Input/output balance terminal volume controller from SPL (German recording professional equipment manufacturer). By designing an active circuit, it is possible to avoid a decrease in linearity due to changes in impedance that occur in passive circuits. The volume is continuously variable, and there is almost no imbalance between left and right, and it expresses a high level of sound quality. The exterior is dull, and there is a feeling of use such as small scratches. Serial 7020595 (Asaina Satoshi method)
Maintenance information: 2023.9.29 Operation confirmed
Accessories: power cable
Main specifications: XLR input/output 1 line W215 x H80 x D220 mm 1.6 kg
Disposal price reduction. 2023/9/28 sales price 10,000 yen ※There is no problem with operation, but it is currently sold because it is cheap. Behringer's classic line mixer. Equipped with 16 inputs in a compact 1U housing, it can be used as a multi-purpose line mixer (Daiki Goto)
Maintenance information: 2023.9.28 Operation confirmed
Accessories: original box, instruction manual, power cable
Main specifications: W483 x H44.5 x D217 mm weight 2.3 kg
Headphone amplifier with built-in Class A operation amplifier. The high power MOS-FET is used for the output stage, and the texture in the mid to high range is excellent. The front panel, which is made of ebony and has a heavy feel, is also excellent. A high-quality headphone amplifier with excellent transparency and dynamic range. As for the exterior, there are small scratches on the top plate. Serial No. 000871 (Yonejima Satoshi)
Maintenance information: 2023.9.28 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: Class A 1200 mW+1200 mW (32 Ω) Frequency characteristics 5 to 200 kHz H93 x W270 x D240 mm 5 kg
Authorized Electri Imported Product It's a beautiful item! It is a line level signal converter that converts a +4 dB balance signal into a -10 dB unbalanced signal from a consumer device. The input/output of each channel seems to be highly reliable, such as being insulated by mounting a Jensen JT-11-YMPC transformer to prevent noise from the ground loop. Recommended when inputting balance signals into consumer devices (Kobayashi Hitoshi)
Maintenance information: 2023.9.26 Operation confirmed
Accessories: instruction manual, original box
Main Specifications: 20 Hz to 20 kHz (+0 dB/-1.5 dB) Dynamic Range 130 dB Input Impedance 1.3 KΩ Output Impedance 520 Ω W84 x H48 x D127 mm 0.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/9/25 sales price 79,800 yen This is a basic model in LINN's DS player series. Since it has a built-in 20W+20W amplifier, it can also be directly connected to a speaker for playback. Like an internet radio receiver, it can also be connected to a preamp using a digital out for high definition transport, and an analog output. There is a feeling of use such as scuffs, paint deterioration, and dullness on the exterior and top plate (Kobayashi Hitoshi)
Maintenance information: 2023.9.22 operation confirmed
Accessories: speaker terminal connector, power cable
Main specifications: Compatible format WAV FLAC MP3 input ETHERNET output TOS1 system COX1 system analog RCA1 system compatible sampling frequency and number of bits 7.35k to 192 kHz 16, 24 bit power amplifier output 20W+20W W345 × H44.5 × D274 mm 2.7 kg
The price has been reduced! 2023/9/22 Sales price 54,800 yen Maintenance completed! Comes with a wood cabinet. A pretty rare Macintosh equalizer. It can be adjusted by dividing it into 3 divisions: LOW, MID, and HIGH. In particular, the LOW position can be controlled independently on the left and right. As for the exterior, there are scratches and small scratches on the cabinet. Serial 2V814 (Yonejima Satoshi)
Maintenance Information: 2023.9.22 Maintained (RCA jack replaced. Lamp replacement. rivet replacement. Felt attachment Switch cleaning. Rust removal Frequency characteristics check. (Check each input/output)
Accessories: copy of instruction manual (English)
Main specifications: 117 V specification, 3 band split, Environmental Equalizer, LOW 5 stage, MID5 stage, HIGH 5 stage, W405 ✕ H78 ✕ D245 mm, weight 2.7 kg
