Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It has a light weight and is compatible with various cartridges and tone arms (Tamura Eiji)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: case
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
This is the green type of the company's Prestige series. It has high tracing ability and plays a sound with good localization (Tamura Eiji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: case, instruction manual, needle cover
Main specifications: frequency characteristics 10 to 50,000 Hz, suitable load, 47 kΩ, output, 5 mV, suitable needle pressure, 1.5 g, oval needle, dead weight 5.5 g
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
The uncompromising construction is excellent, with an aircraft-grade machined aluminum block chassis. I am amazed at its compactness and beauty. I'm only particular about the expressive power of the silent part, and the way the faint sound disappears is as clear as if you take your breath away. It's true that it makes me lament the warmth of human skin. Serial SE0950 (Fujisawa Yukishi)
Maintenance information: 2024.5.12 operation confirmed
Accessories: remote control, instruction manual, power cord
Main Specifications: Input Terminal Unbalance (RCA) 2 Systems/Balance (XLR) 2 Systems/Bypass, Unbalanced (RCA) 1 System Output Terminal Unbalance (RCA) 1 System/Balance (XLR) 1 System Input Impedance/Unbalance 48kΩ/Balance 48kΩ Dimensions W348 x H75 x D191 mm (maximum dimensions) Weight 4.2 kg
*Genuine Oba Shoji product. Although it is a low-end model, the integrated chassis made from a newly selected 6061 aircraft-grade hard aluminum block has an excellent design. The view is good, and the expression of silence gives a sense of comfort. There is a scratch on the front of the exterior. Serial SD1019 (Yonejima Satoshi)
Maintenance information: 2024.5.12 Operation confirmed.
Accessories: instruction manual, power cord
Main Specifications: Continuous Effective Output: 100W x 2 (8Ω) Frequency Band: 5Hz-65kHz, 3dB Dynamic Range: 110dBA Damping Factor: 1000 @1kHz8Ω Gain: 26dB Input Impedance: 40kΩ Input: Balanced (XLR) 1 System Output: 1 System (using CARDAS binding posts) Dimensions: W348 x H75 x D186 (mm) Weight 3.4 kg
Set of 4 Made from Hokkaido Asada cherry wood and African ebony. It doesn't tighten too much as a metal insulator, and it makes the most of the sound of the music. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W70×D70×H35mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
※Only 1 speaker cable 4.0m terminal is a popular sold out speaker cable for the CARDAS entry series, unprocessed (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
The power cable has a 1.0m PSE and uses an unplated WATTGATE plug for the US A2D shielded power cable. It is a high cost performance cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Continuity confirmed
Accessories: none
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. The exterior has a feeling of use such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. The exterior has a feeling of use such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. The exterior has a feeling of use such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Main specifications: load capacity 50 kg (4 pieces) body height 19 mm spike height 5 mm
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Main specifications: load capacity 50 kg (4 pieces) body height 19 mm spike height 5 mm
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Main specifications: load capacity 50 kg (4 pieces) body height 19 mm spike height 5 mm
The latest cable technology has been introduced, such as a domestic high-purity PVC conductor (premium virgin oxygen-free copper) insulator, air-containing PE material (30% air content), and a 2-core twist structure for the 0.6 m pair conductor of the RCA cable. It has a clear and sharp AET sound (Jun Tamai)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
USB cable 2.0m B-A type. The sound image floats up softly, and freshness and warmth coexist, and it is a cable that clearly emits the sound typical of Scandinavia. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: original box
Unopened item! Power cable 1.8 m LUXMAN reference cable JP series High-purity oxygen-free copper (OFC) 0.26 mm x 66 bars are used as conductors. It uses a 2-core non-twist structure to achieve smooth sound quality (Kojima Yosuke)
Accessories: original box
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. Front serial 30300 (Tomonori Asaine)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Maintained by the manufacturer! *The FR-54 lifter is broken, and the inside force canceller weights are out of stock, but parts cannot be obtained, so this part is the current situation. A record player with FR's FR-54 mounted on DENON's DP-3000! The cabinet is a DK-100F, a turntable with precise rotation and a smooth tone, and an arm with a simple form without unnecessary decorations and a stable stability arm, and a very practical system. There is a feeling of wear on the exterior, such as scratches and dullness. Serial 450206 (Asaine Tomoho)
