 to 5 g
※Lateral weight is cheap for missing parts. Currently, the arm pipe is MC-AL. The AC-4000MC, equipped with an arm pipe dedicated to SPU-A, has arrived after a long absence. Weights are also weight weights. This is a masterpiece arm with one-point support, static balance, and oil dump system. The exterior is dull and dirty. (TAMURA Eiji)
Maintenance information: 2023.4.6 sound output confirmed
Accessories: copy of instruction manual, subweight, phono cable
Main specifications: static balance type, total length: 333 mm, effective length: 237 mm, overhang, 15 mm, needle pressure range: 0 to 3 g (0.25 g step), compatible cartridge, own weight: 3 to 17 g
Thoroughly careful manufacturer maintenance such as internal wiring replacement, sensitivity adjustment, lubrication, etc. has been completed! A popular SAEC tone arm with a double knife edge structure. It's an arm with excellent crafting accuracy, and of course it's worth a first-class product even now. It's a popular gem that brings out the full power of the cartridge. The phono cable comes with the company's CX-5006 TYPEB (for low impedance). There are some scratches, small scratches, and dullness on the metal part (Kobayashi Hitoshi)
Maintenance information: 2023.4.3 manufacturer maintenance (disassembly, internal wiring material replacement, stopper repair, assembly, inspection of various locations, sensitivity adjustment/maintenance/lubrication, operation confirmation/sound output confirmation.)
Accessories: phono cable, instruction manual (copy)
Main specifications: static balance type needle pressure 0 to 4 g total length 311 mm effective length 233 mm overhang 12 mm cartridge own weight 23 g to 33.5 g (when using standard equipment weights for both shells)
SAEC's tone arm has a reputation for its mechanical design. It has a solid ruby W knife edge structure and features a clear, well-defined sound. It is an arm whose high tracing capacity clearly conveys the merits of the cartridge. There are parts of the exterior that are dull and dirty. *Phono cable is not included. Serial 27272 (Kimiya Miura)
Maintenance information: 2023.3.29 operation confirmed
Accessories: instruction manual, original box
Main specifications: double knife edge static balance type total length 329 mm effective length 240 mm cartridge usage range 23.5 g to 33.5 g needle pressure adjustment range 0 to 4 g mounting hole diameter 30 mm
Comes with AS-500E! A popular SAEC tone arm with a double knife edge structure. It's an arm with excellent crafting accuracy, and of course it's worth a first-class product even now. It's a popular gem that brings out all the power of cartridges (Daiki Goto)
Maintenance information: 2023.3.25 operation confirmed
Accessories: connecting cable, inside force canceller, weight
Main specifications: static balance type needle pressure 0 to 4 g total length 311 mm effective length 233 mm overhang 12 mm cartridge own weight 23 g to 33.5 g (when using standard equipment weights for both shells)
The price has been reduced. 2023/2/19 sales price 34,800 yen*Currently sold. Standard model for light needle pressure by Fidelity-Research. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price. There is dullness and small scratches on the exterior (Kobayashi Hitoshi)
Maintenance information:2023.2.18 sound output confirmed
Accessories: instruction manual (copy)
Main specifications: static balanced short arm, effective length 245 mm, needle pressure range 0 to 3 g
Maintained. A classic model with long arms. It is precise and delicate, and in addition, it makes a very smooth and loud sound that clearly shows the characteristics of long arms. A versatile arm that can handle a variety of weights and needle pressures, from lightweight to heavyweight (Oikawa Tetsuji)
Maintenance information: 2023.3.19 Maintained (The main unit was disassembled and cleaned. The balance weight front O-ring and base gasket have been replaced due to deterioration. The slide base has been replaced by 1. (Each part was inspected, adjusted, and checked for operation)
Accessories: phono cable
Main specifications: Long arm static balance, total length: 400 mm, execution length: 307.3 mm, heavy needle pressure compatible, compatible cartridge 9.5 to 34 g, needle pressure adjustment: 0 to 5 g
Extremely beautiful. Probably unused! It is fully equipped with accessories. Limited edition model commemorating the 10th anniversary of Ortophone Japan's founding. The way it shines in gold is exactly the right style for an anniversary. Each part is 24 carat pure gold plated, and the connector contacts are rhodium-plated. The internal wiring has been changed to 6N silver, and the output cord is also attached to 6N silver (Sasaki Shota)