The price has been drastically reduced! This is a headphone amplifier with a sales price of 29,800 yen for 2023/9/20 STAX. The straightforward tone lets you hear the fine nuances of the vocals, making it ideal for late-night monitoring. The exterior is dirty and scratched. Serial A5318 (Kimiya Miura)
Maintenance Information: 2023.9.20 Maintained (volume cleaning treatment. Additional soldering treatment & internal cleaning treatment of amplifier circuits and power supply circuits. (Check the amplifier circuit, adjust the balance, and adjust the offset)
Accessories: no accessories
Main specifications: SRM-1 solid state output 2 lines W150 x H87 x D370 mm 2.0 kg
※We have confirmed the 2.1 channel sound output, but since no others have been checked, it is currently for sale. This is the AV amplifier section with built-in subwoofer for Yamaha's home theater package, YHT-S350 (Daiki Goto)
Maintenance information: 2023.9.18 Operation confirmed
Accessories: remote control, instruction manual, FM antenna
Main specifications: 3 HDMI systems, 2 audio systems (analog x 1, optical digital x 1) [amplifier section] practical maximum output 200W (50W x 2+100W) [center unit/SR-S350] W435W x H151 x D361mm 8.6kg
Disposal prices have been reduced. Member discounts will not be applied. 2023/9/18 sales price 49,800 yen ※ The sound output has been confirmed, this is currently the item for sale. Sony wireless speaker You can enjoy streaming services that offer 360 Reality Audio using Google Home or the Music Center app. It also supports wireless playback with analog input (audio cable terminal) Bluetooth. The appearance is good in terms of dullness (Kobayashi Hitoshi)
Maintenance information: 2023.9.17 sound output confirmed
Accessories: instruction manual copy, power cord
Main specifications: approx. Φ46 mm tweeter+46 mm mid-range speaker x 3, approx. Ø70 mm subwoofer x 1, S-Master HX Bluetooth standard Ver. 4.2, maximum communication distance approx. 30 m, W235 x H329 x D225 mm, approx. 4.9 kg
The price has been reduced. 2023/9/16 sales price 99,800 yen, earpads replaced by the manufacturer, driver unit maintained! This is a high quality system that combines the SR-407 ear speaker, which uses the same sounding body as the SR-507, and the SRM-006ts driver unit, which employs a vacuum tube as the output stage. Music is delicately reproduced with silky luster and smoothness with a synergistic effect of high frequency smoothness unique to vacuum tube driver amplifiers with high resolution and detailed sound quality typical of condenser type speakers (Fujisawa Yukishi)
Maintenance Information: 2023.9.16 Manufacturer Maintained (SR-407:
The ear pads (replacement black), head pad (replacement black), and S filter in the rear cover have been replaced due to aging. Other comprehensive checks after repairs. SRM-006ts: The power supply electrolytic capacitor deteriorated over time, and the fuse resistor was broken. The large and small power supply electrolytic capacitors, resistors, and vacuum tubes have been replaced due to aging. (Comprehensive check of others after repair)
Accessories: power cord
Main Specifications: [SR-407] Frequency Characteristics 7 Hz to 41 kHz Sensitivity 101 dB/100 V r.m.s. Impedance 144 kHz/10 kHz Cable Length 2.5 m Weight 340 g excluding cable [SRM-006ts] Playback Frequency Characteristics DC to 80 kHz/+0, -3 dB Rated Input Levels: 100 mV/100 V Output Maximum Input Level 30 V/Volume Minimum ■ Amplification 60 dB (1,000 dB) Double) Input impedance 50 kΩ (RCA input) /100 kΩ (XLR input) Power consumption 49 W size W195 x H380 x D103 mm Weight 3.40 kg
SFP media converter. Convert the SFP to a regular LAN (RJ45). The power supply is 9V (Yasuhito Koshihama)
Maintenance information: 2023.9.16 Operation confirmed
Accessories: original box, power adapter
SFP media converter. Comes in a heavy Nagao Seisakusho case. Serial OLMC-A010052 (Yasuhito Koshihama)
Maintenance information: 2023.9.16 Operation confirmed
Accessories: original box, adapter
SFP media converter. Comes in a heavy Nagaoka Seisakusho case. Serial OLMC-A010082 (Yasuhito Koshihama)
