We have drastically reduced prices! 2021/10/24 sales price 148,000 yen 2015 maintenance product. It is a large input type 2-way network used for ALTEC A5 etc. The high frequency attenuation attenuator can narrow the driver to -16dB by 10-stage switching of -2dB steps. Even if you narrow down to -4dB, such as the old network N-500-F, it is a must-see for those who are noisy at high frequencies. I think that the balance is good around -10dB (Yasuto Koshihama)
Maintenance information: 2015.11.2 Maintained (terminal cleaning. ATT (SW) cleaning Swap some resistors and adjust the deviation of the left and right sides. The capacitor is restored to the original capacitor that remained inside by removing the film-con that had been replaced. Input/output waveform and balance check, sound output check. Check the frequency characteristics measurement (~42 kHz) and confirm that the capacitor can be used as it is)
Accessories: None
Main specifications: 2 way network 2dB step/10 stage attenuator Allowable input 250W crossover 500 Hz impedance 16Ω Actual size W283 × H305 × D138mm Approx. 8kg
The price has been reduced! 2020/7/19 Sales price 75,000 yen Maintained! ALTEC's crossover frequency variable network. Grain and sound cuts are also a good impression. This network makes it easy to change horns and drivers. The appearance has dusts and scratches. The color of the printing on the top plate is different on the left and right. Serial 336145/336146 (Makoto Kono)
Maintenance information: 2020.7.19 Maintained (rear terminal screw and bridge rust removal (pickling) processing Front terminal orientation Corrected and increased deadline switching SW contact cleaning ATT disassemble contact Cleaning and contact grease application Frequency characteristic measurement check (~42 kHz) and continue using the original capacitor for good results input/output waveform and balance check sound output check)
Accessories: None
Main specifications: Crossover 500 Hz, 800 Hz, 1200 Hz can be switched with a jumper Banana plug input compatible W191 × H110 × D350 1.8 kg/book
We have cut the price! 2019/12/12 selling price 75,000 yen Replace the insulating bushing of the terminal part and refresh it! The sound grain is clear and the smoothness of the connection has been improved. It is a crossover 1200Hz network that is ideal for a combination of 38cm woofer+1" driver. The appearance has Kusumi, scratches, and a feeling of use. (Osamu Fukuzawa)
Maintenance information: 2019.12.12 operation confirmed
2015.6.15 Maintained (Terminal polishing, cleaning, insulation bushing & mounting screw replacement. ATT cleaning I/O waveform and balance check, sound output check. (Frequency characteristic measurement check)
Accessories: None
Main specifications: Crossover 1200Hz 8Ω 3-position switch with level control
I cut the price. 2020/12/6 Sales price 59,800 yen maintained! It is a network that does not have much stock. Please enjoy the original sound quality, like peeling off a dull veil. The main unit is connected for 604-8H and has a 2-way specification of 1500Hz. There is a screw chipping on the 02855 side. Serial 02855 03167 (Atsushi Takasaki)
Maintenance information: 2020.12.6 Maintenance completed (terminal cleaning, ATT disassembly contact cleaning, contact grease application, strengthening treatment of common wiring, one-side internal wiring error (manufacturer manufacturing failure Correct the frequency characteristic measurement check (~ 42kHz) and continue to use the original capacitor for good results, check input/output waveform and balance, check sound output)
Accessories: none
Main specifications: Impedance 8Ω Actual measurement W108 × H190 × D200 (excluding protrusions) mm Actual measurement 1.7kg
Rare It is a network that was sold for the high range of GAUSS CP-3820. It is possible to switch between 13kHz and 8kHz with internal wiring. (Yukishi Fujisawa)
Maintenance information: 2021.10.13 operation confirmed
Accessories: instruction manual, original box, 4 coils
Main specifications: crossover 13000Hz (8000Hz) 8Ω
TUNE BOX with module card for NINKA. If you have NINKA, please take this opportunity to step up to the active system. Since it is a NINKA specification, it is necessary to change the internal card when using other speakers. The appearance has a line wound on the top plate, there is a seal mark on the back (Shota Sasaki)
Maintenance information: 2021.9.24 operation confirmed
Accessories: power cable, connection cable
Main specifications: 2way specifications Size W320 × H75 × D265mm Weight 4 kg
price cut! 2020/1/25 selling price 5,000 yen*1 unit only. DN-6 is a 16-ohm type network DN-7. You can switch between 2way and 3way with a single switch. Appearance is dull and has small scratches (Jun Kanbayashi)
Maintenance information: 2019.1.25 Operation confirmed
Accessories: no accessories
Main specifications: 2way crossover 4000Hz 3way crossover 500Hz・4000Hz damping characteristics 12dB/Oct 16Ω Size W120 × H130 × D40mm Weight 0.7 kg
