Network coil attenuator pair sale Orient Hi-B cut core attenuation -1 to -20 dB (1 dB interval) maximum input 300 W usage frequency 200 Hz or more, line diameter 1.2 mm, W85 x H72 x D75 mm, approx. 1.1 kg/piece with connection diagram (Kojima Yosuke)
Accessories: connection diagram
A pair of film capacitors from Shizuki Electric Works. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unconfirmed
Accessories: none
A pair of film capacitors from Shizuki Electric Works. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unconfirmed
Accessories: none
A pair of film capacitors from Shizuki Electric Works. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unconfirmed
Accessories: none
Set of 2 This is a U-sigma film capacitor. There are no solder marks. It will be unconfirmed. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: none
※Operation has not been confirmed. DC630V pair of film capacitors from Shizuki Electric Works. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unconfirmed
Accessories: none
※Operation has not been confirmed. DC630V pair of film capacitors from Shizuki Electric Works. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unconfirmed
Accessories: none
A pair of film capacitors from Shizuki Electric Works. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unconfirmed
Accessories: none
A pair of film capacitors from Shizuki Electric Works. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unconfirmed
Accessories: none
Fostex metallized polypropylene film capacitors, used set of 2. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unchecked
Accessories: none
Key Specifications: 1.0 μF capacity
※Red and black for 1 piece only. This is a gold-plated speaker terminal with unknown details. How about people who are thinking about making their own speakers (Takasaki Atsushi)
Maintenance information: 2024.1.2 continuity confirmed
Accessories: screws
Main specifications: W54×H24mm
Unspecified AC inlet. It appears to be unused. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: 6A 250V
Set of 4 Unspecified speaker terminal. Compatible with banana plugs. It appears to be unused. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Set of 12 red and white. RCA terminal with unknown details. It appears to be unused. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Output transformer pair sold, output for push pull, 100W, primary: 3.5kΩ, secondary: 4-8-16Ω, W125 × H114 × D125 × H138 mm, approx. 6 kg/piece (actual measurement, not including protrusions) There are minor hits in places (Kojima Yosuke)
Accessories: none
Main specifications: W125 x H114 x D125 x H138 mm, approx. 6 kg/piece (actual measurement, not including protrusions)
Choke transformer 5H/250 mA (maximum 330 mA) DC resistance 67 Ω (measured 65.0 Ω) W84 x H105 x D76 mm 2.3 kg There are small hits in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-105V secondary: 20-220-420-440V/0.7A 6.3V/4A ×3 70V/60mA W127 × H115 ×D127 mm 8.1 kg (actual measurement, not including protrusions) There are minor scratches (Kojima Yosuke)
Accessories: none
Large transformer amplifier chassis Originally, the TANGO MS-380DR, FW-100-3.5R, and MC-5-250D were attached to the transformer; many attachments are also included; there are scratches on the top angle ※ fixing screws are not attached (Kojima Yosuke)
Accessories: Attachments
Main specifications: W500 x H85 x D275mm 5.5 kg (attachment included)
Exclusive arm base for Nottingham's Hyper Space HD long arm. Arriving alone is rare. If you are thinking about upgrading to a long arm, please take this opportunity (Sasaki Shota)
Accessories: none
7,000 Hz module for the rare LNC-2. It is a module that can be converted to 3 ways simply by attaching it to the LNC-2 center board. Be sure to use the 43 series 3-way version or the original system (Tamura Eiji)
Maintenance information: 2023.11.10 Operation confirmed (sound output checked with LNC-2)
Accessories: none
Power transformer sold 1 piece primary: 100-110V secondary: 8 (CT) -12-14-16V/2A W99 x H67 x D70 mm 1 kg with original box (Kojima Yosuke)
Accessories: original box
Power supply transformer input 100V output A power source: 6.3V/1A B power supply: 260V/30mA (with CT), 15,17V/2A (bridge only) W85 x H57 x D70 mm approx. 1.5 kg (actual measurement, not including protrusions) There is dullness in places on the body, but it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: original box
Power transformer 1st order: 100V 2nd order: 350V-320V-290V-70V-320V-350V-350V/DC170mA 6.3V-2.5V/3A 6.3V-2.5V/3A 6.3 V-5V/3A 103 × 86 × 85 mm 3.8 kg There are paint peeling and scratches in places (Kojima Yosuke)