Maintenance information: 2023.9.16 Operation confirmed
Accessories: original box, adapter
It's been a while since it arrived! Lin isolation line transformer. Equipped with a high quality line transformer from Rundahl. It is a high quality transformer that has been overwhelmingly praised by audiophiles, such as being mounted on the KLIMAX DS. There is little deterioration in sound quality, and it plays the essence of the sound. There are no noticeable scratches and it is fine (Fujisawa Yukishi)
Maintenance information: 2023.9.13 Operation confirmed
Accessories: none
Main specifications: isolation line transformer size W191 x H53 x D205 mm weight 1.0 kg
The price has been reduced. 2023/9/11 sales price 108,000 yen Roon Ready, a network player compatible with MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips, AK4497, which are now rare, you can enjoy a full range of high-resolution sound sources. When used as a USB DAC, it also reproduces DSD22.5 MHz. Since it also has volume, it can also be used as a digital preamp. There is an appearance, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.8 Operation confirmed
Accessories: power cable remote control
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768 kHz DSD2.8/5.6/11.2/22.5 MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384 kHz DSD2.8/5.6 MHz) Compatible formats (FLAC, Apple LossLess, WAV, AIFF, MQA) W290 × H81.2 × 248.7 mm 3.9 kg
ZEN UPGRADE product. It is a Bluetooth 5.0 (bluetooth) receiver. Connect to your own audio device and use it. It is all compatible with Qualcomm's aptX and aptX HD, aptX Low Latency, aptX Adaptive, LDAC (Sony's Hi-Res Bluetooth codec), HWA/LHDC (Huawei's Hi-Res Bluetooth codec), AAC (format preferred by Apple), and SBC (standard Bluetooth codec). The required DAC chip is equipped with an ESS Sabre DAC chip. You can enjoy a bright, crisp sound (Ryo Mizusaki)
Maintenance information: 2023.9.9 sound output confirmed
Accessories: instruction manual, power cord, RCA cable, antenna, original box
Main specifications: Bluetooth 5.0 (aptX, aptX HD, aptX Adaptive, aptX LL, LDAC, HWA/LHDC, AAC, SBC codec) W158 × H35 × D100mm 476 g
※There are cracks on the dials in several places, but the current situation is. Since it is a non-AC adapter non-A/D converter that is compatible with active operation of a 6-channel stereo mixer, signal deterioration is also minimal. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.8.14 Operation confirmed (there are some differences on the dials)
Accessories: original box, instruction manual
Main specifications: W280 x H55 x D145 mm 1.0 kg
The price has been drastically reduced. 2023/9/4 sales price 2,500 yen. This is a compact D/D converter product powered by a USB connected bus that is compatible with high-resolution sound sources. It is equipped with 2 SPDIF outputs, COAXIAL (coaxial cable connection) and OPTICAL (optical cable connection), and can be used for the purpose of adding digital output terminals to devices without digital audio output, such as laptops and tablets. There is a slight feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2023.9.31 Operation confirmed
Accessories: none
Main Specifications: Digital Input: USB TypeB Terminal USB 1.1/2.0 Compatible USB Audio Class 1.0 Digital Output: Coaxial Digital Audio Output (COAXIAL) Optical Digital Audio Input (Square) Compatible Formats: PCM Maximum 24 bit/96 kHz Audio Controller IC: Savitech BRAVO “SA9023” (USB-DDC)
Compatible OS: Windows 10/8 & 7/Vista/XP/2000 macOS X/9.1 or later H25 × W40 × D81 mm (excluding protrusions) Weight 94 g
Comes with an optional filter (SC-SS). It is a sound quality improvement adapter unit that minimizes inherent distortion caused by device interaction by connecting between the amplifier and speaker of the audio system. The exterior has scuffs and line scratches. Serial 0101468/0101469 (Tamura Eiji)
Maintenance information: 2023.9.1 Operation confirmed
Accessories: no accessories
Main specifications: W114 x H46 x D186 mm approx. 1 kg
