Maintained! MC boost transformer optimized for SPU. The sound creation that is only slightly distorted with a small transformer embodies superb music playback by connecting the SPU. There are scratches, dirt, and tape marks on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.22 maintenance (terminal adhesive fixed wiring repair, voice check)
Accessories: original box
Main specifications: input impedance 2 ohms to 3 ohms boost ratio 60 times weight 70 g
※It is currently sold because it is cheap. Comes with a stand. Denon center speaker Using a glass fiber cone, it has a supple and stretchy mid-range, a light and tight bass range, and ultra-high frequency playback that can be played up to 200kHz, and the natural and clear sound image is attractive. There is dirt and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: stand
Main specifications: 3-way, 4-speaker bass reflex type anti-magnetic design, 16.5 cm cone type fiberglass woofer x 2, 2.5 cm soft dome tweeter x 1, leaf type super tweeter x 1 impedance 6 ohms, crossover frequency 3 kHz, 15 kHz frequency band 35 Hz to 200 kHz sound pressure level 90 dB dimensions W550 x H210 x D273 mm weight 10.3 kg
※It is currently sold because it is cheap. Since it is driven by a double woofer, it makes up for the lack of low frequencies in your theater system with a very large sense of volume. The amplifier section also has a large output of 400W, and the scale is perfect. There are several places where the top plate corner is damaged and paint is missing (Oikawa Tetsuji)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: power cable
Main specifications: Overall maximum output 400W LINE in 22kΩ HIGH IN 4.7kΩ AC100V 20cm cone type × 2 19Hz to 200Hz W330 × H650 × D433 mm 22.4 kg
※Since it has a cigarette smell, it is cheap and is sold as is. Elevoy vintage 38cm woofer unit. Although it is for musical instruments, it can also be used for audio without problems. It is energetic and regenerates any sauce with plenty of time (Oikawa Tetsuji)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: none
Main specifications: frequency band 60 to 600 Hz, 8 ohms, diameter 384 x depth, 8.9 kg
Digital sound repair machine. By predicting an ultra-high frequency range of 20 kHz or more and outputting it in addition to the original sound, it feels smooth, and the sound quality changes to very comfortable to listen to. There are no conspicuous scratches*Additional terminals have been added, but they cannot be used for both input and output (Sasaki Shota)
Maintenance information: 2024.5.26 Operation confirmed ※Additional terminals cannot be used for both input/output
Accessories: none
Main specifications: 1 RCA input/RCA output each, 5 stage effect switching size W132 x H71 x 334 mm weight 960 g
This is an MC cartridge for Hyundai Orthophone. You can enjoy the bright, sharp sound at a low cost. I also recommend it as an introduction to orthophones (Mizusaki Ryo)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: needle cover
Main specifications: MC cartridge output voltage 0.5 mV frequency band 20 Hz-25,000 Hz diamond needle aluminum cantilever suitable needle pressure 2.3 g dead weight 9 g
The price has been reduced! 2024/5/9 sales price 65,000 yen*It is cheap because the paint is in poor condition, such as peeling paint or soldering. Electrovoice's finest horn tweeter. It is a diffraction type unique to the Electrovoice, which is slightly larger than the T35. A phenolic diaphragm with silk as the core material, and an Alnico V magnet comparable to a scoker are used for the magnetic circuit. The exterior has scratches, paint peeling, and solder marks on the terminals. One side plate is missing (Yonejima Satoshi)
Maintenance information: 2024.5.9 oscillator test is good
Accessories: No accessories
Main specifications: playback frequency band 3,500 to 15 kHz impedance 8 ohms recommended crossover frequency 3.5 kHz or higher W73 x H191 x D125 mm 3.2 kg
※The woofer cap has a dent, so it's cheap. Denon tall boy speaker It is a model with high cost performance for both theater use and pure audio use. Since it has a double woofer configuration, you can enjoy low frequencies larger than its size. It plays any genre, such as jazz, pop, or rock. The exterior is dull overall, paint is chipped on the front corner, and there are conspicuous line scratches on the back side (Mizusaki Ryo)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: jumper plate
Main specifications: 3-way 4-speaker bass reflex crossover 2kHz, 13kHz 90dB W270 x H1130 x D325 mm 24.8 kg
Frequency board for Accuphase channel divider F-5/F-15 The crossover is 800 Hz, which is easy to use! The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: F-5/F-15/F-15L crossover 800 Hz attenuation characteristics -12/-18 dB switching
500Hz/2 way board included. Accuphase 2-way/3-way channel divider. You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: power cable, CB500, CB-2WAY
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
Pair tube double triode tube American short base clear top side getter measurement value 102/100 (rejected value 50) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
