The price has been reduced. 2024/4/29 sales price 8,000 yen. *Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. The exterior has scratches, dirt, rust, and a feeling of use (Hiura Katsuji)
Accessories: none
Main specifications: diameter 60 x height 45 mm weight 800 g/piece plate diameter 35 x height 5 mm weight 40 g/piece
※ Because it is cheap, it is currently sold. Switchable tone controller. You can adjust the low and mid high range tones according to the frequency characteristics of the system (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual, power cable
Main specifications: variable frequency low range 30/60/120 Hz, medium and high frequency range 5K/10K/15 kHz
An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By attaching it, the sound of a horn that is too strong is moderately diffused and calmed down. There is dirt, dullness, etc. (Oikawa Tetsuji)
Audio-Technica Shell Keeper, commonly known as Tri-Capsule. 3 bottles can be stored with the headshell attached (Asaine Tomoho)
Accessories: none
Main specifications: W152 x H88 x D50 mm 120 g
LUXMAN's discrete premium line selector. You can select sources for up to 4 models. High-rigidity aluminum material is used for the housing, and 6N (99.99997% copper) wire with little information loss is used as the wiring material. The exterior is in good condition with no conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.6 continuity confirmed
Accessories: instruction manual
Main specifications: 6N copper wire, gold-plated internal wiring, 4 systems can be switched, W370 x H71 x D136 mm, 2.4 kg
Convenient digital needle pressure gauge. It is an excellent product that can measure up to 5g with a high accuracy of 0.01 g. (FUJISAWA KOSHI)
Maintenance information: 2024.5.6 operation confirmed
Accessories: No accessories
Main specifications: 5g dead weight
Cartridge case that can hold 2 bottles per shell with cartridges attached (model number unknown). The back case includes an overhang gauge and flathead screwdriver. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: screwdriver, overhang gauge
Main specifications: W130 x H100 x D50 mm 20.3 g (actual measurement)
Unspecified set of 7 insulators It is manufactured with materials thought to be pottery, but details are unknown. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: 78 mm in diameter, 22 mm in height, 283 g
※The power has been turned on, but since there are no connected devices, the details have not been checked. Dedicated linear power supplies for the company's D50s+A50, DX3 Pro, etc. Since it is an ultra-low noise design, the frame is also made of hard aluminum blocks and has a high texture. If you've been looking for one, please take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: instruction manual, power cord, connection cord, original box
Main specifications: power input 115V/230V (50/60Hz) W110×H52×D110mm 0.88kg
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
※It is inexpensive because there are stains and scratches. Set of 8 DIATONE wooden block ACOUSTIC CUBE DK-5000. The dense composite material has an attractive natural sound. It can be used in a variety of ways, from medium to large speakers. The exterior is stained, scratched, etc. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W90 x H90 x D90 mm, weight approx. 360 g/piece
Stereo magazine appendix. By plugging it into the USB terminal of a PC or USB-compatible DAC, etc., USB power supply/signal noise is cut and sound quality is improved (Satoshi Yonejima)
Maintenance information: 2024.5.5 operation confirmed
Accessories: No accessories
Main specifications: W20×H12×D59mm 13g
Set of 4 easy-to-install screw-on banana plugs. It is a high sound quality design with gold plating applied directly to beryllium copper. The exterior appears to be unused (Kobayashi Hitoshi)
Accessories: original box, 3 types of stickers
Set of 4 easy-to-install screw-on banana plugs. It is a high sound quality design with gold plating applied directly to beryllium copper. The exterior appears to be unused (Kobayashi Hitoshi)
Accessories: original box, 3 types of stickers
Mini plug to standard jack plug adapter Useful for connecting headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: original box
Set of 4 Technica cable terminator. OFC (oxygen-free copper) leads are used, making it convenient for terminal processing of thick speaker cables. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Set of 4 stainless steel spike holders It is also useful for improving sound quality by firmly grasping the spike-shaped legs. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: stainless steel, diameter 35 x height 5 mm, approx. 39.5 g
Unspecified spike receptacle set of 4 It is also heavy and well-built. Use it as a CD player or amplifier. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W55 x H5 mm 90.3 g (actual measurement)
Set of 4 unspecified metal type short pins The center pin is detachable and can also be used as an output terminal. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Set of 4 easy-to-install screw-on banana plugs. It is a high sound quality design with gold plating applied directly to beryllium copper. The exterior appears to be unused (Kobayashi Hitoshi)
Accessories: original box, 3 types of stickers
Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Unspecified spike receptacle set of 4 It is also heavy and well-built. Use it as a CD player or amplifier. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W55 x H5 mm 90.3 g (actual measurement)
Unspecified spike receptacle set of 4 It is also heavy and well-built. Use it as a CD player or amplifier. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W55 x H5 mm 90.3 g (actual measurement)
The disposal price has been reduced! (Member prices are not applicable) 2023/12/7 sales price 25,000 yen ※The dedicated earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. The exterior has line scratches and tape marks (Tamura Eiji)