MAINTENANCE! Crossover 1,500Hz network ideal for middle-class 2-way systems. A must-have item for combination with LE14A and 175DLH or LE175 Extrusion of low frequencies and connections with high frequencies are also smooth. The appearance includes Kusumi and Rubbed. Serial 26982/29191 (MIURA Kimiya)
Maintenance Information: 2020.12.8 Maintained (Terminal rust removal pickling, cleaning, insulation bushing & mounting screws replacement. ATT Brand New Frequency characteristics measurement check (~42 kHz) and continue to use the original capacitor for good results. Input and output waveform and balance check, sound output check)
Accessories: no accessories
Main specifications: crossover frequency 1500Hz level control volume input impedance 8Ω
The price was reduced. 2020/7/25 Sales price 19,800 yen WHITELEY ELECTRICAL RADIO brand STENTORIAN's 2WAY crossover network. There is a feeling of use, dullness. (Atsushi Takasaki)
Maintenance Information: 2020.7.25 Conduction Confirmed
Accessories: original box (only one)
Main specifications: Impedance 15Ω crossover frequency 3,000 Hz Actual dimensions W110 × H60 × 70 mm Actual weight 170g/pcs
MAINTENANCE! Popular 500/800/1200Hz crossover frequency variable network. Just move the jumper pin to switch the frequency. It is useful when you want to try out horns and drivers in a variety of ways. The appearance has small scratches, but it is good for ages without noticeable scratches on the whole (Shota Sasaki)
Maintenance information: 2020.8.12 Maintained (rust removal (pickling) treatment of rear terminal screws and bridge plates. Correct the orientation of the front terminal and tighten it. Switchable SW contact cleaning ATT disassembly and contact cleaning and contact grease application Frequency characteristics measurement check (~42 kHz) and continue to use the original capacitor for good results. Input and output waveform and balance check, sound output check.)
Accessories: none
Main specifications: Crossover 500Hz, 800Hz, 1200 Hz switching by jumper impedance 8Ω banana plug input compatible W191 × H110 × D350 1.8 kg/book
MAINTENANCE! Crossover 7000Hz, the best network for tweeters such as 075-077. Please enjoy using it according to your application such as 2way or 3way. serial 16606/19300
Maintenance information: 2020.6.4 Maintenance carried out (terminal rust removal pickling, cleaning, insulation bushings & mounting screws replacement, ATT brand new replacement. Continued use of the original capacitor for good results by measuring frequency characteristics ~ approx. 42kHz, input and output waveform and balance check, sound output check)
Accessories: none
Main specifications: Variable level control crossover frequency 7kHz 8Ω Weight 900g
※ Current sale item. Network for super tooater. It is a high-pass filter developed for PIONEER's PT-R9. It is a network that goes well with the company's Ribbon Teater and makes high frequencies sound refreshing. There is a feeling of use because of the stabiness of paint deterioration due to aging. (Yoichi Murakoshi)
Maintenance information: 2021.6.26 sound confirmed
Accessories: none
Main specifications: High pass filter impedance 8Ω cutoff frequency 20kHz attenuation 12dB dimension W127 × H30 × D65 mm Weight 145g
Lower price (2020/10/14 sales price 24,800 yen) *Inexpensive because of the current selling goods and terminals somewhat difficult. 3WAY crossover network made exclusively for the company horn scoker unit MIDAX950. It was used during the 3WAY specification of AXIOM301. The right end of the TREBLE terminal screw on one side is empty just before tightening, but it can be fixed. There is a feeling of use.
Maintenance information: 2020.10.14 sound confirmed
Accessories: none
Main specifications: 15Ω crossover frequency 950Hz/5000Hz W167 × H105 × D105mm 1.5kg/pcs
Crossover Network 8Ω Crossover 8KHz Continuous Variable Level Control Ideal for combination with JBL LE175, LE85/075, 077 The appearance has a feeling of use over time, there are paint peeling etc. Cereal 1437/2032 (Sasaki Shota)
Maintenance information: 2017.7.5 Maintenanced (terminal rust removal, cleaning, screw washer replacement. ATT replacement. Input/output waveform, balance check, sound output check. (Capacitors are used as original for good results of frequency characteristics measurement check)
Accessories: None
Main Specifications: Variable Level Control Crossover Frequency 8KHz 8Ω Weight 0.9kg
I cut the price! 2020/7/19 Selling price 75,000 yen Maintenance! ALTEC crossover frequency variable network. The grain and the cut of the sound are also a good impression. This network makes it easy for you to switch horns and drivers in a variety of ways. Appearance, there are Kusumi and Rubbed scratches. Serial K340599/K340611 (Makoto Kono)
Maintenance information: 2020.7.19 Maintenance (rust removal (pickling) treatment of rear terminal screw and bridge plate orientation correction and increase deadline switching SW contact cleaning ATT disassemble contact Cleaning and contact grease application frequency characteristics measurement check (~ approx. 42kHz) to continue using original capacitors for good results input/output waveform and balance check sound output check)