Accessories: original box, tools, phono cable
Main specifications: 0-7g needle pressure for long arm dynamic balance A shell
※The phono cable is out of stock, so it's cheap. Audio-Technica statically balanced tone arm. A popular model that was designed for broadcasters and was highly trusted by professionals. The exterior has a feeling of use such as dullness and scratches (Tomonori Asae)
Maintenance Information: 2023.3.12 Confirmation Confirmed
Main specifications: total length 324 mm, execution length 254 mm, overhang, 15 mm, needle pressure range 0 to 3.0 g, 0.5 g, step cartridge, own weight 8 to 28 g
Lots of accessories! This is Audiocraft's popular straight arm type that has arrived for the first time in a long time. This model has been improved on the arm base of the AC-3000/4000 series. The oil dump type has excellent tracing power, and the precise design makes settings easy. At the end of the day, the world of analog discs seems to expand infinitely. There is an abrasion on the bottom of the axle bolt. Serial 33223 (Murakoshi Yoichi)
Maintenance Information:2023.3.14 Confirmation confirmed
Accessories: instruction manual, arm cable, 3 main weights, 2 subweights
Main specifications: static balance system, oil dump type, total length: 333 mm, effective length: 237 mm, needle pressure range: 0 to 5 g (0.25 g step), cartridge's own weight: 14 to 33 g
*The wiring is still exposed. Orthophone short arm. The gentle tracing ability unique to the static balance type, which is different from the dynamic balance type of the RMG system, is attractive. If the height is right, it can be installed as is, making it easy to use. There are scratches and scratches on the exterior (Murakoshi Yoichi)
Maintenance information:2023.3.11 sound output confirmed
Accessories: armrest
Main specifications: static balance type, total length 300 mm, execution length, 212 mm, needle pressure range 0 to 10 g (1 g step)
Disposal prices have been reduced! (Member discounts do not apply) 2022/7/24 sales price 59,800 yen DECCA MARK 1, 2, 3 cartridge exclusive tone arm. Simple structure using straight pipes. Since the needle pressure is on a dedicated arm, it is preset and set to an appropriate value. It is designed to maintain optimal conditions for the company's heads. There are small scratches and dullness on the exterior. *Please note that the cable ends will be untreated. (Miura Kimiya)
Maintenance Information: 2022.7.24 Confirmation Confirmed
Accessories: instruction manual, original box
Main specifications: static balance type, total length 303 mm, execution length 225 mm
The price has been reduced. 2022/9/3 sales price 49800 yen ※ armrests are missing. Decca's one-point static balance tone arm. We were able to confirm the continuity, but the details are unknown and we are currently selling it. Originally, a level is attached to the top of the shaft, but this model is attached to the headshell part. The arm pipe is not fixed and floats up when the pipe is lifted. According to its original specifications, it can also be used with cartridges other than those made by Decca. There is plating peeling on the weight (Murakoshi Yoichi)
Accessories: none
Main specifications: static balance, total length: 30cm, arm mounting holes: 28cm
Disposal prices have been reduced! (Member discounts do not apply) 2022/9/12 sales price 59,800 yen DECCA MARK 1, 2, 3 cartridge exclusive tone arm. Simple structure using straight pipes. Since the needle pressure is on a dedicated arm, it is preset and set to an appropriate value. It is designed to maintain optimal conditions for the company's heads. There are stains and scratches on the exterior. Please note that processing is required because the ends are untreated. (Miura Kimiya)
Maintenance Information: 2022.9.12 Confirmation Confirmed
Accessories: instruction manual (English), armrest, arm lifter
Main specifications: static balance type, total length 303 mm, execution length 225 mm
*Currently on sale. ※Subweights are missing. This is the first series when the brand was launched, and the sound quality gives the impression that the clarity and luster of the low to mid to high range sounds are. The clean design, which is relatively easy to handle, is also attractive. There is a slight haze (Fujisawa Yukishi)
Maintenance Information: 2023.2.23 Confirmation Confirmed
