* Since the label on one side is missing, it is cheap, and it is currently sold. Technics 5cm caliber horn tweeter unit. A lightweight, highly rigid plastic film is used for the diaphragm. You can easily enjoy the sound of a horn that sounds good. The label on one side is missing (Oikawa Tetsuji)
Maintenance Information: 2023.8.7 Operation confirmed
Accessories: none
Main specifications: 16Ω 101dB frequency band 3,000-20,000 Hz
※The remote control is missing. Maintenance such as battery (replacement) replacement has been carried out. AC & DC operation is possible. Technics thin control amplifier. It is an impressive car with few quirks and a straightforward, natural tone. It is a thin, space-saving model and is also recommended as a separate entry-level machine. Serial 0A9G02448 (Mizushima Itsuro)
Maintenance information: 2023.6.9 Maintenance completed (battery pack creation and installation, connector harness replacement, solder correction, charging test, DC and AC operation check, audio check for each input/output)
Accessories: instruction manual copy power cable
Main specifications: PHONO input (MM/MC) equipped, 2 output systems, W430 x H70 x D307 mm, 3.3 kg
※Since it is cheap, it is currently on sale. A small Technics speaker with 2 front and rear passive radiators arranged inside the enclosure. By hitting the woofer's sound once against a passive radiator, the ability to reproduce low frequencies over a normal size diameter is enhanced. Even though it's small, it lets in sound firmly, so it sounds solid and full of sound. The exterior has small scratches and dullness appropriate to the model year (Oikawa Tetsuji)
Maintenance Information: 2023.8.1 Operation confirmed
Accessories: none
Main specifications: 3 way 4 speaker bookshelf type anti-magnetic design playback frequency characteristics 40 Hz to 45 kHz 6 ohm 85 db dimensions W220 x H365 x D335 mm weight 10.5 kg
2022 model. A model that serves as a new reference for Technics' direct drive turntable system. By adopting a coreless direct drive motor, stable rotation and vibration reduction are achieved. Please enjoy the moment of interacting with music with the rich sound of analog records with this model. Externally, there are scratches on the dust cover. (MIURA Kimiya)
Maintenance information: 2023.7.5 operation confirmed
Accessories: instruction manual, power cord, phono cable, dust cover, EP adapter, 2 types of subweights
Main specifications: Direct drive turntable system (manual) rotation speed 33/45/78 rotation speed adjustment range ± 8/± 16% universal S-shaped tone arm static balance arm effective length 230 mm overhang 15 mm arm height adjustment range 0 to 6 mm needle pressure adjustment range 0 to 4 g (needle pressure direct reading type) 453 x H173 x D372 mm 18 kg
The 2X model is rarely in stock. This is a powerful MM cartridge where you can clearly feel the clear and delicate fine particle feel. As for the exterior, there is paint peeling on the body. (MIURA Kimiya)
Maintenance Information: 2023.7.19 Operation confirmed
Accessories: There are no accessories
Main specifications: MM-type needle pressure 1 to 1.5 g dead weight 6 g 10 Hz to 25 kHz
A headshell with a design similar to Technics' SH-98D. (TAMURA Eiji)
Maintenance Information: 2023.7.19 Continuity Confirmed
Accessories: none
Main specifications: dead weight 9g
※The dust cover, subway, and rubber mat are missing. Maintained! Hingeless dust cover A classic record player that Technics is proud of. In addition to a simple design that is easy to use with a reasonable arrangement, stable operation and outstanding durability. This model is recommended both as an introductory model and as a secondary unit. There is a feeling of use such as scratches, dirt, and sunburn on the phono cable terminal. Serial unknown (Takasaki Atsushi)
Maintenance information: 2023.7.11 Maintained (tone arm bearing cleaning, variable pitch control slide VR disassembly, variable pitch control burr pitch center speed reset after carbon coating part oil cleaning, CA test is also good)
Accessories: copy of instructions, slip mat, EP adapter
Main Specifications: Quartz Rock Direct Drive, Full Manual Type, 33/45 Rotation, Pitch Control Adjustable, W453 x H360 x D162 mm, 12 kg
※Shipping service. No. 64 Special Feature = Capabilities of the 55 Latest Amp Models Explored with Speaker Compatibility Tests/Listening to Tannoy Westminster by All Horns/Uesugi Yoshiro Freizai/Hakata JBL Club/Published on 1982/10/15. Published models: QUAD/34, FM4 TANNOY/EDINBURGH VICTOR/SX-10 SPRIT PIONEER/S-955_3 MUSIC REFERENCE RM-5 ACOUSTAD/TRANS-NOVA TWIN200 JBL/4411 MISSION/770,776,777,773HC,774,775 DENON/DL-1000A KEF/MODEL 203, MODEL 204 PIONEER/S-922_2 TECHNICS/SB-7A DENON/DP-57L MICRO/BL-10X AUDIO-TECHNOICA/AT-32E2 SONY/XL-MC1, HA-T10 PICKERING/XSV_5000 COUNTERT/POINSA-2 The photo is a sample, so the actual item may be broken, have marks, etc.
