This is a particle audio rack from Wakatsuki Seisakusho. Dark brown with a subdued wood grain finish. Rattling is prevented by locking the shelves with a screwdriver. The exterior has bumps and peeling marks (Kimiya Miura)
Accessories: no accessories
Main specifications: W1197 x D605 x H535 mm 60 kg Effective inner dimensions W524 x D527 x H400 x 2 rows shelf board thickness 24 mm (can be moved with 30 mm pitch) Effective top plate depth 585 mm top plate load capacity 100 kg shelf board load capacity 30 kg
with spikes. As you can see, it looks like target audio. The size design is ideal for small amplifiers, etc. The exterior has line marks, stains, and oxidation (Tamura Eiji)
Accessories: none
Main specifications: W505 x H125 (including spikes) x D395 mm
England, which is said to have good sound loss, is a simple rack for target audio. The frame is made of metal and the board is wood. There is a big scratch on the shelf board (Fujisawa Yukishi)
Accessories: none
Main specifications: plate spacing: approx. 340 mm, W510 x H500 x D410 mm (actual measurement), weight 7.9 kg
The price has been reduced. 2022/12/9 sales price 49,800 yen TAOC 4-tier rack. Comes with casters. The vibration damping performance of the shelves was greatly improved with a special coating containing metal powder. The struts will be 150, 150 and 150 mm. There is a feeling of use such as scratches and repair marks on the top plate (Itsuro Mizushima)
Accessories: none
Main specifications: load capacity 100 kg (1 stage) W600 x H635 x D520 mm 22.2 kg
5 tier rack of unknown manufacturer. It has a shelf division structure like TAOC's SS-5, but it's light and simple. The space between shelves cannot be changed, and there are no spikes on the legs. The height between the shelves is 220, 210, 210 and 210 mm from below. There is a lot of dullness and dirt all over (Murakoshi Yoichi)
Accessories: none
Main specifications: shelf size without frame W495 x 410 mm W597 x H1030 x D450 mm
* It is inexpensive because the stack dowel is missing and there are some modifications on the back. ADK STC series rack units. There are no dowels for stacking, but stacking itself is possible. The exterior has line scratches and dullness (Tamura Eiji)
Accessories: no accessories
Main specifications: load capacity 100 kg Assembly dimensions W574 x H205 x D500 mm 11 kg
ADK 3-tier rack Of course other rack units can be stacked and used. You can change the rack to your liking depending on the size of the equipment. On the exterior, there are impact scratches and line scratches. Also, casters are attached to the bottom (Tamura Eiji)
Accessories: no accessories
Main specifications: W574 x H635 x D500 mm 1 stage space H250 mm Second stage space H230 mm Weight 26.7 kg
ADK 3-tier rack Of course other rack units can be stacked and used. You can change the rack to your liking depending on the size of the equipment. On the exterior, there are impact scratches and line scratches. Also, casters are attached to the bottom (Tamura Eiji)
Accessories: no accessories
Main specifications: W574 × H580 × D500 mm 1 stage space H250 mm Second stage space H170 mm Weight 26 kg
A classic 3-tier audio rack from Hayami Kosan that is sturdy and easy to use. The load capacity of the top plate and bottom plate is 150 kg, so even heavyweight amplifiers can be mounted without difficulty. The exterior has scratches and dirt. There is a slight tobacco smell. (Miura Kimiya)
Accessories: There are no accessories
Main specifications: 3-tier rack Weight resistance: top plate/bottom plate 150 kg, shelf board 50 kg W626 x H522 x D582 mm 38 kg
A classic 3-tier audio rack from Hayami Kosan that is sturdy and easy to use. The load capacity of the top plate and bottom plate is 150 kg, so even heavyweight amplifiers can be mounted without difficulty. The exterior has scratches and dullness. There is a slight tobacco smell. (Miura Kimiya)
Accessories: There are no accessories
Main specifications: 3-tier rack Weight resistance: top plate/bottom plate 150 kg, shelf board 50 kg W626 x H522 x D582 mm 38 kg
England, which is said to have good sound loss, is a simple rack for target audio (model number unknown). The frame is made of metal and the board is wood. The exterior has marks that look like they have been gouged out on the top plate (Ryo Mizusaki)