Accessories: none
Repeat coil pair sales lot: 6V70/6V70 W44 x H91 x D43 mm 0.56 kg/piece (actual measurement, not including protrusions) There are paint peeling and bumps ※Only conduction checks with a tester were carried out (Yosuke Kojima)
Accessories: none
Interstage driver transformer sales matching impedance 1st: 10 kΩ 2nd: 40 kΩ W67 x D70 x H90 mm approx. 1.4 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Choke transformer 10H/110mA maximum DC resistance 195Ω (actual measurement 195.7Ω) W66 x H72 x D72 mm approx. 1.1 kg Rust floats in places and there is paint peeling (Kojima Yosuke)
Accessories: none
Output transformer only 1 push-pull output 10 W primary: 10 kΩ secondary: 4-8-16 ohms W61 x H79 x D63 mm approx. 0.9 kg (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ohm-CT Secondary: 10 kΩ Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approximately 0.1 kg There is rust in places (Yosuke Kojima)
Accessories: none
Choke transformer 10H/120mA DC resistance 110Ω (measured 111.9Ω) W68 x H91 x D71 mm 1.6 kg paint peeling in places and there are rust spots (Kojima Yosuke)
Accessories: none
※Since the mounting bolt is bent at 1 place, it is inexpensive. Choke transformer 10H/120mA DC resistance 110Ω (measured 111.9Ω) W68 × H91 × D71 mm 1.6 kg There is paint peeling in places (Kojima Yosuke)
Accessories: none
Choke transformer 5H/200mA DC resistance 70Ω (actual measurement 66.3Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
Line matching transparent pair sold primary: 600 ohms, output 10 dBm, frequency range 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, is Tamura's OEM specification (Yosuke Kojima)
Accessories: none
Choke transformer 15H/150mA DC resistance 155 ohms (actual measurement 157.8 ohms) W84 x H105 x D75 mm 2.3 kg with original box, some paint is peeled off, and there are scratches (Kojima Yosuke)
Accessories: original box
AC100V/0.6A 15V/1.5A 5V/2A 6.3V/1A 260V/35mA Center Tap Rectifier W95 x D95 x H64 mm 1.84 kg for Power Transformer Tube Preamp Some of the drawer lines with the original box are short, and there is some rust on the main body (Kojima Yosuke)
Accessories: original box
Choke transformer 5H/120mA (maximum 160 mA) DC resistance 155 ohms (actual measurement 157.5 ohms) W54 x H80 x D69 mm 0.7 kg/piece Rubbed against the nameplate, and there are paint peeling and snags on the main body (Kojima Yosuke)
Accessories: none
Choke transformer 5H/120mA (maximum 160 mA) DC resistance 155 ohms (actual measurement 158.7 ohms) W54 x H80 x D69 mm 0.7 kg/piece Rubbed against the nameplate, and the printing has disappeared (Kojima Yosuke)
Accessories: none
Output transformer spare for single sale 1st: 2-2.5-3.5-5kΩ 2:4-8Ω (1st time: 2-2.5 kΩ) 8-16 Ω (1st time: 3.5-5 kΩ) W92 x H81 x D81 mm 1.8 kg/piece Rust floats on the stay part, and there is rubbing and scratches on the main body (Kojima Yosuke)
Accessories: none
Input transparent pair sales primary: 600 ohms secondary: 60 kΩ boost ratio 1:10 W 25 x D43 mm approx. 70 g/piece There is overall dullness (Kojima Yosuke)
Accessories: none
Choke transformer 10H/200mA DC resistance 95Ω (actual measurement 95.5Ω) W83 x 109 x D75 mm 2.4 kg There are hits and scratches and paint peeling in places on the main body (Kojima Yosuke)
Accessories: none
Output transparent pair for single primary: 2.5 KΩ secondary: 4-8-16 ohms output 12 W/ch W65 x H90 x D80 mm 1.14 kg/piece There are marks where the corners of the terminal plate were cut, and there are scratches and rust on the main body (Kojima Yosuke)
Output transparent pair for push-pull, output 10W, primary: 8kΩ, secondary: 4-8-16 ohms, W62 x H89 x D63 mm, approx. 1 kg/piece, paint is peeled off, and there are scratches (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-110V Secondary: 40V/50mA 6.3V/3.5A × 2 6.3 V/1.2A × 2 10-115-135-115V/AC0.9 A W120 × H72 × D104 mm approx. 4.2 kg (actual measurement, not including protrusions) There are places where some terminals have come off (there is no problem with conduction) There are paint peeling and scratches in places (Yosuke Kojima)
Accessories: none
Significant price reduction. 2023/10/4 sales price 8,000 yen This is a general-purpose multi-aluminum case from Takachi Electric Industries. This is a sturdy, all-purpose case with a simple structure where the panel is sandwiched between the top and bottom covers with corner R. Please use it as a case for devices such as measuring instruments, power supplies, controllers, etc. Unused, but there are small scratches (Fujisawa Yukishi)
Maintenance information:
Main specifications: W350 x H130 x D260 mm (actual measurement)