Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg
TAOC rack underspacer and upper spacer set. If you have a spare or lost one, don't miss it. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Key Specifications: 6 upper spacers, 2 underspacers, 3 cast iron knurled nuts
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. It is ideal for medium speakers such as the NS-1000M. The exterior has scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W370 x H250 x D290 mm 6.5 kg
A power supply with approximately 2.5 times the capacity of the power supply built into the GT player. In addition to improving rotation stability, the phono motor's bidirectional servos are used as electronic brakes, and heavyweight turntables stop quickly. There are dents on the exterior, dents on the top plate, rust on the output terminals, dullness throughout, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: Applicable models GT-2000/L/X W135 x H93 x D365 mm, weight 5 kg
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Vibration-absorbing insulators, set of 8, type S with emphasis on vibration absorption, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Asaine Tomoho)
Accessories: none
Main specifications: W20mm×H5mm×D20mm
Nagaoka's self-adhesive record cleaner. This self-adhesive record cleaner uses special rubber to remove dust and dirt from the bottom of the sound groove. Dirt on the roller is removed by washing it with water, and it can be used over and over again. The exterior is relatively good (Yonejima Satoshi)
Accessories: storage case
Main specifications: case size W106 x H44 x 100 mm 133 g (including case)
The price has been drastically reduced. 2024/5/12 sales price 238,000 yen Accuphase power conditioner. PS-500 upgraded model. The sense of transparency increases, and the way stillness and motion are drawn is more delicate. It is recommended for those who are thinking about upgrading the power supply area. There are dents and stroke marks on the side (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual, power cable
Main specifications: rated output capacity 510V (continuous) rated output voltage AC100V±2V rated output current 5.1A output frequency 50/60 Hz (synchronized with input frequency) instantaneous current supply capacity 70A input voltage range AC90 to 110V power consumption at no load 55 W 475 W x 180 H x 394 Dmm 23.8 kg
This is a brass tweeter stand for the company's T900A, T925A, and T90A. The tweeter can be stably placed on top of the speaker system. The exterior has scratches, dullness, etc. (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W65 x H20 x D91 mm weight 471 g (actual measurement)
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
Set of 4 Made from Hokkaido Asada cherry wood and African ebony. It doesn't tighten too much as a metal insulator, and it makes the most of the sound of the music. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W70×D70×H35mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
An item that improves sound quality simply by placing it on the floor between the speakers! The development period is 30 years, so it's worth trying out. For those who are worried about not being able to tune the way they want with just sound-absorbing materials or reflective materials, please go for it. As far as I've tried it at the store, I have the impression that the high range is slightly milder and the middle range is thicker. There are scuffs on the exterior and bottom, but others are good with little feeling of use (Kobayashi Hitoshi)
Accessories: special aluminum case, special cleaner liquid, cloth, instruction manual
Main specifications: diameter 80mm height 58mm 1.1 kg
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. The exterior has a feeling of use such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. The exterior has a feeling of use such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. The exterior has a feeling of use such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Rubber insulators for Tokyo soundproofing. The hemispherical type is firmly fixed and has excellent stability. Recommended for those who like a crisp, hard sound. There is a feeling of use on the exterior due to dirt, small scratches, etc. (Tamai Jun)
Accessories: original box
Main specifications: size φ30 mm weight 36 g load capacity 15 kg/4 pieces
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Main specifications: load capacity 50 kg (4 pieces) body height 19 mm spike height 5 mm
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Main specifications: load capacity 50 kg (4 pieces) body height 19 mm spike height 5 mm
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker or amplifier. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: none
Main specifications: load capacity 50 kg (4 pieces) body height 19 mm spike height 5 mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: none
Main specifications: W20mm×H5mm×D20mm
High rigidity, high specific gravity, and high vibration damping are achieved by sandwiching cast iron powder on a high-density wooden board. It reproduces thick, stable sound quality without the peculiar characteristics of specific materials. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1,200×H40 ✕ D600mm 22.0kg
High rigidity, high specific gravity, and high vibration damping are achieved by sandwiching cast iron powder on a high-density wooden board. It reproduces thick, stable sound quality without the peculiar characteristics of specific materials. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1,200×H40 ✕ D600mm 22.0kg
Set of 4. High quality banana plugs made from machined solid brass. The terminals are machined from solid brass and finished with 24K gold plating. Since there are fixing screws at the tip and the root, the cable can be firmly fixed. The exterior has dullness on the plating part (Hiroki Aso)
Accessories: none
Main specifications: machined solid brass, 24K gold plating, 21.5g/piece
Set of 4. High quality banana plugs made from machined solid brass. The terminals are machined from solid brass and finished with 24K gold plating. Since there are fixing screws at the tip and the root, the cable can be firmly fixed. The exterior has dullness on the plating part (Hiroki Aso)
Main specifications: machined solid brass, 24K gold plating, 21.5g/piece
Set of 2 High vibration damping due to the 7-layer structure of a special coating containing metal powder. There are female screws on the four corners of the back to which spikes can be attached. There is a slight feeling of use such as a scratch on the top plate (Mizushima Itsuro)
Accessories: none
Main specifications: W350 x D450 x H52 mm 7 kg/sheet
Set of 4 TIGLON magnesium spike holder Made of 100% pure magnesium, you can get a clear sound that suppresses unnecessary vibrations (Mizushima Itsuro)
Accessories: none
Main specifications: thickness 10mm diameter 33mm 14g/1 piece
Set of 4 TIGLON magnesium spike holder Made of 100% pure magnesium, you can get a clear sound that suppresses unnecessary vibrations (Mizushima Itsuro)
Accessories: none
Main specifications: thickness 10mm diameter 33mm 14g/1 piece
A simple and easy to use Chikuma power box. It contributes to improving the audio environment around the power supply. There is a slight feeling of use such as small scratches (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: power cable
Main specifications: rated voltage 125V, number of output ports, 6 ports, chassis material A6063/A5052, W60 x H49 x D340 mm, 1.2 kg
This is a 6-port power strip using a machined duralumin housing. A high C/P model that uses a high cost system with a complete parallel connection to prevent noise. It is a well-balanced model with a high level of SN, delicacy, and texture (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
Main specifications: 6 port dimensions W400 x H43 x D70 mm
※It's cheap because it's in poor condition! It is a board type insulator that is effective simply by placing it under an amplifier or speaker. The exterior has a feeling of use over time, such as peeling veneer, dullness, and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W540×D290×H80mm