Accessories: phono cable
Main specifications: stuttering balance cartridge weight adaptation range 3.5 to 17 g needle pressure range 0 to 3 g (0.25 g step) overhang 15 mm total length 345 mm effective length 237 mm
The price has been reduced! 2023/2/4 sales price 12,800 yen*It's cheap because it doesn't have fingers and is in poor condition. The arm pipe for AC-3000 seems to be equivalent to the MC-S, but the details are unknown. The exterior has a feeling of wear over time, such as paint being bald or scratched (Asae Tomonori)
Maintenance information: 2023.2.4 Confirmation confirmed
Accessories: none
Main specifications: total length 221 mm (actual measurement)
A classic model with long arms. It is precise and delicate, and in addition, it makes a very smooth and loud sound that clearly shows the characteristics of long arms. A versatile arm that can handle a variety of weights and needle pressures, from lightweight to heavyweight (Kobayashi Hitoshi)
Maintenance Information:2023.2.11 Confirmation confirmed
Accessories: instruction manual, original box, connection cable
Main specifications: Long arm static balance, total length: 400 mm, execution length: 307.3 mm, heavy needle pressure compatible, compatible cartridge 9.5 to 34 g, needle pressure adjustment: 0 to 5 g
A rare Stax arm where you can feel the high level of Japanese lathe technology with sight and touch. The chewy, supple sound is attractive. Recommended for light needle pressure cartridges. The exterior is dull and dirty (Tamura Eiji)
Maintenance Information: 2023.2.5 Confirmation Confirmed
Accessories: original box, connection cable, instruction manual, armrest
Main specifications: static balance type total length 350 mm effective length 240 mm arm height 30 to 63 mm needle pressure 0 to 3 g compatible cartridge 2 to 16 g
Grace's G-940 arrived after a long absence! This is an oil dump type tone arm with high traceability. Simple, sophisticated design. The low frequencies are stable and sound clear. The exterior is dull and dirty (Tamura Eiji)
Maintenance Information: 2023.2.5 Confirmation Confirmed
Accessories: original box, connection cable, armrest
Main specifications: one-point support oil dump system total length 323 mm execution length 237 mm overhang 15 mm tracking error needle pressure range 0 to 3 g (0.1 step) cartridge own weight 3 to 17 g
Weight adapter included! This is an oil dump type tone arm with high traceability. It has a simple design, and the low frequencies are stable and resonates clearly. The exterior is dull and rusty (Tamura Eiji)
Maintenance Information: 2023.2.5 Confirmation Confirmed
Accessories: original box, connection cable, armrest, instruction manual, weight adapter
Main specifications: Static balance type oil dump type, total length 371 mm, execution length 285 mm, overhang 15 mm, needle pressure range 0 to 4 g, cartridge own weight 3 to 17 g (15 to 42 g using an adapter)
Disposal prices have been reduced! (Member discounts do not apply) 2023/1/19 sales price 248,000 yen ※ Since the socket and arm pipe have been replaced with later ones, it is inexpensive. A very rare 3009 prototype has arrived. It is an arm manufactured by founder Eikman for Ortofon SPU. IFC weights are not originally included. The EMT cartridge cannot be attached because the socket has been replaced with a later one. *Solder treatment is required for ground wire. (TAMURA Eiji)
Maintenance information: 2023.1.4 Maintained (balance coupling rubber replacement. The main unit was disassembled and cleaned. (Inspection and adjustment of each part)
Accessories: connection cable
The price has been drastically reduced. 2022/12/1 sales price 89,800 yen*Only the S-shaped arm is missing, lateral weights are missing, and there is a lot of overall dullness, so it's cheap. Statically balanced oil dump tone arm. There is no impression of being tall, which is common with arms in recent years, and they play well-balanced music in the mid to low frequencies with a sense of stability. Dullness is noticeable overall (Oikawa Tetsuji)
Maintenance Information: 2022.12.1 Confirmation Confirmed
Accessories: phono cable, weight
Main specifications: total length: 333mm effective length: 237mm overhang: 15mm arm base mounting hole: diameter 40mm cartridge own weight 14-33 g (including shell)