Accessories: none
Main specifications: Approximately 345 mm between each board W506 x H845 x D404 mm (actual measurement) 9.5 kg (actual measurement)
This model has an open form and is perfect for heat dissipation. It is a weight rack whose spacing can be changed with L-shaped metal fittings and screws. There are screw holes on the top plate and sides, and stickers on the sides and back (Ryo Mizusaki)
Accessories: none
Main specifications: Shelf board size W525 x D470 mm total load approx. 250 kg W626 x D582 x H1122 mm 64 kg
Denon tempered glass inset rack The height of the shelf board can be changed to 4 levels. A 50mm thick high-density particle board is used on the outside, and a tempered glass inlaid 30mm thick high-density particle board is used for the shelf board. The top plate is decorated with glass, so it has a luxurious feel. Overall, line scratches and bumps are noticeable. Dullness, scratches, and insulator marks are also noticeable on the glass part. All screw hole caps on the top plate are not fixed and are easy to come off (Daiki Goto)
Accessories: none
Main specifications: Mounting limit weight, top plate, bottom plate 100 kg, shelf board 50 kg, W650 x H540 x D520 mm, 50 kg
This is a system upgrade type natural wood audio rack. Units can be stacked one after another in line with the increase in AV equipment. Since it is stackable, it is possible to change the size depending on the item, making it an easy-to-use model. The exterior has scratches, scratches, chips, etc. Also, each back cover is missing (Satoshi Yonejima)
Accessories: There are no accessories
Main specifications: using solid natural wood, W574 x H733 x D500 mm, 1 stage space H250 mm, 2 tiers, 3 tier space H169 mm, weight 36.5 kg
Hamilex 3-tier rack Full open design with excellent heat dissipation. A unit mechanism that can be joined on top and side, and special parts make it possible to securely fix it (Fujisawa Yukishi)
Accessories: spike, spike receiver
Main specifications: Total load capacity approx. 150 kg, top plate load capacity 50 kg or less, shelf board load capacity 50 kg or less, bottom plate load capacity 100 kg or less, W660 x D550 x H568 mm approx. 36 kg
This is a 2-tier rack from the British Sound Organization. The space design is perfect for those who have a compact size and a small system. The exterior has paint peeling and rust, and there are some veneer sheet floats on the shelves (Eiji Tamura)
Accessories: spikes
Main specifications: W495 x H360 x D400 mm shelf space 235 mm
A popular 4-tier audio rack. It has a sturdy construction with a metal frame. A space-saving design with the outer dimensions cut down to the last minute and the inner dimensions extended to the last minute. It brings out the performance of the device with tight and accurate sound quality. The exterior has bald paint and deflections on the shelves. (Miura Kimiya)
Accessories: spike, spike receiver
Main specifications: 4-tier rack cast iron frame W540 x D484 x H935 mm 41 kg
Disposal prices have been reduced. Member discounts are not applicable. 2022/11/20 sales price 178,000 yen MM RACK18 x 3-tier set. The spacing is 18 cm each. It is a rack with a skeleton structure without shelves. There are small scratches, dullness, etc. ※Shipping costs will be estimated separately (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H540 x D390 mm approx. 27 kg
This high-rigidity rack with a thickness of 50 mm uses Yamaha's traditional “fastening” structure combined with the “yatoi” method. It is a high-quality sound rack for enthusiasts that can be called the back pot of the former GTR-1B. The simple wood design also blends into the room (Fujisawa Yukishi)
Accessories: manual
Main specifications: load capacity 120 kg (top plate) 35 kg (shelf board) W580 x H440 x D440 mm mass 32 kg (including shelf board)
It is a beautiful item with the original box. This high-rigidity rack with a thickness of 50 mm uses Yamaha's traditional “fastening” structure combined with the “yatoi” method. It is a high-quality sound rack for enthusiasts that can be called the back pot of the former GTR-1B. The simple wood design also blends into the room (Fujisawa Yukishi)
Accessories: manual, original box