It's an ear speaker and driver unit system. These STAX ear speakers have a reputation for their outstanding subtlety unique to the condenser type. The fine nuances of vocals are clearly audible, making it ideal for late-night monitoring. As for the exterior, the ear pads have been replaced, but there are peeling off and the adhesive sticking out. There is crease in the head pad (Katsutsugu Hiura)
Maintenance information:2023.8.29 sound output confirmed
Accessories: power cable SR-λ original box
Main specifications: SRM-1 solid state output 2 lines W150 x H87 x D370 mm 2.0 kg SR-λ electrostatic type 8 to 35,000 Hz 102 dB cord length 2.5 m
Technica headphone amplifier It is a must-have for a new generation of audio, and its high signal-to-noise ratio shines through. The growth in the low frequencies, which betrays expectations in a good sense, is also excellent. You can enjoy the delicate and dynamic headphone sound that is different from speakers. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2023.8.29 sound output confirmed
Accessories: AC adapter, original box
Main specifications: maximum output level 300 mW+300 mW, frequency characteristics 10 to 100 kHz, signal-to-noise ratio 108 db or more, input terminal, RCA output 3.5 mm, stereo mini jack 6.3 mm, RCA W105 x H44 x D142 mm, weight 465g
A passive attenuator with a selector that can switch 20 high sound quality resistors made by American PRP per channel with a 21-contact rotary switch. The selector switch is a special model that uses 8 circuits and 5 contacts and completely separates ground. There are no noticeable scratches on the exterior (Miura Kimiya)
Maintenance information: 2023.8.30 Operation confirmed
Accessories: no accessories
Main specifications: 20 kΩ specification input systems with approx. 2 dB steps (RCA x 3, XLR x 2 systems) W200 ✕ H50 ✕ D200 mm, weight 1.05 kg
Disposal prices have been reduced! (Member discount does not apply) 2023/8/24 sales price 158,000 yen LUXMAN's high-end headphone amplifier. Compatible with balanced headphones, it is equipped with 2 systems for balanced output via BTL connection at the rear and 1 system at the front. Equipped with a solid-state electronically controlled attenuator. The exterior has a feeling of use such as dullness and small scratches. Serial M60400932B (Takahashi Nobuyuki)
Maintenance information: 2023.8.24 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: input unbalance 1 system balance 2 system output balance 1 system 6.3 mm standard jack 2 system through output 1 system SN-ratio unbalance 110 db balance 115 db W440 x H92 x D400 mm 12.7 kg
Disposal prices have been reduced. Member discounts are not applicable. 2023/8/23 sales price 118,000 yen high accuracy master clock generator. Although it is a crystal oscillator, it has been tuned with high accuracy, so the sense of localization and good sense of sound field have been improved step by step. For those aiming for higher sound quality, you can also enjoy connecting to a rubidium oscillator etc. from an external input. Serial 0210016 (Takasaki Atsushi)
Maintenance information: 2023.8.23 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: master clock generator frequency 44.1 (48) /88.2 (96) /176.4 (192) 100kHz W442 × H97 × D353 mm 9.1 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/8/22 Sales price 69,800 yen*Currently sold. D/A A/D audio interface equipped with a USB 2.0 high-speed bus optimized to achieve uncompromising high performance on Windows and macOS. All settings can be changed in real time. A product that has achieved professional specs that were impossible with a typical USB audio interface (Asaine Satoshi method)
Maintenance information: 2023.8.22 Confirm sound output on Windows*Due to the nature of the product, we are unable to explain operations and features related to the product and usage.
Accessories: power cord
Main specifications: Total input/output 24 bits/192 kHz USB 2.0 terminal x 1 analog input analog line input x 6 · high end microphone pre/line input x 2 analog output analog line output x 8 digital input ADAT input x 1 · SPDIF coaxial input x 1 size W265 x H44 x D165 mm weight 1.5 kg ※ Please check the manufacturer's website for detailed specifications.