The price has been drastically reduced! 2024/5/19 sales price 320,000 yen A next-generation model with the L-550AX reviewed and refined from basic performance. We have introduced the latest technology comparable to the higher-level model L-590AX2, such as the unique ODNF 4.0 amplification feedback circuit, the new LECUA 1000, and a buffer circuit with a discrete configuration. It is a practical modern machine with enhanced resolution while acquiring sound with a sense of luster and density unique to pure A class amplification systems. The exterior is good with no conspicuous scratches. Serial G60500154 (Yonejima Satoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) W440 × H178 × D454 mm 24.3 kg
The price has been reduced! 2024/5/14 sales price 55,000 yen direct drive analog turntable. Equipped with a knife-edge tone arm in collaboration with SAEC. A Sumiko Oyster cartridge is also included, and it also has a built-in phono equalizer, so you can enjoy records right away. The exterior is good with no noticeable scratches. Serial 2280200 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual, AC adapter, connection cord, cartridge, head shell, original box
Main specifications: direct drive aluminum die-cast static balance type S-shaped tone arm length 223 mm needle pressure variable range 0 g to 5.0 g applicable cartridge mass 3.0 g to 12.0 g, 14 g to 23 g (including attached headshell) cartridge part: mm type output voltage 4.0 mV needle pressure 1.5 to 2.5 g mass 5.3 g analog output terminal: RCA pin jack (phono/line switching type) W420 x H117 x D356 mm Weight approx. 6.1 kg
Maintained! The mid-size α series uses an α-X balance circuit that prevents the effects of noise and distortion from the ground. The smooth, stretchy sound quality is attractive. Designed with CD playback in mind, the sound separation is good, and it is a classic premain that will keep you entertained regardless of genre. There are line marks and threads on the exterior. Serial 437100950 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, source switch, MM/MC switch disassembly, polishing grease application, power amplifier circuit transistor, adjustment volume replacement, output relay replacement, power supply part solder repair. Solder repair for other main parts, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation)
Accessories: No accessories
Main specifications: 90W+90W (8Ω) W448 x H160 x D441 mm 16.0 kg
Maintained! Best buy model from the late 90s. It inherits the traditional diamond actuation circuit, and is characterized by a well-balanced sound with a refined circuit configuration, such as a sense of SN in the mid to high range, and the certainty of the outline in the low range. Externally, there are bumps, etc. Serial 608024137 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (input selector, power amplifier direct, reck-out, processor, MM/MC changeover switch disassembly, polishing grease application, speaker 1/2 tone, ride ness, subsonic switch replacement, output relay replacement, solder repair, protector capacitor replacement, adjustment inspection, operation confirmation)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) phono (MM/MC) switching dimensions W432 x H165 x D450 mm weight 18 kg
The price has been reduced. 2024/3/12 sales price 49,800 yen Maintained! Sony's highest-grade 5-channel vari-controlled FM stereo tuner at the time. Equipped with a FET, the treble extension is excellent, and it also has the thickness unique to varicones. The retro and simple panel design is also attractive. There are dullness, small scratches, etc. appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.12 Maintained (The inside of the main unit was cleaned and the wall escutcheon cleaned. The dial transmission part has been corrected due to thread entanglement on the dial flywheel part. RF section tracking, meter instructions, and MPX detection have been adjusted. (Reworked and corrected due to poor contact (glare) in the output level volume)
Main specifications: FM stereo tuner, reception frequency 76 MHz to 90 MHz, frequency characteristics, 20 Hz to 15 kHz, antenna terminal, 300 ohm balance, 75 ohm unbalance, W400 x H145 x D310 mm, 9.2 kg
Maintained! A prime amplifier developed during the heyday of CDs and gained popularity. The powerful, punchy sound quality, which combines the quality of the mid-high range with the power of the low frequencies, is attractive. There is room not found in lower models, and you can enjoy the sound with a sense of scale typical of SANSUI. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 maintenance completed (tone and other switch disassembly polishing grease application (loudness, turnover, subsonic, muting, processor, input selector, power amplifier direct, source direct, tape, reckout switch), output relay, headphone relay replacement, power supply transistor replacement, power amplifier circuit transistor replacement, resistor, adjustment volume replacement, solder repair , interior and exterior inspection and cleaning, bias, DC adjustment, confirmation of each input/output, operation inspection)