*Currently sold. MC head amp powered by batteries. You can also check the battery by switching the knob. This is a DC type head amplifier that allows you to enjoy the sound of a cartridge straight away. The exterior is dull (Oikawa Tetsuji)
Maintenance Information: 2023.7.17 Operation confirmed
Accessories: instruction manual, original box
Main specifications: size W140 x H55 x D265 mm weight 1.1 kg (batteries not included)
The price has been reduced. 2023/7/6 sales price 2,500 yen. A popular classic headshell in combination with the SL-1200 series. It is made of high-rigidity die-cast aluminum and firmly supports the cartridge (Murakoshi Yoichi)
Maintenance Information: 2023.7.1 Continuity Confirmed
Accessories: none
Main specifications: die-cast aluminum, self-weight 10.2 g
The price has been reduced. 2023/7/6 sales price 2,500 yen. A popular classic headshell in combination with the SL-1200 series. It is made of high-rigidity die-cast aluminum and firmly supports the cartridge (Murakoshi Yoichi)
Maintenance Information: 2023.7.1 Continuity Confirmed
Accessories: none
Main specifications: die-cast aluminum, self-weight 10.2 g
※The rubber mat and weight are out of stock. Hingeless dust cover A classic record player that Technics is proud of. In addition to a simple design that is easy to use with a reasonable arrangement, stable operation and outstanding durability. This model is recommended both as an introductory model and as a secondary unit. Overall, a feeling of use, such as dullness and abrasions, remains. Serial GE1JC002241 (Mizushima Itsuro)
Maintenance Information: 2023.7.4 Operation confirmed
Accessories: copy of instruction manual
Main Specifications: Quartz Rock Direct Drive, Full Manual Type, 33/45 Rotation, Pitch Control Adjustable, W453 x H360 x D162 mm, 12 kg
※The rubber mat and weight are missing, and the dust cover is cracked and distorted, making it cheap. Hingeless dust cover A classic record player that Technics is proud of. In addition to a simple design that is easy to use with a reasonable arrangement, stable operation and outstanding durability. This model is recommended both as an introductory model and as a secondary unit. Overall, a feeling of use, such as dullness and abrasions, remains. Serial GE1JC002243 (Mizushima Itsuro)
Maintenance Information: 2023.7.4 Operation confirmed
Accessories: copy of instruction manual
Main Specifications: Quartz Rock Direct Drive, Full Manual Type, 33/45 Rotation, Pitch Control Adjustable, W453 x H360 x D162 mm, 12 kg
Maintenance such as speaker terminal replacement has been completed! It is a very cost effective power amplifier. The loss is good from the middle to high range, and the sharpness is good. It seems to go well with vocals and acoustic songs. The smart front design, including the meter panel, is also one of the attractions. There is a feeling of use such as appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2023.7.9 Maintained (speaker terminal (external product) replaced. Output relay replacement. Input volume contact modification. (Main amplifier and others soldering deterioration correction)
Accessories: copy of manual, power cord
Main specifications: 70W+70W (8Ω) MOS-class AA circuit power consumption 210 W input level adjustable (with direct input) W430 x H136 x D344 mm 9.8 kg
Operation has been confirmed at 100V. A sturdy, classic player that's also great for beginners. The MK2 was the first in the series to be equipped with pitch control. It is a product that uses a continuous pitch control system for quartz synthesizers and boasts excellent stability and durability. The exterior has abrasions, dullness, etc., and a feeling of use.