Accessories: None
Main Specifications: Crossover 500Hz, 800Hz, 1200Hz with jumper switching banana plug input compatible W191 × H110 × D350 1.8 kg/book
Under price (2020/10/5 selling price 75,000 yen) Maintained. Popular crossover 500Hz Please use it for JBL2440/2441 drivers. There is a sense of extrusion and grain, and the connection to the high range is also natural. You can enjoy the low range with elongation and the high zone with tension. It is essential to build a large system centered on a 38cm unit. Missing mounting screw hole Serial 11746/11748 (Itsuro Mizushima)
Maintenance Information: 2019.12.5 Maintenanced (terminal rust removal, cleaning, insulation bushing & mounting screw replacement. SW ATT contact cleaning Frequency-characteristic measurement check is performed and the original capacitor is continuously used for good results. (Input and output waveform, balance check, sound output check)
Accessories: None
Main Specifications: Crossover 500Hz Network Impedance 12-16Ω High Range Level Control 6/8/10 dB W121 × H153 × D130mm 1.9 kg
Maintened! Crossover frequency 7 kHz network. Ideal for MID/HIGH for 3WAY systems using 2440. There are dullness corresponding to the year, small wounds (Tetsuji Oikawa)
Maintenance Information: 2019.3.29 Maintenanced (terminal rust removal, cleaning, insulation bushing & mounting screw replacement. ATT replacement. Frequency-characteristic measurement check (~42kHz) is performed and the original capacitor is continuously used for good results. (Input and output waveform, balance check, sound output check)
Accessories: None
Main Specifications: Crossover Frequency 7kHz Allowable Input (Continuous Program) 50W Impedance Bass: 12 to 16Ω Treble Attenation/Variable Volume Mounting Hole W140 × 108mm 0.7kg
Crossover 7000Hz, perfect network for tweeters like 075 and 077! Please enjoy using it according to your application such as 2way or 3way. Appearance, there is a feeling of use and small scratches. Serial 32890/32962 (Kimiya Miura)
Maintenance information: 2019.11.23 Maintenance (terminal rust removal cleaning insulation bushing & mounting screw replacement ATT new replacement frequency characteristics measurement check (~ about 42kHz) (Continued use of original capacitor for good)
Accessories: No accessories
Main Specifications: Variable Level Control Crossover Frequency 7KHz 8Ω Weight 900g
Crossover frequency 7 kHz network. Ideal for MID/HIGH for 3WAY systems using 2440. There are small wounds, Kusumi (Tetsuji Oikawa)
Maintenance Information: 2019.2.12 Maintenanced (terminal rust cleaning, insulation bushing & mounting screw replacement. ATT replacement. Frequency-characteristic measurement check (~42kHz) is performed and the original capacitor is continuously used for good results. (Input and output waveform, balance check, sound output check)
Accessories: None
Main Specifications: Crossover Frequency 7kHz Allowable Input (Continuous Program) 50W Impedance Bass: 12 to 16Ω Treble Attenation/Variable Volume Mounting Hole W140 × 108mm 0.7kg
We cut the price (2021.1.14 sales price 59,800 yen) Vitavox 500Hz network. Perhaps it is the same specification as the 500Hz network CN458 adopted in the late CN191. It is rare because it rarely comes out on its own. There is a feeling of use such as dirt. (Takasaki Takasaki)
Maintenance Information: 2021.1.14 sound out confirmed
Accessories: wiring diagram
Main specifications: Approx. W237 (base 277) x H63 (excluding protrusions) x D170 (base 182) mm approx. 2.6 kg/pcs
※Only 1 Rare signature type. It has been maintained in 2019. Crossover 1200Hz 38cm woofer plus 1 inch driver is the perfect network We have minimal maintenance such as attenuator cleaning to make use of the original (Tetsuji Oikawa)
Maintenance Information: 2019.4.1 Maintenance (rust removal, cleaning and tightening of terminals and mounting screws. SW ATT contact cleaning Frequency-characteristic measurement check is performed and the original capacitor is continuously used for good results. (Input and output waveform, balance check, sound output check)
Accessories: None
Main Specifications: Crossover 1200Hz 16Ω 3-Position Switch Level Control
2Way8000Hz network for high range. It can also be used in combination with JBL 075, 077, or when combining full range and tweeters. Appearance has a feeling of use, Slight Scratch. Serial 2410/2537 (Osamu Fukuzawa)
Maintenance Information: 2019.8.30 Maintenanced (terminal rust removal, cleaning. Insulation bushing & mounting screw replacement. ATT Brand New Replacement Frequency-characteristic measurement check is performed and the original capacitor is continuously used for good results. (Input and output waveform, balance check, sound output check)
Accessories: None
Main Specifications: 2way Crossover 8,000 Hz Impedance 8Ω Continuous Variable Level Control Weight 0.9kg