Accessories: copy of instruction manual
Main specifications: Advanced α-X circuit equipped with 160W+160W (8Ω) damping factor 150 (8Ω) Phonomm/MC compatible W460 x H159 x D446 mm weight 33 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/19 sales price 578,000 yen Mount an SME Series V to a Michell Engineering belt drive analog player. First of all, I'm fascinated by this visual! Even though it's progressive, the design feels somewhat calm. The mechanism uses a floating 3-point support suspension and high-precision ball bearings that enable pinpoint contact to prevent vibration. In terms of sound quality, the precision that comes from SeriesV's tracing skills are well combined with a stable sound field expression with a good sense of connection. In addition to white rust on the exterior and arms, you can also see a feeling of use such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.17 Operation confirmed (rotation is slightly faster)
Accessories: instruction manual, original box, SeriesV instruction manual, original box
Main specifications: SME SerirSV: tapered magnesium arm, dynamic balance type, effective length 233.2 mm, needle pressure range 0 to 3 g, gyrodec: belt drive, 33/45 rotation compatible, W535 x H185 x D410 mm, 15.5 kg
With AI2-B1 (balanced input board) +AO2-B1 (balanced output board). This is the 2nd generation digital voicing equalizer. Compared to the previous DG-28, it is overwhelmingly easy to use and convenience has been improved. Sound quality can be controlled surprisingly smoothly by operating the stylus attached to the main unit. You can save as many as 20 patterns of personal data. There is a feeling of use on the exterior, such as line scratches on the top plate, scratches on the upper corner, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, remote control, power cord, connection cord, microphone
Main specifications: [Voicing] 1/6 octave 68 band IIR filter system adjustment range + · -12 dB [equalizer] 1/6 octave 74 band IIR filter+FIR filter/hybrid system adjustment range ± 12 dB [digital input/output] HS-Link/coaxial digital/optical digital 1 system each dimensions W465 x H151 x D396 mm weight 13.8 kg
Choke transformer inductance 10H/0.2A DC resistance 150Ω (measured 150.9Ω), drawer wire approx. 75mm, W79 x H67 x D70mm, approx. 1.3 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Pair tube 6J5 compatible ball English tea base measurement value 60/60 (rejected value 40) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Pair tube 6J5 compatible ball English tea base measurement value 62/60 (rejected value 40) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube 6J5 compatible ball English tea base measurement value 58/56 (rejected value 40) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
*Since it comes with a T4P adapter, it can also be used with a regular player. T4P standard cartridges. If you use a jacket-sized record player from the company, such as the SL-10, how about using a spare one? The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: No accessories
Main specifications: MM round needle needle pressure 1.5 to 2.0 g
The damper was replaced in 2023/6. Special cartridge for EMT arms. It is a model with broadcast station specifications, and has a full range of mid to low frequencies with high resolution but not thin lines. It features suppleness and clear resolution, and the intensity of the mid-range density deserves special mention. The exterior is dull. Serial 8935-12 (Yonejima Satoshi)
Maintenance information: 2023.6.2 Maintained (damper replaced)
Accessories: original box
Main specifications: MC type output voltage 0.15 mV suitable needle pressure 2.5 g impedance 24 ohms dead weight 17.6 g
A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources. There is a feeling of use on the exterior, such as minor corrosion and dullness (Kanai Hidetsugu)
Maintenance information: 2024.5.21 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Maintained by the manufacturer in 2022. This model has eliminated unnecessary auxiliary functions and has been thoroughly particular about sound quality. You can enjoy the delicate sound that pursues linearity unique to pure A class. This model has expressive power that you wouldn't think of as a pre-main amp, and is still popular today. There are no visible scratches on the exterior, etc., and it is good with a slight dullness from the age (Kobayashi Hitoshi)
Maintenance information: 2022.8.3 manufacturer maintained (output relay contact deterioration replacement, power switch defect replacement, ultimate attenuator disassembly contact cleaning, power amplifier electrolyte capacitor replacement, styrene capacitor replacement, balance volume contact deterioration replacement, overall board solder rework, comprehensive adjustment, operation characteristic test OK)
Accessories: copy of instruction manual
Main specifications: pure A grade operation 50W+50W (8Ω) line input 8 systems (RCA x 7/XLR x 1) 2 phono systems (MM/MC) W438 x H176 x D467 mm 30 kg