※Simple tests are OK, but since they are inexpensive, they are currently sold. Comes with a case. 16 channel stereo powered mixer In addition to an 8-mono, 4-stereo 16-channel configuration, the input is equipped with 1AUX and CD/TAPE inputs. As for the output, in addition to the LR speaker output, it is equipped with a mono output, 2 monitor sends, an amplifier insert, and a CD/TAPE output, and incorporates an 800W (4Ω) x 2 Class D high performance power amplifier. The exterior is dirty and has small scratches. There are many entries in the manual (Tetsuji Oikawa)
Maintenance information: 2023.8.22 Operation confirmed
Accessories: instruction manual, power cable, case
Main specifications: W475 x D450 x H115 mm, weight 10.5 kg (actual measurement, not including case)
※Since it is cheap, it is currently sold. This is a classic Technics DJ mixer. The crossfader uses an optical cross system, so it is highly durable and can handle heavy play such as scratching. There is a feeling of use such as appearance, abrasion, dullness, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.8.20 Simple sound output confirmed
Accessories: power cord, original box
Main specifications: input/LINE input 3 systems, PHONO input 2 systems, MIC input x 1 output/LINE, MONITOR/REC output, 1 system, PHONES input x 1 system, 1 W260 x H102 x D305mm 3.5 kg
Sony's 9-band graphic equalizer. It is one that features a hybrid echo, and can give a sense of realism to various sound sources. Why don't you use the SEH-310 to create your own unique sound? There is a feeling of use such as acupressure (Daiki Goto)
Maintenance information: 2023.8.22 Operation confirmed
Accessories: none
Main specifications: W430 x H55 x D295mm 3.5 kg
*Currently sold. Victor's audio mixer. There are 12 mono microphone inputs and 4 stereo line inputs. The microphone input and line input are divided into separate faders, so there is also an ingenuity that makes it easy to balance the whole thing, so it is an easy-to-use mixer without any strangely cluttered functions. There are wounds, dullness, etc. (Tetsuji Oikawa)
Maintenance information: 2023.8.22 Operation confirmed
Accessories: front cover
Main specifications: W482 x H182 x D233 mm 7 kg
The price has been drastically reduced. 2023/8/20 sales price around 858,000 yen is good! A top grade model equipped with a DSD-compatible Katalyst DAC+ amplifier! The external input is compatible with MM/MC, Ethernet, HDMI, TOSLINK, SPDIF, and USB in addition to RCA, and allows you to listen to a quiet and fast responsive sound with a 100W x 2 (4Ω) Class D amplifier (Fujisawa Yukishi)
Maintenance information: 2023.8.20 Operation confirmed
Accessories: remote control, power cord, original box
Main specifications: Katalyst DAC+ amplifier model 100W x 2 (4Ω) 24 bit PCM192 kHz/DSD supports file playback up to 5.6 MHz W335 x H113 x D335 mm Weight 8.1 kg
Disposal prices have been reduced. 2023/8/20 sales price 498,000 yen Adopts the same high-performance FPGA “Xilinx XC7A200T” as the company's Blu Mk2. It is equipped with an upscaling algorithm called an “M scaler.” It is an upscaler capable of upsampling various sources up to 768 kHz. Serial 43306 (Takasaki Atsushi)
Maintenance information: 2023.8.19 Operation confirmed
Accessories: remote control, manual, power cord, optical cable, BNC cable x 2
Main specifications: digital input/USB1 system, BNC2 system, Toslink 2 system, dual BNC output 44.1 to 768 kHz single BNC output 44.1 to 192 kHz W235 x H40.5 x D236 mm 2.55 kg
The spec Diretta USB Target Bridge is in stock for the first time. It is equipped with the communication protocol “Diretta,” which realizes high sound quality transmission via a LAN network. High sound quality is achieved by stabilizing the load on the receiver side with the sending side of the sound source as the “host” and the receiver side as the “target,” and a large sound quality improvement effect can be obtained when reproducing a high-resolution sound source with a USB-DAC. Good appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2023.8.19 Storefront operation confirmed (Diretta Host output from Diretta ASIO Driver on Windows, confirmed sound output with USB output to Chord DAVE by connecting RMP-UB1 to Target)