Maintenance information: 2024.5.3 Denon maintained (16 phono motor transistors replaced. (Missing arm parts are currently sold because parts cannot be obtained, check the sound output)
Accessories: copy of instruction manual
Main specifications: DP-3000 servo type direct drive speed 33 1/3, 45 rpm FR54 static balance type short arm effective length 245 mm needle pressure range 0 to 3 g compatible cartridge weight 3 to 20 g overall part W530 ✕ H180 ✕ D435 mm
The price has been drastically reduced! 2023/5/10 sales price 298,000 yen Maintained! A powerful Alnico magnet driver that can handle the A5 mid-range. The dense mid-high, which can only be produced by the biggest heavyweight compression driver in the series, seems to penetrate the entire body with a rich and rich sound. There is a feeling of use on the exterior due to dullness, rust, scratches, etc. (Jun Tamai)
Maintenance information: 2024.5.10 maintained (magnetic circuit rust removal/gap cleaning/center adjustment, diaphragm gap correction, sound absorption material, brand new attachment, terminal cleaning, screw replacement nut, washer rust removal, bolt rust removal/fixed exterior cleaning)
Accessories: none
Main specifications: frequency characteristics, 500 Hz to 16 kHz, 16 ohms, allowable input, 40 W, output, sound pressure level, 112 dB/w/m, suitable crossover, 500 Hz, voice coil diameter 71 mm, compatible horns/311-90, 311-60, 329A/multi-seller horn diameter 179 x depth: 148 mm, 13.3 kg/book
The disposal price has been reduced! (Member prices are not applicable) 2024/5/3 sales price 25,000 yen ※It is cheap because it has a cigarette smell and tar stains. It is heavier than normal because there is filler in the struts. This speaker stand is optimized for the LS50 series and the company's bookshelf speakers and is tuned to maximize performance. There are scratches and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: spikes
Main specifications: Speaker stand dimensions W226 ✕ H657 ✕ D308 mm, weight 9.3 kg (actual measurement)
The price has been reduced! 2024/4/18 sales price 59,800 yen ※Since it is a commercial device, it will be handed over as is. It's a very powerful sound unique to professional machines, and it pushes the sound forward and forward. Recommended for jazz and rock fans with large woofers. The exterior has scratches, bumps, etc. Serial JP01026 (Tamura Eiji)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: No accessories
Main specifications: 240W+240W (8Ω) 480W (16Ω MONO) with peak output meter W480 × D413 × H183 mm 20.5 kg
The price has been drastically reduced! 2024/5/10 sales price 128,000 yen Maintained! Compact yet powerful. The clear, intense expression and sense of dynamism are attractive pre-main. I'm amazed at how much it feels to drive more than its size. The way it can easily drive everything from bookshelves to medium speakers is impressive. There are no noticeable scratches, but there are stains on the top plate. Serial 63424 (Fujisawa Yukishi)
Maintenance information: 2024.5.10 Maintained (main VOL cleaning, other internal checks. Replace deteriorated capacitors. Operation check)
2021.12.24 Maintained (resoldering part of the pattern in the board, replacement of other pre-section bypass capacitors, SW, VOL cleaning)
Accessories: power cord, connection cord
Main specifications: 1 RCA input, 3 DIN inputs, dimensions W205 x H76 x D276 mm, weight 4 kg
The price has been drastically reduced! 2024/4/27 sales price 39,800 yen Center speaker using the same unit as the LS60. The luxurious 3-way specification helps build a theater system. On the exterior, there is a feeling of use, such as small scratches scattered on the top plate. There are small scratches on the exterior. Serial FY00030004240 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: spike, spike base
Main specifications: 16.5cm double woofer 3-way 4-speaker impedance 6Ω playback frequency band 50-40kHz allowable input 150W dimensions W672 x H217 x D235 mm weight 14.4 kg
Set of 4. High quality banana plugs made from machined solid brass. The terminals are machined from solid brass and finished with 24K gold plating. Since there are fixing screws at the tip and the root, the cable can be firmly fixed. The exterior has dullness on the plating part (Hiroki Aso)
Accessories: none
Main specifications: machined solid brass, 24K gold plating, 21.5g/piece
Set of 4. High quality banana plugs made from machined solid brass. The terminals are machined from solid brass and finished with 24K gold plating. Since there are fixing screws at the tip and the root, the cable can be firmly fixed. The exterior has dullness on the plating part (Hiroki Aso)
Main specifications: machined solid brass, 24K gold plating, 21.5g/piece
Output transformer sale push-pull output 15 W primary: 8 kΩ secondary: 4/8/16 Ω W97 x H80 x D86 mm approx. 1.9 kg/piece (actual measurement, not including protrusions) There is a dull item with the original box, but it seems to be an unused item due to the condition of the terminals!