The fact that it is compatible with various cartridges with a counterweight setting, such as being mounted on a Michell Engineering analog player, seems useful. The general counterweight is 85 106 131 grams. The cost performance is high. You can see a feeling of use such as appearance, dullness, abrasions, rust, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 continuity confirmed
Accessories: instruction manual, original box
Main specifications: Cartridge weight 2.5 to 15.5 g (including cartridge mounting screws)
※The output has been changed to an RCA terminal. 15th anniversary limited edition model of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it has a solid framework and a thick sound. In addition to the exterior, as described above, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5,21 operation confirmed
Accessories: Connection cable (external product)
Main specifications: frequency band 20 Hz to 70 kHz 40 ohms crosstalk 60 dB or more W92 x H55 x D145 mm 720g
Maintained! Grad's rare wooden tonearm, which received rave reviews in stereo sound magazines, is now in stock. The beautiful curves and sleek design of the gunstock type walnut are excellent, and it is an arm that is the cornerstone of the Fifty's Sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintenance completed (arm side lead wire shell terminal solder repair output terminal 5P connector RCA terminal replacement cartridge installation simple check conductivity check)
Accessories: none
Main specifications: Dynamic balance type 0.5 kg (actual measurement)
※Since it is cheap, it will be handed over as is. Compact 2-way speaker system You can easily enjoy music with a smooth and light sound. As for the exterior, there are slight creases on the bottom decorative sheet and some tears on the surface. Serial 6890496, 6890496 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type, 6Ω, W160 x H256 x D203 mm, 2.5 kg
Maintained! A hit model during the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 212487 (Hiroki Aso)
Maintenance information: 2024.4.26 maintained (MUT switch, push slide, SW exchange, volume VR, sound replacement, speaker relay due to deterioration, 14 parts replacement, other input selector, cartridge selector, each SW disassembly contact, polishing grease application, etc., DC bias balance adjustment, each input/output sound output check)
Accessories: copy of instruction manual
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
Tannoy Mercury series small bookshelf. It uses network technology that follows the technology of the company's Prestige “SE” series. Silver-coated copper wire manufactured by Vandenhall is used for internal wiring to enhance sound quality. There are dust stains on the tweeter dome, small scratches such as peeling veneer on the upper front corner, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net
Main specifications: 2 way 8Ω 86dB W140 × H210 × D160 mm 2.2 kg
Speaker cable, 1.5 m pair by wire specification, EQB8, Y lug specification at both ends, 7N-OCC Copper conductor top model, high CP cable with sound quality close to Eclipse 8 while keeping the price low. This cable is excellent for SN and has just the right amount of softness for sound (Kojima Yosuke)
Accessories: special case
Comes with original box! Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images. (FUJISAWA KOSHI)
Accessories: original box
A multi-combination structure that allows you to select 7 weights by combining 3 types of stabilizers. It makes it possible to fine-tune the sound quality for each record, and it can also be used on record players that are not compatible with heavy stabilizers. (FUJISAWA KOSHI)
Accessories: instruction manual
Main specifications: W69 x H27 mm (when all parts are attached) under (polycarponet) 70g inner (brass+gold plated) 90g upper (brass+uredium plated) 160g
One owner item with original box! Mono cartridge for SP boards. This is a reprint of the CG65D. You can enjoy the SP board with a firm core and a bold tone. There is little feeling of use and the condition is good. Serial 721447 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: instruction manual, original box
Main specifications: MC type needle pressure 4.5 g output voltage 1.5 mV frequency characteristics 20 to 18,000 Hz impedance 6 ohms dead weight 35 g
The price has been drastically reduced! 2024/5/9 sales price 49,800 yen This bookshelf is made in England using solid wood veneer for reinforced MDF. The plumpness of the low range has been handed down since the 12th era, and the low range, which has a rich sense of volume, is attractive when it is small. You can enjoy natural sounds suitable for vocals and classical music. The exterior has scratches and several dowels broken in places on the saran net. Serial 00342B (Yonejima Satoshi)
Maintenance information: 2024.5.9 sweep test is good
Accessories: saran net
Main Specifications: Model: 2 Wave Reflex Type Crossover Frequency 2.2 kHz Output Sound Pressure Level 86 dB Rated Impedance 6 Ω Playback Frequency 45 Hz to 28 kHz W205 x H330 x D253 mm Weight 7.6 kg/book