Maintenance Information: 2023.7.2 Operation confirmed
Accessories: dust cover, subweight, single adapter
Main Specifications: Quartz Direct Drive, 33/45 Rotation, Universal S-shaped Static Balance/Gimbal Suspension System, Arm Height Adjustment Range 6mm, Needle Pressure Adjustment Range, 0 to 2.5 g, Applicable Cartridge, Standard Weight, 6 g to 10 g, W453 x H162 x D360 mm, 12.5 kg
Technics stereo graphic equalizer A stereo graphic equalizer with 12 independent left and right elements and equipped with a spectrum analyzer. It is equipped with a spectrum analyzer that uses a high-precision FL bar graph, and can display each frequency level and overall level of 12 points. The exterior has abrasions, rust, and dullness (Murakoshi Yoichi)
Maintenance information: 2023.7.5 sound output confirmed
Accessories: none
Main specifications: W430 x H108 x D272 mm Weight 4.3 kg
Details unknown, headshell similar to the appearance of the Technics SH-98D. It is a dish that has a simple structure and seems to be easy to use (Kanai Hidetsugu)
Maintenance Information: 2023.5.27 Sound output confirmed
Accessories: none
Main specifications: dead weight 9g
※Shipping service. Stereo Sound Supplement/HI-FI COMPONENTS SERIES VOL.5/World Audio Technics. The photo is a sample, so the actual item may be broken, have marks, etc.
This is a SPU subweight compatible with BELLDREAM's TECHNOICS SL-1200 record player tone arm. If you've been looking for one, please take this opportunity! The appearance is dull (Kobayashi Hitoshi)
Accessories: none
Main specifications: Compatible player models: SL-1200, SL-1200MK2, SL-1200MK3, SL-1200MK3D, SL-1200MK4, though,,,,,,, (limited model) SL-1200MK5 SL-1200MK6 SL-1200LTD SL-1200GLD SL-1200GAE
A model that serves as a new reference for Technics' direct drive turntable system. By adopting a coreless direct drive motor, stable rotation and vibration reduction are achieved. Please enjoy the moment of interacting with music with the rich sound of analog records with this model. There is a slight feeling of use on the exterior (Murakoshi Yoichi)
Maintenance information: 2023.7.1 sound output confirmed
Accessories: instruction manual, power cord, phono cable, dust cover, EP adapter, 2 types of subweights
Main specifications: Direct drive turntable system (manual) rotation speed 33/45/78 rotation speed adjustment range ± 8/± 16% universal S-shaped tone arm static balance arm effective length 230 mm overhang 15 mm arm height adjustment range 0 to 6 mm needle pressure adjustment range 0 to 4 g (needle pressure direct reading type) 453 x H173 x D372 mm 18 kg
A model that serves as a new reference for Technics' direct drive turntable system. By adopting a coreless direct drive motor, stable rotation and vibration reduction are achieved. Please enjoy the moment of interacting with music with the rich sound of analog records with this model. On the outside, there are scratches on the dust cover. Serial LA6SA001105 (Miura Kimiya)
Maintenance information: 2023.6.22 Operation confirmed
Accessories: instruction manual, original box, power cable, connection cable, subweight x 2 types
Main Specifications: Direct Drive Turntable System 33/45/78 Rotation Speed Adjustment Range ± 8/± 16% Universal S Shaped Tone Arm Static Balance Arm Effective Length 230 mm Overhang 15 mm Arm Height Adjustment Range 0 to 6 mm Needle Pressure Adjustment Range 0 to 4 g (Direct Reading of Needle Pressure) W453 x H173 x D372 mm 18 kg
※It is cheap because it is in poor condition. A long-selling player that Technics is proud of. It boasts a simple design that is easy to use, stable operation, and durability. The clear contours, high earthquake resistance, highly accurate tone arms, etc. all have an attractive degree of perfection that exceeds the price. ※The subweight is missing, and there is no dust cover hinge. There is a lot of feeling of use, such as the exterior, paint drops on the front corner, dullness, abrasions, etc. (Murakoshi Yoichi)
Maintenance Information: 2023.6.18 Operation confirmed
Accessories: turntable seat
Main specifications: quartz control direct drive system rotation speed 33/45 rotation speed fine adjustment range ± 8% (continuously variable) W453 x H162 x D360 mm approx. 12.5 kg