Accessories: original box
* Distortion was confirmed during the sweep check, but since it is at a level where there is no problem with the music signal, it is currently sold. I made my own saran net. A mellow, soft tone that feels good to the ear. The size is also easy to handle and I think it's easy to use. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed (distortion occurs during sweep, but this is a level where there is no problem with the music signal)
Accessories: saran net
Main specifications: 2 way 2 speakers, bookshelf type, dumped bass reflex system, playback frequency 32 to 20,000 Hz, impedance 8 ohms, efficiency 88 dB, maximum input, 35 W, W290 x H500 x D250 mm, 9.25 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 28,000 yen*2 shelves are missing. This model has an open form and is perfect for heat dissipation. This is a weight rack whose spacing can be changed with L-shaped brackets and screws. There are many dents and line marks on the exterior, top surface, and shelf boards, and dullness and a feeling of use can also be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: shelf board size W525 x D470 mm total load capacity approx. 250 kg W626 x D582 x H1122 mm 64 kg
This is a 6-port power strip using a machined duralumin housing. A high C/P model that uses a high cost system with a complete parallel connection to prevent noise. It is a well-balanced model with a high level of SN, delicacy, and texture (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
Main specifications: 6 port dimensions W400 x H43 x D70 mm
Set of 2 High vibration damping due to the 7-layer structure of a special coating containing metal powder. There are female screws on the four corners of the back to which spikes can be attached. There is a slight feeling of use such as a scratch on the top plate (Mizushima Itsuro)
Accessories: none
Main specifications: W350 x D450 x H52 mm 7 kg/sheet
The price has been reduced! 2024/5/2 sales price 278,000 yen Maintained in 2022! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. The exterior has bumps, line scratches, and corrosion on the back. Serial 604090021 (Fujisawa Yukishi)
Maintenance information: 2022.3.20 maintained (main amplifier circuit output relay replacement, headphone relay replacement, power supply transistor replacement, protector part transistor replacement, solder repair, input selector, power amplifier direct, source direct, tape, reck out switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, offset adjustment, operation confirmation)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/24 sales price 118,000 yen*Saran net is cheap because it is not in good condition due to missing or scratched surfaces. ATC small bookshelf The thick and powerful mid-low range is attractive. If you pair it with a good amplifier that has torque, you can enjoy it on a scale that greatly exceeds its size. There are scratches on the exterior. Serial 0819/0820 (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: No accessories
Main specifications: 2 way, 2 speakers, sealed impedance 8 ohms, size W211 x H380 x D250 mm, weight 11.4 kg
An outlet plate made of 5mm thick machined aluminum alloy with a beautiful surface treatment unique to ORB. The play structure and physical properties with excellent stability express sound quality that is crystal clear and speedy than ever before (Mizushima Itsuro)
Accessories: bag, screws
Main specifications: UL standard product (cannot be used with JIS standard outlets)
Set of 4 TIGLON magnesium spike holder Made of 100% pure magnesium, you can get a clear sound that suppresses unnecessary vibrations (Mizushima Itsuro)
Accessories: none
Main specifications: thickness 10mm diameter 33mm 14g/1 piece
Set of 4 TIGLON magnesium spike holder Made of 100% pure magnesium, you can get a clear sound that suppresses unnecessary vibrations (Mizushima Itsuro)
Accessories: none
Main specifications: thickness 10mm diameter 33mm 14g/1 piece
A simple and easy to use Chikuma power box. It contributes to improving the audio environment around the power supply. There is a slight feeling of use such as small scratches (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: power cable
Main specifications: rated voltage 125V, number of output ports, 6 ports, chassis material A6063/A5052, W60 x H49 x D340 mm, 1.2 kg