Main specifications: load capacity 120 kg (top plate) 35 kg (shelf board) W580 x H440 x D440 mm mass 32 kg (including shelf board)
Prices have been reduced. 2022/10/17 Rover's 4-tier audio rack with a sales price of 20,000 yen. The steel frame and shelves are made of MDF. Spikes and spikes are missing, but since they come with separate casters, they are easy to move around. There is a feeling of use such as scratches or rattling on the shelves (Katsutsugu Hiura)
Accessories: casters ※ spikes and spike receivers are missing
Main specifications: W585 x H905 x D488 mm (not including casters) Weight 17 kg
ADK DVD Soft Rack This is a set of DVD softbox SD-DVD1BN 6 stages and system upgrade kit SD-VD6PN. This rack is attractive because of the natural wood material, the grain and the fluctuation of color. Another point is that the DVD box board is made of solid wood. Each box can store approximately 51 DVDs (large) and 70 DVDs (small). There are some scratches all over (Daiki Goto)
Accessories: hex wrench
Main specifications: W840 x D250 x 148 mm (actual measurement) Weight 36.1 kg (actual measurement)
Vertical ADK rack The shelf board can also be attached, detached, and the steps can be adjusted, so it is an excellent item that can be adjusted according to your favorite height. Comes with an optional rack-carry RC-S10SDN, making it easy to move back and forth. There are small scratches and scratches scattered throughout. (Goto Daiki)
Accessories: wrench
Main specifications: W660 x H1272 x D558 mm Weight 44.25 kg
The price has been reduced. A popular 5-tier rack with an all-spike support structure with a sales price of 69,800 yen on 2022 10/31. It has a sturdy construction with a metal frame. The size is cut down to the last minute on the outer dimensions and extended to the last minute for a space-saving design. It brings out the performance of the device with tight, accurate sound quality. There are appearance, abrasions, and dullness (Kobayashi Hitoshi)
Accessories: spike holder
Main specifications: cast iron frame W540 x H1175 x D483 mm approx. 51 kg
Rigid, sturdy, 5-tier towel rack. It has a calm color and seems to fit right into the room. The exterior has many scratches and there is a feeling of use over time (Tomoho Asaine)
Accessories: none
Main specifications: load capacity 100 kg/1 tier shelf board spacing 180 mm (upper 3 tiers) 230 mm (bottom 1 tier) dimensions W600 x D550 x H943 mm weight 37 kg
Audio rack with mounting frame Holds 4 1U sized devices. Mounting screws are included. There are several noticeable scratches on the back of the top plate and the bottom plate (Murakoshi Yoichi)
Accessories: mounting screws (24)
Main specifications: Aperture W485 x H181 mm (including frame) W521 x H216 x D405 mm 7.2 kg
The price has been reduced. A popular 4-tier audio rack with a sales price of 59,800 yen on 2022 10/31. It has a sturdy construction with a metal frame. Space-saving design with outer dimensions cut down to the last minute and internal dimensions extended to the last minute. It brings out the performance of the device with tight, accurate sound quality. There are appearance, abrasions, and dullness (Kobayashi Hitoshi)
Accessories: spike holder
Main specifications: 4 tier rack cast iron frame W540 x D484 x H935 mm 41 kg
Popular 4-tier audio rack with casters (CS-120) It has a sturdy construction with a metal frame. Space-saving design with outer dimensions cut down to the last minute and internal dimensions extended to the last minute. It brings out the performance of the device with tight, accurate sound quality. There are small wounds and dullness, but they are relatively good (Oikawa Tetsuji)
Accessories: casters
Main specifications: 4 tier rack cast iron frame W540 x D484 x H935 mm 41 kg
The price has been reduced. 2022 10/7 sales price 20,000 yen*Inexpensive due to lack of 4 vertically connected dowels and 1 shelf board+4 dowels. It is a rack with a structure similar to a GT rack. It's heavy and well-built, so you can also set up a heavyweight amplifier. There are dark spots and small scratches on the exterior. Please note that the upper row is not fixed (Takasaki Atsushi)
Accessories: none
Main specifications: Size approx. W660 x H710 (450+260) x D560 mm Lower tier inner dimensions approx. W555 x H342 Upper tier inner dimensions approx. W555 x H200 Weight approx. 61 kg