※There is no problem with operation, but since it is cheap, it is currently sold. A 5 cm caliber horn tweeter from Technics. You can enjoy clear sound without any habit. There is dullness appropriate to the model year (Oikawa Tetsuji)
Main specifications: Aluminum-deposited polyester film diaphragm using impedance 8 ohms maximum input 25 W frequency band 3 to 20 kHz output sound pressure level 100 dB W 68 x D48 (mm) 0.25 kg
*Currently sold. A Technics tall boy that employs a DDD system that drives in the same phase by placing 2 sets of woofers with passive radiators in front and rear. The sound is straightforward and transparent, which is typical of the company, and is compatible with various music genres. I feel the cost performance is high (Murakoshi Yoichi)
Maintenance Information: 2023.6.4 Sound output confirmed
Accessories: saran net, jumper
Main specifications: 3-way 6Ω 86db W214×H890×D365 mm18.5kg
A record player system based on basic designs such as the coreless direct drive motor and 2-layer housing adopted in the SL-1200GR. It has a built-in PHONO equalizer, so it can be connected directly to an audio device. It is also equipped with a simple auto lift up function (there are times when it cannot be handled depending on the width of the inner groove), so everyone from beginners to advanced subsystems can easily and deeply enjoy it. Externally, there are scratches on the dust cover. Serial GM2SH001074 (Miura Kimiya)
Maintenance Information: 2023.6.21 Operation confirmed
Accessories: instruction manual, cartridge 2M RED, head shell, power cable, RCA cable, original box, EP adapter, subweight
Main specifications: Direct drive universal S-shaped tone arm, static balance arm, effective length 230 mm, overhang 15 mm, applicable cartridge, auxiliary weight, 14.3-20.7 g (including headshell) when using auxiliary weight, 18.7 to 25.1 g (including headshell) output terminal/PHONO terminal x 1, PHONO ground terminal x 1, LINE output terminal x 1 W453 x H169 x D372mm 9.9kg
This is an arm base for SAEC WE-407/23 for the SP-10MK2 and SP-20 turntable cabinet SH-10B3. If you've been looking for one, don't miss this opportunity. The exterior is dull and has a feeling of use (Hiura Katsutsugu)
Accessories: screws
Main specifications: 394 g (actual measurement)
Raging maintenance has been completed! High performance 33-segment stereo graphic equalizer. You can adjust the room's sound field in detail and easily. You can enjoy intuitive operation adjustments that suit your preferences. There is a dent on the top plate and there is a big scratch (Murakoshi Yoichi)
Maintenance information: 2023.5.29 maintenance (68 slide volume disassembly, sliding rail carbon body, brush cleaning, sliding oil application. (Solder correction and riveting part correction within the foundation, and reassembly.)
Accessories: none
Main specifications: 16 Hz to 25 kHz band 33 divisions (left and right) center frequency 20 Hz to 400 Hz band level control ±12 dB dimensions W430 x H153 x D330 mm weight 6.8 kg
Since there are many scratches, it is inexpensive and sold as is. Technics 3-way bookshelf speaker A honeycomb flat unit is used. There are many signs of use such as abrasions on the top plate and sides, and scratches on the corners (Kobayashi Hitoshi)
Maintenance information:2023.5.26 operation confirmed
Accessories: saran net
Main Specifications: 3-way 3-speaker bass reflex 6Ω 89dB crossover frequency 2kHz, 4.5kHz W223×H378×D207mm 5.3 kg
The D/A converter reigned supreme as the top model of Technics. It is equipped with a MASH system and is extremely robust, just like the transport part. The color luster unique to 1-bit DACs is attractive, and the relaxed, detailed, and mild tone is attractive. It was particularly popular with classical fans. Serial FJ0AA01092 has lines and dullness on the exterior (Katsutsugu Hiura)
Maintenance information:2023.6.10 Sound output confirmed
Accessories: none
Main specifications: 3 chips, 1 bit, MASH method, coaxial x 1, optical x 3, W484 x H139 x D419 mm, 20 kg
*Currently on sale. MC head amplifier powered by batteries. You can also check the battery by switching the knob. This is a DC head amplifier that allows you to enjoy the sound of the cartridge straight away. The exterior is dull. Serial WA619B192 (Satoshi Yonejima)
Maintenance information: 2023.6.9 operation confirmed