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/12/7 sales price 25,000 yen ※The dedicated earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. The exterior has line scratches and tape marks (Tamura Eiji)
Accessories: No accessories
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
The disposal price has been reduced. Member prices are not applicable. 2024/4/22 sales price 6,000 yen SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm, height 7 mm, weight 47 g (actual measurement)
The disposal price has been reduced. 2024/4/22 sales price 6,000 yen SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto)
Accessories: none
Main specifications: diameter 35 mm, height 7 mm, weight 47 g (actual measurement)
A ceiling hanging bracket that can be used with BOSE's 100 series, etc. Comes with a safety wire to prevent falling. The installation surface can be rotated 360°, and it has one joint. There is a slight feeling of use such as dullness (Mizushima Itsuro)
Accessories: none
Main specifications: W100 x H170 (straight out) x D100 mm Speaker mounting part W85 x D40 mm (main body mounting screw pitch 60 mm)
Set of 4 Caldas jumper plates It is machined copper. There is an abrasion on the lug part (Murakoshi Yoichi)
Accessories: none
Main specifications: length from lug center to lug center: 37mm; lug inner diameter: 6mm
※It has a cigarette smell, so it's cheap. Set of 4 WOOD BLOCK INSULATOR MADE BY CORAL. It is built with a sense of stability and can be used with a wide range of speakers from medium to large. The exterior is dirty, scratched, etc. ※Felt is attached to the top plate (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W100×H190×D390mm 5.2 kg/bottle
PSE standard product. Recommended parts for those looking for a high quality slim connector. It is a neutral character with no quirks. There are abrasions ※ cord bushing is missing (Tomoho Asaine)
Accessories: none
Main specifications: maximum diameter standard 8.5 mm/maximum 13.0 mm (when cord bushing is removed)
※Cleaning solution is not included. VPI's classic vacuum record cleaner. Attach the record to the turntable, apply cleaner liquid, clean it with a brush, and then use a vacuum method to strongly suck fine dust and dirt that has entered the disc's groove. There is a dent in the corner
Maintenance information: 2024.5.3 operation confirmed (rotation, vacuum OK)
Accessories: instruction manual, power cable
Main specifications: W394 x H235 x D362 mm 12.7 kg
The company's SONICA DAC remote control unit*Please check the manufacturer's website for operating environments, etc. (https://www.oppodigital.jp/discontinued-product/sonica-dac/)(及川 Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. It's dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W300 x H45 x D125 mm approx. 540 g
A set of 4 small mini pottery blocks made by Noritake, famous for its high-grade tableware. Compared to TAOC, etc., the impression is that the sound is gentle. The exterior has stains like tape marks on one side, dullness, and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: 80 x 100 x 200 mm
The price has been reduced. 2024/4/29 sales price 45,000 yen Luxman high quality speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. The exterior has line scratches and tape marks on the bottom (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W450 x D500 x H40 mm approx. 7 kg
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. The exterior has scuffs, dullness, and a feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W51×H85×D51mm
The 2 shelves are missing and the dowels are missing and cannot be set. A horizontal AV rack designed with heat dissipation and wiring work in mind. Large TVs can be installed. Up to 6 amplifiers, devices, etc. can be stored. You can see the exterior, overall dullness, large abrasions, etc. (Kobayashi Hitoshi)
Accessories: 2 shelves (no missing dowels in the set)
Main specifications: W1202 x H732 x D582 mm load capacity/overall/top plate/shelf board/bottom plate 300/150/50/150 kg mass 83 kg
Jumper wire 18mm (High), 14mm (Low) pair end Y lug specification Caldas tri-wire jumper cable. The model number is unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 Continuity confirmed
Accessories: none
This is a 12 dB/oct passive type filter used when playing back SP records on an ELP laser turntable. Removes noise in the high and low frequencies of SP records. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 sound output confirmed
Accessories: instruction manual
Main specifications: cutoff frequency continuously variable low 300 Hz or less, high 2 kHz or more continuously variable W200 x H68 x D170 mm kg
Strong casters are used, making it convenient to move heavy equipment and large speakers. In addition to peeling veneer on the exterior and sides, a feeling of use can be seen such as dullness, scratches, and abrasions (Kobayashi Hitoshi)
Accessories: none
Main specifications: W626 x H126 x D570 mm 14 kg
The price has been reduced. 2024/4/29 sales price 9,000 yen. ※Unused item. *Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low frequencies clear, and accurate sound images can be obtained (Hiura Katsuji)
Accessories: original box
Main specifications: diameter 60 x height 45 mm weight 800 g/piece plate diameter 35 x height 5 mm weight 40 g/piece
The price has been reduced! 2024/4/27 sales price 29,800 yen Krypton speaker stand. It has a simple design, and a base containing iron ball sand with the same specifications as an audio board is used as the base. The size is ideal for small speakers, etc. There are small scratches on the exterior (Tamura Eiji)
Accessories: instruction manual
Main specifications: W249 x H620 x D325 mm top plate W200 x D260 mm weight 7.2 kg/unit
2 pcs per pair A convenient plug adapter for tight spaces or when you want to convert. There is oxidation on the exterior (Yonejima Satoshi)
Accessories: No accessories
Center spindle oil for TECHNICS SP-10MK2. Lubricating 2-3 drops once every 2000 hours is sufficiently effective (Asaine Tomoho)
Accessories: original box