Accessories: manual, power cord, connection cord
Main specifications: terminal USB-A x 1, LAN (RJ45) output terminal USB-A x 2 W350 x H95 x D164 mm 3.8 kg
The price has been reduced. 2023/8/20 Sales price 69,800 yen*Parallel imported product. Transrotor's next generation turntable power supply unit. All aluminum housing body. The power supply can be finely adjusted according to the speed of rotation (33, 45 rpm), as well as each supply. Compared to the original power supply, the texture and sound realism of the low frequencies are improved. The appearance, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2023.8.16 Operation confirmed
Accessories: power cord
Main specifications: W176 x H75 x D170 mm 5 kg for 1 motor
Technics's current network CD receiver, Hi-Fi, is in stock for the first time! A masterpiece packed with an amplifier, CD player, and network player even though it's small. Not only can you play PCM192 kHz or DSD 5.6 MHz high resolution playback that is higher than the sound quality of a CD from your NAS or USB memory, etc., but it is also a very cost-effective unit that can do many things such as MQA, Bluetooth, PHONO, FM radio, etc. Also, not only the functionality and sound quality, but also the high-quality design are attractive. There are no noticeable scratches and it is fine (Sasaki Shota)
Maintenance information: 2023.8.18 Operation confirmed
Accessories: original box, remote control, power cable, manual
Main specifications: Renewable disc CD, CD-R, CD-RW sampling frequency PCM maximum 192 kHz DSD 5.6 MHz output 60 W+60 W W340 x H94 x D341 mm 4.8 kg
A converter that converts a digital signal clock into a clock with high accuracy. East Japan specification (40kHz). The radio waves of the radio clock are received and used as a clock source to remove fluctuations in the digital signal and improve the sound quality of the digital signal. The sound quality changes clearly and more mellow. There are light threads on the exterior. Serial 906051 (Kimiya Miura)
Maintenance information: 2023.8.17 Operation confirmed
Accessories: instruction manual, power cord, receiver
Main specifications: digital input AES/EBU (XLR) SPDIF (RCA) SPDIF (BNC) 1 system each, digital output AES/EBU (XLR) SPDIF (RCA) SPDIF (RCA) SPDIF (BNC) 1 system each independent simultaneous output dimensions W483 x H95 x D275 mm weight 5.0 kg
It's a dream Roon server where you can use Diretta directly on Roon. The latest version of Music Arch (Linux) has been installed. Equipped with an M.2 SSD 250GB x 1 for booting and 16GB x 1 memory. Equipped with a 10th generation Core i7 with 6 cores and 12 threads, it provides a comfortable, high-quality Roon core. HQPlayer embedded is also pre-installed, so you can test run for 30 minutes. Long-term use is also possible if you buy a license (Yasuhito Koshihama)
Maintenance information: 2023.8.16 Storefront operation confirmed
Accessories: power adapter, with original box
Main specifications: Equipped with a 10th generation CPU Core i7-10710U
Marantz HDMI selector. Equipped with 2 HDMI terminals and 6 input systems, it is possible to watch 2 types of display devices, such as flat screen TVs and projectors, without replacing cables. The exterior has noticeable white scratches on the top plate (Mizusaki Ryo)
Maintenance information: 2023.8.15 Electricity confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: W438 x H75 x D337 mm 3.2 kg
Enhancer module for Cello. It is compatible with OTA-3 modules mounted on Cello Suite P-201, R-DAC, etc. There is no doubt that you will be amazed at the size of the space, the high resolution, and the luscious texture that you can tell just by listening. The autographs of the late Tom Colangelo are eye-catching (Sasaki Shota)
Maintenance information: 2023.8.13 Storefront operation confirmed (operation confirmed by Cello R-DAC)
Accessories: none