※Inexpensive due to lack of glass doors, shelves, and dowels. Hamilex casual AV rack There is a hole in the back panel for cables to pass through, so wiring is possible. There is a small veneer peeling in the upper right corner, abrasions on the top plate, and bruises on the side edges and back (Kanai Hidetsugu)
Accessories: none
Main specifications: W1100 × H614 × D580 mm approx. 41 kg (when new)
The price has been reduced. 2022 9/30 Selling price 28,000 yen This rack has a spacious width, making it easy to assemble large amplifiers. It has a sturdy construction, and it is also possible to incorporate heavy amplifiers and players into the top plate. The exterior has dents, abrasions, and a feeling of use. One screw hole cap is missing (Katsutsugu Hiura)
Accessories: none
Main specifications: Outer dimensions: W1100 x H580 x D500 mm Internal dimensions: first stage W500 x H250 x D480 mm second stage W500 x H230 x D480 mm total weight 55 kg
Unspecified 3-tier rack. Comes with casters. The appearance and dullness are good, but the load capacity seems to be low ※ shipping costs will be estimated separately (Kobayashi Hitoshi)
Accessories: none
Main specifications: W800 × H540 × D490 mm 15 kg (actual measurement)
6-tier glass rack The details are unknown. There are small scratches, tape, and seal marks*Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: W605 x H1145 x D460 mm shelf board thickness 8 mm shelf width 1 tier 190 mm 2 stage 230 mm 3 stage 179 mm 4 stage 230 mm 5 stage 230 mm pole diameter 38 mm weight 39.6 kg
※Inexpensive due to poor condition such as abrasions. Yamaha's GT rack has high rigidity and excellent earthquake resistance. The main unit is 50 mm thick particle board, which firmly supports even heavyweight amplifiers. There is a feeling of use such as abrasions, bruises, dullness, etc. (Takasaki Atsushi)
Accessories: instruction manual
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
Hamilex heavyweight audio rack The height of the middle plate can be adjusted to 3 levels. This wooden rack features high weight and a stable mid-low range. There is no noticeable major damage, but there are small scratches and a feeling of use. There are 3 missing blindfold lids on the top plate. Shipping costs will be estimated separately (Fujisawa Yukishi)
Accessories: instruction manual
Main specifications: shelf board height lower side 180 to 235 mm (3 levels adjustment) W650 × H540 × D560 mm 44 kg (actual measurement)
This is an additional shelf board dedicated to the Quadraspire Q4D VENT. Why don't you get a separate pipe and increase the number of racks you have by 1 tier? There are some scratches (Fujisawa Yukishi)
Accessories: none
Main specifications: W600 x D472 mm thickness 25 mm
Horizontal rack made by Asahi Lumber. It is a model with plenty of storage capacity and adjustable height. As an audio rack, its performance is high, and it is a stable unit. It is made of full-bodied natural wood, and has a strong structure and high interior design. * Since this is a large product, shipping costs will be estimated separately. The exterior has scratches, threads, etc. Also, felt is attached to the bottom. (Satoshi Yoneshima)
Accessories: There are no accessories
Main specifications: W1,227 × D565 × H1,060 mm
A horizontal AV rack built with heat dissipation and wiring work in mind. The GS-602 can be stacked according to the application. A large TV can be installed. A maximum of 6 amplifiers, devices, etc. can be stored. Casters are not attached. There are insulator marks on the top plate, dents on the lower front, and scratches scattered all over (Kanai Hidetsugu)
Accessories: none
Main specifications: W1202 x H732 x D582 mm load capacity, overall/top plate/shelf/bottom plate 300/150/50/150 kg mass 83 kg
The price has been reduced! A stylish English-made audio rack with a sales price of 29,800 yen on 2022 10/1. All frames are welded together and are sturdy. The marble-like glass top has an elegant appearance and seems to blend well into the living room. There is a glass board on the 4 rubber bushings. The height of the shelves cannot be changed. The exterior has a feeling of use such as scratches and dullness (Tomonori Asane)
Accessories: none