Accessories: no accessories
Main specifications: size W140 x H55 x D265 mm weight 1.1 kg (batteries not included)
Technics's first MC cartridge. Uses a titanium nitride cantilever and coreless twin ring coil system. You can enjoy all genres at the flat typical of the company (Itsuro Mizushima)
Maintenance information: 2023.6.6 operation confirmed
Accessories: instruction manual, head shell, original box
Main specifications: MC type output voltage 0.1 mV frequency characteristics 10 Hz to 50 kHz needle pressure 1.7 to 2.3 g 15 ohms own weight 6.9 g
Technics premium tonearm Boron is used in the arm pipe, and you can enjoy accurate and straight sound with a structure that completely eliminates unnecessary resonance. Fairly good (Daiki Goto)
Maintenance information: 2023.6.8 storefront operation confirmed (continuity test, pivot, moving part, sensitivity test OK)
Accessories: instruction manual, arm cable
Main specifications: static balance type, total length: 350 mm, execution length: 250 mm; suitable weight: 14.5 to 19.5 g; needle pressure: 0 to 3 g
Maintained. Technics thin preamp. It has a clean sound, and is one where you can relax and enjoy music without getting tired of listening. The fact that the tone control is substantial is also impressive. There are scratches on the top plate and there is an overall feeling of use (Daiki Goto)
Maintenance information: 2023.6.8 Maintained (phono selector, input selector, reckout switch disassembly polishing grease application, flat amplifier section operation amp, capacitor replacement, solder repair, various volumes, switch cleaning, interior and exterior cleaning, operation confirmation. (*Even if the phono selector switch is disassembled and polished, noise will come out when switching while making a sound, so please reduce the volume when switching.)
Accessories: copy of instruction manual
Main specifications: Phono MM/MC compatible, 2 line inputs W430 x H97 x D360 mm 5.5 kg
Technics die-cast aluminum headshell It is a popular shell with an overhang adjustment scale and excellent operability and design (Mizusaki Ryo)
Maintenance information: 2023.6.2 sound output confirmed
Accessories: none
Main specifications: 9.5g own weight
The price has been reduced! 2023/4/30 sales price 29,800 yen A radial horn unit with a cutoff frequency of 330 Hz. It is for 1 inch and can be attached to JBL2410, etc. The exterior is dull, etc., and there is a feeling of use (Asae Tomonori)
Main specifications: recommended crossover frequency 700 Hz or more directivity horizontal 90° vertical 40° throat diameter φ25.4 mm weight 2.6 kg
A simple test has been completed, but since it is inexpensive, it will be handed over as is. It is an analyzer that can measure the listening room environment and speakers. Measurements can be made in the 20Hz to 20kHz band. It is battery-operated and compact, and easy to use is also attractive. On the exterior, there is a slight feeling of use such as dullness (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple operation confirmed
Accessories: original box, instruction manual (copy)
Main specifications: oscillation signal wobble tone (modulation frequency 8 Hz) oscillation frequency 20 to 20 kHz (measurement point 31) power supply 9 V battery (S-006P x 1) microphone type back electret condenser type directional characteristics omnidirectional frequency characteristics 20 Hz to 20 kHz power supply 1.5 V (SUM-3 × 1) W430 x H53 x D158 mm 1.0 kg
A simple test has been completed on the SH-8000, but since it is inexpensive, it will be handed over as is. Sound field measurement microphone that can be used with the Technics analyzer SH8000. The tip of the cord is a 2P phone jack. You can use it with your own analyzer etc. (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple check completed
Accessories: stand, original box
Main specifications: Back electret capacitor type omnidirectional for sound field measurement
A popular classic headshell in combination with the SL-1200 series. It is made of highly rigid die-cast aluminum to firmly support the cartridge (Itsuro Mizushima)
Maintenance information: 2023.5.29 Confirmation confirmed
Accessories: none
Main specifications: die-cast aluminum, own weight 10.2 g
