A self-made board with a rubber board sandwiched between trees. A damping effect can be expected. There are scratches, dullness, and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: W441 × H20 × D582 mm 3.9 kg
Speaker stand with a beautifully pasted JBL logo. How about a medium sized bookshelf? It is also possible to set up diagonally depending on how to place it. Unevenness of painting on the back bottom side (Yoichi Murakoshi)
Accessories: none
Main specifications: W305 × H84 × D317mm 0.7kg
A self-made board with a rubber board sandwiched between trees. A damping effect can be expected. There are scratches, dullness, and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: W483 × H15 × D437 mm 2.4 kg
Self-made gunmetal turntable. It weighs 2.6 kg. When I replaced the rubber sheet, the performance parts were perfectly divided and sharpened. Recommended for those who like a tight sound. There is dullness and dirt (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 290 mm, thickness 5 mm
Set of 4 unspecified carbon insulators. Comes with a screw (M8 x 13 mm). How about the feet of players etc. There is a feeling of use such as dullness (Hiroki Aso)
Accessories: none
Main specifications: diameter 57 φheight 42 mm weight 180 g (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2022/6/29 Selling price 8,000 yen Self-made speaker stand is made of steel, but the top plate is wooden. Judging from the size of the top plate, it looks just right for the size of an ELAC speaker. The appearance is dull and dirty. Also, there are places where the adhesion of the legs is sweet. (Tamura Eiji)
Accessories: none
Main specifications: Top plate: W125 × D275 mm Overall: W245 × H715 × D275 mm Weight 10.9 kg/book
A self-made board with a rubber board sandwiched between trees. A damping effect can be expected. Kusumi, there is a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: W400 × H15 × D300 mm 1 kg
The price has been drastically reduced. 2023/8/7 sales price 5,000 yen. If you were looking for a 23mm thick plywood double tweeter stand with unknown details, please go ahead. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: aperture diameter 80 mm W200 x H125 x D85 mm 394 g (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/2/2 sales price 3,000 yen This is a wooden self-made cabinet that can be equipped with a DENON DP-3000. There are a few scratches, etc., but it is well-made by laminating. There is a feeling of making it yourself (Tomonori Asae)
Main specifications: size 600 x 110 x 450 weight 9.9 kg (actual measurement)
A self-made cabinet with an SME3012R attached to it. An aluminum frame is attached to plywood and foot screws are embedded. The head of a screw is simply placed on an insulator that has been diverted from another source. There are uneven varnish, kusumi, and plywood flipping of hole corners (Kanai Hidetsugu)
Accessories: insulator ()
Main specifications: W603 × H54 (body plate H45) × D453 mm Weight 4.7 kg
Turntable hole φapprox. 310mm, screw hole φ8mm, tone arm hole 70×45mm
Set of 4 unspecified carbon insulators. There is a feeling of use such as dullness (Hiroki Aso)
Accessories: none
Main specifications: diameter 56 mm, height 30 mm, weight 176 g (actual measurement)
This attenuator uses a carbon variable resistor RV24YN 50kΩ. The exterior is dull, etc., and there is a feeling of use (Morning Inachi Law)
Maintenance Information: 2022.11.13 Operation confirmed
Accessories: none
Main specifications: size 160 x 95 x 170 mm weight 680 kg (measured value)
External Tone Arm Mounting Base SME 3009, 3010, 3012 series are installed. Mounts with nuts+can be pinched from the side There are rubbing scratches etc. (KONDO Hirotsugu)
Accessories: wrenches/screws
Main Specifications: Diameter 18mm to 40 mm Body W65 × H110 × D95 mm Fastening Base H20mm Weight 2kg
Line transformer A line transformer incorporating Tamura A-8711 and TN-6. With gain volume. The polite and smooth sound softens the sound a little, and the depth comes out in the mid-range sound. There is dullness in the body (Yosuke Kojima)
Accessories: none
Main specifications: W130 × H133 × D22 mm9 3 kg
Speaker selector with 2 inputs and 3 outputs. The exterior has a feeling of use such as dullness and scratches. Rubber tape is attached to the bottom (Tomonori Asaine)
Maintenance Information: 2022.11.12 Continuity Confirmed
Accessories: none
Main specifications: External dimensions W145 x H45 x 135 mm Weight approx. 376 g (actual measurement)
A self-made attenuator. 16 contact volume is used, Tektron T-245L-20600 × 2 20kΩ (seems to be a custom-made product) is used. The gain is low. The range of motion of the knob is narrow and only goes up until 12:00 (Oikawa Tetsuji)
Maintenance Information: 2022.5.3 Confirmation
Accessories: None
Main specifications: W370 × H126 × D370mm 10.3 kg (actual measurement)
Self-made bulk capacitor with unknown details. Sound quality is enhanced, and response can be expected to improve. The exterior is generally good (Hiroki Aso)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: none
Self-made attenuator with unknown details. BNC specification (Oikawa Tetsuji)
Maintenance information: 2023.10.10 Operation confirmed
Accessories: none
Main specifications: W120 x H160 x D80 mm, weight 600 g (actual measurement)
JBL Horn Gold Wing Wood Stand If you were looking for it, please take this opportunity. There is a feeling of use such as small scratches. (Jun Takasaki)
Accessories: None
Main Specifications: W510 × H215 × D470mm 4.3kg