Main specifications: W585 x H830 x D380 mm glass plate W430 x H6 x D360 mm from the top of the shelf space 131 mm 131 mm 150 mm 198 mm weight 22.9 kg (all measured)
Disposal prices have been reduced. Member prices are not applicable. 2022 8/3 sales price 19,800 yen TAOC SS series 1-tier rack. The sturdy construction brings out the performance of the equipment. The sound quality is typical of the tight and tight SS series. The exterior has rust floats and stains. (Tamura Eiji)
Accessories: There are no accessories
Main specifications: weight resistance 50 kg inner dimensions W488 x D439 mm size W540 x H82 x D484 mm weight 10 kg
It is a rack that combines excellent Scandinavian design with a strong structure using 38mm struts and 19mm thick MDF to achieve solid sound reproduction. A circular cut is applied to the back to make it easier to wire cables. The exterior is scratched and dirty (Sasaki Shota)
Accessories: spike, spike receiver
Main specifications: size W603xH698xD470 weight 16.7 kg (actual measurement) interboard space 1-2 shelves 228 mm 2-3 shelves 178 mm 3-4 shelves 178 mm versus load each shelf 50 kg (however, when using spikes (The total counterload of is 120 kg)
* Since there are many scratches and large scratches, it is inexpensive. TigLon's audio rack has been developed over 2 years and is finished without any compromise in terms of sound quality. Analog players and large amplifiers can also be installed. Natural sound is achieved with a simple structure without waste (Yosuke Kojima)
Accessories: none
Main specifications: load capacity 50 kg W600 x D500 mm shelf height 280 mm
TigLon's audio rack was developed over 2 years and finished without any compromise in terms of sound quality. Analog players and large amplifiers can also be installed. Natural sound is achieved with a simple structure with no waste. There is a small wound (Sasaki Shota)
Accessories: none
Main specifications: load capacity 50 kg W600 x D500 mm shelf height 280 mm
The disposal price has been reduced! (Member discounts are not applicable) 2022 8/12 Sales price 20,000 yen ※ It is inexpensive because the shelf board is out of stock. Yamaha GT rack with high rigidity and excellent earthquake resistance. The main unit is 50 mm thick particle board, which firmly supports even heavyweight amplifiers. There are small scratches, rubbing, etc. on the whole. (Hiroki Aso)
Accessories: none
Main specifications: body plate thickness 50 mm W580 × H440 × D440 mm weight 27.0 kg (measured value)
The price has been reduced. 2022 7/29 sales price 99,800 yen ※ 1 shelf board is missing. It comes with a caster base (RC-W20SDN) sold separately, but the carry handle is not included. Please use a commercially available ratchet wrench. Horizontal rack made by Asahi Lumber. It is a model that can hold up to 10 units and can even adjust the height. As an audio rack, its performance is high, and it is a stable unit. It is made of full-bodied natural wood, and has a strong structure and high interior design. If you use a caster base attached to the bottom, you won't feel inconvenient to move around. Bruises are scattered here and there. * Since this is a large product, shipping costs will be estimated separately (Murakoshi Yoichi)
Accessories: none
Main specifications: W1227 × H1140 × D566 mm 91 kg (6 stages)
The disposal price has been reduced! (Member discounts are not applicable) 2022 8/12 Sales price 20,000 yen ※ It is inexpensive because the shelf board is out of stock. Yamaha GT rack with high rigidity and excellent earthquake resistance. The main unit is 50 mm thick particle board, which firmly supports even heavyweight amplifiers. There are small scratches, rubbing, etc. on the whole. (Hiroki Aso)
Accessories: none
Main specifications: body plate thickness 50 mm W580 × H440 × D440 mm weight 27.0 kg (measured value)
Spikes, spike receptacle included! The popular Quadraspire 4-tier rack. In addition to the excellent design, the shelf board is sufficiently rigid despite its simple structure, and it is subtly curved and cut so that vibration components gather at the four corners. The exterior has line scratches, threads, dullness, etc. (Satoshi Yoneshima)
Accessories: spike, spike receiver
Main specifications: 4-tier rack shelf space 180mm W600 x H680 (including spikes) x D475 mm