A standard machine that also supports 192 kHz/24 bit digital input. With the theme of improving speaker driving power, the power transistors on the power amplifier driver stage have been made larger, and you can hear sounds with a higher driving power with a sense of stability. There are no particularly noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, power cable
Main specifications: 40W+40W (8Ω) PHONO (MM) optical digital input 2 systems coaxial digital input 1 system W440 × H105 × D370 mm 7.8 kg
This is a speaker system mounted on Altec's coaxial 8-inch unit 409-8E. The compatibility between Yonematsu, which has a good sound, and the bright and light 409-8E is excellent, and drinking drops to the medium to high range, which has a nice texture. The light, mid-range tone goes great with old sauces. There is dullness and small scratches (Sasaki Shota)
Maintenance information: 2024.5.23 Sound output test is good
Accessories: none
Main specifications: Unit used: 409-8E playback frequency band 85 to 18,000 Hz efficiency 97 dB W377 x H432 x D189 (top surface) 238 (bottom) mm 6.4 kg (actual measurement)
The price has been drastically reduced. 2024/5/19 sales price 158,000 yen Maintained. The Lux tubular premium FM/AM tuner WZ-30 was developed with the aim of being the ultimate FM stereo tuner. With the warm and thick sound quality typical of a tube ball, you can enjoy broadcasting in a relaxed atmosphere. The circle of the manufacturer logo on the front is off (Oikawa Tetsuji)
Maintenance information: 2024.5.19 Maintained (2 STEREO/MONO switching relays unstable replacement, 1 μF defective and deterioration replacement, 3 FM sensitivity improvement measures → vacuum tube 6CW4 replacement 3 (using supplies) · Noise improvement measures → 2 additional 0.002 μF Mylar capacitors · FM and AM circuit IF/RF/MPX re-adjustment
(*Operation has also been checked with AC 100V)
Accessories: copy of instruction manual
Main specifications: tubular FM/AM tuner W470 x H175 x D275 mm 10 kg
The price has been reduced! 2024/5/19 sales price 29,800 yen ※Spikes are out of stock. A polymer composite material, which is an ideal damping material for the surface in contact with the speaker, is used to ensure isolation between the speaker and stand. Also, resonance is suppressed by making 1 of the 3 struts thicker and changing the resonance frequency. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: top plate W200 x D280 x H15 mm bottom plate W260 x D320 x 4 mm height 625 mm 6.0 kg per unit (actual measurement)
The price has been reduced! 2024/5/23 sale price 19,800 yen Celestion bookshelf speaker. Using a felt fiber cone for the woofer diaphragm and a titanium diaphragm for the tweeter, the mid-range is slightly glittering. It creates what is called a British sound. The exterior has dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net
Main specifications: 2-way 2-speaker sealed unit, 15 cm cone type, 2.5 cm dome type for low range, frequency characteristics, 75 Hz to 20 kHz, impedance 8 ohms, size W 185 mm x H310 mm x D 215 mm, weight 4 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/4/30 sales price 10,000 yen, balance cable, only 1.0m, uses the technology introduced in the 7N-A2070, uses stress-free 6N copper conductors, and thick rhodium plated plugs. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
Pair tube ambient heat beam tube made in America, measured value 42/40 (rejection value 25) with original box (the claws on one side of the box are missing) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, ambient heat beam tube, made in America, measured value 42/42 (rejected value 25) with original box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2024/5/18 sales price 178,000 yen Pickup replacement included manufacturer maintenance! It is a CD player designed with the concept of a D/A converter equipped with a CD transport. Switching is possible with the 44.1/96/192 kHz upsampling buttons. It is characterized by a comfortable sound quality that combines highly textured softness and freshness. There are dents on the exterior and front panel, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.18 manufacturer maintenance (pickup replacement, operation confirmation)
Accessories: remote control, power cord
Main specifications: CD player equipped with digital input, uses a PHILIPS VAM1201MK3 mechanism, supports upconversion to 24 bit/192 kHz (CD playback, external input) digital output/light 1, coaxial 1, W435 x H73 x D345 mm, 7.2 kg
Refresh yourself with internal and external maintenance! This is an attractive mid-size model with the large 38cm HPD385 unit pressed into a compact enclosure. It has good phase characteristics, and its highly textured, and moist tone makes classical music and vocals sound pleasant. The exterior has been beautifully finished due to maintenance. Serial 509925 509926 (Hiroki Aso)
Maintenance information: 2024.5.23 Maintained (exterior cleaning/repair/touch-up front baffle coating unit maintenance (edge damping agent coating high range side magnetic circuit rust removal/gap cleaning/center adjustment) ATT cleaning unit detached)
Accessories: saran net
Main specifications: coaxial 2-way speaker front bass reflex system 8Ω 91 dB W540 x H840 x D310 mm 32 kg