Enhancer module for Cello. It is compatible with OTA-3 modules mounted on Cello Suite P-201, R-DAC, etc. There is no doubt that you will be amazed at the size of the space, the high resolution, and the luscious texture that you can tell just by listening. The autographs of the late Tom Colangelo are eye-catching (Sasaki Shota)
Maintenance information: 2023.8.13 Storefront operation confirmed (operation confirmed by Cello R-DAC)
Accessories: none
Denon sound bar. This is a set with a wireless subwoofer where you don't have to worry about where to put it. The sound of the speakers built into the TV can be greatly upgraded. Since it can be built inexpensively, it is also perfect for subsystems such as bedrooms (Sasaki Shota)
Maintenance Information: 2023.8.13 Operation confirmed
Accessories: remote control, power cable
Main specifications: 2ch sound bar+wireless subwoofer sound bar W900 x H54 x D83 mm 1.8 kg woofer W171 x H342 x D318 mm 5.2 kg
The price has been reduced. 2023/8/13 sales price 25,000 yen A high-resolution USB-DAC/ADC capable of DSD recording with a professional-quality AD converter and archiving of analog records using phono input. For both recording and playback, it is a USB/DAC that is compatible with formats of 5.6 MHz and 2.8 MHz for DSD and up to 192 kHz/24 bit for PCM, and can record sources on hand with DSD. The exterior is dull and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.8.13 Operation confirmed
Accessories: connection cord
Main specifications: number of channels · 2 channel input format (USB) DSD · 2.8224 MHz/5.6448 MHz, 1 bit, PCM · 44.1 kHz/48 kHz/88.2 kHz/96 kHz/176.4 kHz/192 kHz, 16 bit/24 bit W155 ✕ H49 ✕ D184 mm 1.1 kg
The price has been drastically reduced! 2023/8/12 sales price 89,800 yen 2TB equipped model. A high-resolution NAS designed as a dedicated audio device. You can use it as a digital music library that opens up the high-resolution era. It is also equipped with a USB terminal on the front, and can also be used as a network transport due to the USB-DAC connection function. The exterior is dull and has small scratches. Serial 40191850700001 (Yonejima Satoshi)
Maintenance information: 2023.8.12 Operation confirmed (firmware 3.93)
Accessories: power cable, instruction manual, connection cord
Main Specifications: Support Files DSF, DFF, FLAC, ALAC, AIFF, AAC, MP3, WMA, OGG, LPCM Sampling Frequency 44.1K, 48K, 88.2K, 96K, 176K, 192K, 2.8M, 5.6M, 11.2 Drive with 2 3.5-inch HDD 1TB W436 x H70 x D352 mm 7 kg
Disposal prices have been reduced! (Member discount will not apply) 2023/8/12 sales price 99,800 yen A black model that was upgraded to the DELA N1A/N1Z, which was announced and sold as the industry's first “audio NAS,” and improved marketability. Equipped with a dedicated terminal for USB-DAC connection, the rear design has been renewed. In addition to being equipped with a 60W high-capacity power supply unit, a newly developed high-capacity capacitor bank is mounted on the rear stage of the power supply unit. The newly selected 3.5-inch quiet drive is mounted floating with a silicon bush, improving sound quality. The exterior is dull. Serial 40300170200698 (Yonejima Satoshi)
Maintenance information: 2023.8.12 operation confirmed (firmware 3.93)
Accessories: instruction manual, power cable, connection cable, original box
Main specifications: storage capacity 2 TB (2 TB HDD x 1) input/output terminal USB 3.0 x 3 (capture, capacity expansion, backup) USB 2.0 x 1 (for USB-DAC connection) RJ45 x 2 (router connection/network player) compatible file format WAV, AIFF, FLAC, DSF, DFF, sample frequency 44.1/88.2/176.4/352.8/48/96/192/384 kHz (PCM) 2.8 /5.6/11.3 MHz (DSD) compatible number of bits 16 to 32 bits (PCM) W436 x H70 x D352 mm weight 7 kg
The price has been reduced! 2023/8/11 sales price 6,000 yen tube headphone amplifier compatible with headphones of various impedances Please try the sound of that tube amplifier made for watching with headphones. The exterior has a feeling of wear such as dullness. Serial 24070012 (Asaine Tomonori)
Maintenance Information: 2023.8.11 Operation confirmed
Accessories: none
Main Specifications: 12AU7 x 2 Headphone Terminal: Standard Jack/Rear Mini Jack with Impedance Switch W130 x H170 x D230 mm 3.4 kg