A popular classic headshell in combination with the SL-1200 series. It is made of highly rigid die-cast aluminum to firmly support the cartridge (Itsuro Mizushima)
Maintenance information: 2023.4.23 sound output confirmed
Accessories: none
Main specifications: die-cast aluminum, own weight 10.2 g
The price has been reduced! 2023/5/5 sales price 1,200 yen A genuine rubber mat for the SL-1200MK5 and MK6 record players. It hasn't hardened and is soft, so you can still use it. The exterior is dull (Tomonori Asae)
Accessories: none
Maintained! A record jacket-sized masterpiece player that was released to commemorate the 10th anniversary of Direct Drive. The cartridge comes with AT332EP, which is equivalent to Technica's AT32E/2. In addition to its compact design and repeat function, it is a very convenient gem, with a mute function for a while after the needle falls, automatic detection of the size of the board, and the ability to be used at an angle or upside down. It's easy, but it's also recommended for those who want to be particular about sound quality. There are small scars and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2023.4.19 Maintained (grease up on motor bearings, linear tracking drives, tone arms and arm lifters. Replace deteriorated electrolytic capacitors. The internal lighting was changed to the light bulb color LED. Strobe LED replacement. Various SW disassembly contact polishes. Create a driving rubber belt. Check the turntable rotation speed. Check arm needle pressure. Check the sound output. Simple exterior cleaning, comprehensive operation confirmation inspection. Due to deterioration, the AC cable was replaced with a compatible cable (brand new) from the service stock, and a new audio cable was created)
Accessories: copy of instruction manual, cartridge (audio-technica AT322EP), power cable, connection cable
Main specifications: quartz lock direct drive MC head amplifier built-in linear tracking fully automatic player W315 x H88 x D315 mm 6.5 kg
Headshells from the heyday of Technics. Overhang can be adjusted by moving the base attached to the upper flathead screw. There is dirt on the exterior (Tamura Eiji)
Maintenance Information: 2023.5.20 Confirmation Confirmed
Accessories: none
Main specifications: weight 9.2g
It is a lightweight technics shell that is rarely in stock. It's wide, so it seems easy to use. The exterior is dull (Satoshi Yonejima)
Maintenance Information: 2023.5.20 Confirmation Confirmed
Accessories: no accessories
Main specifications: aluminum press processing, own weight 8 g
Maintained. Technics made-to-order model SE-A5000. The ClassAA amplifier's delicate, well-focused sound expression is appealing. The parts used are also gorgeous, and they are particular about made-to-order production, such as a 2mm thick and 10mm wide oxygen-free copper busbar for the ground line, LC-OFC and OCC cords for wiring materials, and DC/normal input terminals with gold plating. The large VU meter realistically transmits sound vibrations. There is a feeling of use on the exterior, abrasions, dullness, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.5.2 maintenance completed (removal, polishing and cleaning of 10 parts of the board and connectors)
2021.8.28 Maintained (drive part corrected. Removing anti-vibration rubber that interferes with heat dissipation. AC cord replacement. Output relay replacement. Cord stopper replacement Solder repair. Connector cleaning. Increase the earth and tighten. Remove excess washers. Bias and offset checks. Output sound check. (Interior and exterior cleaning)
Accessories: none
Main specifications: 200W+200W (6Ω) W484 x H207 x D475mm weight 34 kg
※Shipping service. 50th Issue Commemorative Special Feature = Glorious Components/Looking Back on the Journey of Issue 50 · Predicting Tomorrow in the World of Dreamy Audio/1979.4.15 issue/ Published models: BEVERIDGE/SYSTEM2SW-1 THORENS/TD126 MK3C_MC SANSUI/AU-X1 SONY/TA-N9 VICTOR/M-7050 STAX/CA-X PIONEER/PL-L1 DENON/DL-303 MICRO/RX-5000, RY-5500 SELESSION/DITTON662 MICRIO/BL-91 BOSE/901SERIES4 MCINTOSH/C29 HALAMP/HYPOSE TYPE2 EMPIE/EDR POINT9 LUXMAN/MQ68C, L-309X DENON/SC-101 SONY/SS-G4 VICTOR/QL-F6 AUDIO NOTE/AN-S4_2 TECHNICS/SP-15, SH-15B1 SONUS/GOLD SERIES BLUE LABEL AUDIO INTERFACE/CST 80EO3 SPATIA/MODEL TVA-1. The photograph is a sample, so the actual item may be broken or written on it.