※The lifting and lowering of the arm lifter only moves slightly, but this is the current situation. SAEC's tone arm has a reputation for its mechanical design. It has a solid ruby W knife edge structure and features a clear, well-defined sound. It is an arm whose high tracing capacity clearly conveys the merits of the cartridge. There is a slight curve in the canceller receiver (Hiura Katsutsugu)
Maintenance Information:2023.1.2 Confirmation confirmed
Accessories: connection cable, instruction manual (copy)
Main specifications: double knife edge static balance type total length 329 mm effective length 240 mm cartridge usage range 23.5 g to 33.5 g needle pressure adjustment range 0 to 4 g mounting hole diameter 30 mm
The very rare early 3009 arm has arrived! It is an arm manufactured by founder Eikman for Ortophone SPUs, and it is compatible with both SPU-A and G types with a slide base. IFC weights are not originally included. *Solder treatment is required for ground wire. (TAMURA Eiji)
Maintenance information: 2023.1.4 Maintained (replaced due to deterioration of balance coupling rubber. The main unit was disassembled and cleaned. (Inspection and adjustment of each part)
Accessories: connection cable
Disposal prices have been reduced. Member discounts do not apply. 2022/12/5 sales price 138,000 yen with original box! A current arm that has arrived for the first time. Although it is a standard grade, stainless steel material is used for the arm pipe part, and the arm shaft uses full-fledged radial bearings, and the specs that surpass the price are attractive. The simple yet fully handmade, and beautiful design is also great. Good condition with no noticeable scratches (Sasaki Shota)
Maintenance information: 2022.12.5 operation confirmed
Accessories: manual, original box, phono cable
Main specifications: static balance type effective length 254 mm installation distance 239 mm total length 282 mm overhang 15 mm needle pressure adjustment range (including headshell) 11-26 g
The price has been reduced. 2022/12/7 sales price 17,000 yen. * Currently sold products and phono cables are out of stock, so they are inexpensive. A masterpiece of DENON during the heyday of analog. The strong extrusion tone and smart design not seen in other manufacturers are excellent. The exterior is dull. Also, there is an adhesive repair mark on the root of the armrest. (Murakoshi Yoichi)
Maintenance information: 2022.11.30 sound output confirmed
Accessories: none
Main specifications: static balance dynamic damping type total length 332 mm overhang 14 mm compatible cartridge weight range 5 to 10 g
This lightweight needle pressure tone arm is an improved version of the 3009S2. It specializes in light needle pressure, narrows down applications, and has been sharpened, and its sharp followability is attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent (Sasaki Shota)
Maintenance information: 2022.11.28 Maintenance completed (Main unit disassembly check and cleaning were carried out. (Operation of each part was checked)
Accessories: phono cable
Main specifications: static balance type needle pressure 0 to 1.5 g cartridge self weight 4 to 9 g
Disposal prices have been reduced! (Member discounts do not apply) 2022/2/25 Sales price 89,800 yen ※ IFC weights are out of stock, so it's cheap. A rare EMT short arm. The abundant amount of information unique to an arm with accurate tracing ability is attractive. *This is not a universal tone arm. Please note that the terminals are different. The exterior is dark and has small scratches (Satoshi Yonejima)
Maintenance information: 2022.2.25 operation confirmed
Accessories: connection cord
Main specifications: Total length 293 mm, effective length 230 mm, needle pressure range 0 to 5 g
Maintained! An improved long arm with each part of the original 3012 refined. It is a popular model that can be used with a variety of cartridges. In addition to its glossy, smooth tone, this famous machine boasts deep, chiseled sound quality. Appearance, dullness, and small scratches (Kobayashi Hitoshi)
Maintenance information: 2022.11.16 Maintenance completed (elastic coupling rubber replacement, main body disassembly cleaning and operation confirmation)
Accessories: copy of instruction manual, phono cable
Main specifications: Static balanced needle pressure 0 to 5 g cartridge weight 1.5 to 26 g
Comes with optional weights. Tone arm from the phantom brand “Koetsu”. It is a high-sensitivity non-resonant tone arm that employs a unique new mechanism for support. The exterior is dull and dirty. Serial 1132 (Satoshi Yonejima)
Maintenance Information: 2022.11.11 Confirmation Confirmed
Accessories: main weight, optional weight, connection cord