※Since there is no manufacturer, it is currently a product for sale. An audio power supply that combines a balance former and a regulator. Equipped with a DC suppressor, it is possible to reduce the howling of large internal transformers. It is of excellent quality and is compatible with a complete set of everything from regenerators to preamps and power amplifiers. The exterior has a scratch on the front right corner. Serial 110302 (Sasaki Shota)
Maintenance Information: 2023.8.12 Operation confirmed
Accessories: power cable
Main specifications: inrush current prevention zero cross switch (balance former section rated output power 2200W, regulator section rated output power 100W) input voltage 100/200V W346 x H150 x D435 mm 24 kg
The price has been drastically reduced! 2023/6/16 sales price 168,000 yen Accuphase phono equalizer unit. PHONO input can be added to compatible models by installing it from the rear panel. The printed board uses a Teflon base material and is equipped with a dedicated input circuit that matches each MM/MC cartridge. The exterior is generally good (Tomonori Asaine)
Maintenance Information: 2023.6.16 Operation confirmed
Accessories: original box
Main specifications: Compatible models C-2800 C-2810 C-290 C-290V C-2400 C-2410
※Since there is no manufacturer, it is currently a product for sale. An audio power supply that combines a balance former and a regulator. Equipped with a DC suppressor, it is possible to reduce the howling of large internal transformers. The quality is impressive, compatible with everything from regenerators to preamps and power amplifiers. The exterior has a feeling of wear such as dullness. Serial 110308 (Yamato Yuki)
Maintenance Information: 2023.7.2 Operation confirmed
Accessories: power cable
Main specifications: inrush current prevention zero cross switch (balance former section rated output power 2200W, regulator section rated output power 100W) input voltage 100/200V W346 x H150 x D435 mm 24 kg
1.5 times the thickness of the SHELF, with enhanced vibration characteristics. Micro-level vibration countermeasures improve microphonic phenomena and reproduce high-level sound/sound fields. Carbon fiber is used while retaining 5 times the tension of iron and 25 times the resonance resistance of granite. The appearance has a feeling of use over time such as scratches and dullness. (Asaine Tomoho)
Main specifications: Size W480 × D380 × H31.7 Weight 10.0 kg (actual measurement)
This model is limited to 1000 units to commemorate Audio-Technica's 40th anniversary. The Echizen lacquered Asada cherry wood (produced in Hokkaido) housing is strong yet supple, and the Italian lambskin earpads are light and soft, and there is no feeling of pressure at all, even when worn for a long time. The veneer is slightly peeling off, and there is a slight feeling of use on the pad. Serial 400 (Takasaki Atsushi)
Maintenance information: 2023.3.25 sound output confirmed
Accessories: hard case
Main specifications: sealed dynamic driver diameter 53 mm playback frequency band 5 to 40 kHz maximum input 2,000 mW impedance 40 ohms output sound pressure level 102 dB 100% silk/silver wire+Hi-OFC/3.0 m (both exits) diameter 6.3 gold plated stereo standard plug high class OFC8N voice coil weight about 340g
It is a convenient specification that is simply built into your AccuPhase control amplifier. The sound quality is also high resolution, which is typical of Accuphase, so you can enjoy the deeply engraved sound. MC/MM compatible, switching impedance, etc. is operated on the front panel of the connected amplifier. There are no noticeable scratches. serial
E9Y249 (Tomonori Asaine)
Maintenance information: 2023.12.26 operation confirmed
Accessories: none
Main specifications: Exterior Teflon-based printed circuit board DIN standard connector Compatible models: C-2810, C-2410, C-2800, C-2400, C-290, C-290V ※When used with C-2820, 300Ω load impedance does not connect
* Since there is no manufacturer, it will be handed over as it is. Comes with original box Adopting new technology “wave restoration”, zero-cross switch circuit, DC suppressor, etc., as much as possible while removing parasitic vibration generated in AC lines, transformer growl, and waveform distortion as much as possible It increases the S/N of the playback sound. There are small scratches (Oikawa Tetsuji)
Maintenance information: 2022.3.21 continuity confirmed
Accessories: original box, instruction manual, power cable
Main Specifications: 6 Outlets Rated Output 2000W Output Voltage 100V Input Voltage 100V/200V Switchable Input Method IEC AC Inlet W346 × H150 × D435mm 22kg
Accuphase phono equalizer board. Two system inputs are possible. It has a high sense of transparency and sharp sound quality, and brings out the full tone of the MC type cartridge. Serial 04Y5 (Kimiya Miura)
Maintenance information: 2023.10.12 Operation confirmed
Accessories: no accessories
Main specifications: Compatible models C-2810/C-2800/C-2410/C-2400/C-290/C-290V
passive attenuator. The newly developed original balanced attenuator of the company's line amplifier LA10 version2 was taken out and mounted on a robust and stress-free machined aluminum ingot chassis. The original volume curve is adopted, and compared to conventional attenuators, it is superior in volume adjustment at realistic volume, and fine adjustments are possible (Fujisawa Yukishi)
Maintenance Information: 2022.10.9 Operation confirmed
Accessories: spikes
Main specifications: rated output 48step balanced attenuator minimum volume - 72dB INPUT/XLR balance L/R 1 system each OUTPUT/XLR balance L/R 1 system W100 × H76 × D170mm (including protrusions) mass 1.8kg
The price has been reduced. 2024/2/12 sales price 148,000 yen genuine Yukim product. Comes with original box Benz micro final model T9 This is a phono collazer for MC only. Although it is small, the sound is rich and the gain is good. The transparency is high and the range is wide, so it is compatible with any amplifier (Oikawa Tetsuji)
Maintenance information: 2024.2.11 Operation confirmed
Accessories: power adapter, original box
Main specifications: MC dedicated phono equalizer gain 62 dB S/N ratio 82 dB maximum input 5 mV input impedance 22 kΩ W150 x D64 x H25 mm 900 g
Brand new spikes are included! passive attenuator. The newly developed original balanced attenuator of the company's line amplifier LA10 version2 was taken out and mounted on a robust and stress-free machined aluminum ingot chassis. The original volume curve is adopted, and compared to conventional attenuators, it is superior in volume adjustment at realistic volume, and fine adjustments are possible (Sasaki Shota)
Accessories: none
Main specifications: rated output 48step balanced attenuator minimum volume - 72dB INPUT/XLR balance L/R 1 system each OUTPUT/XLR balance L/R 1 system W100 × H76 × D170mm (including protrusions) mass 1.8kg
passive attenuator. The newly developed original balanced attenuator of the company's LA10 Version 2 line amplifier was taken out and mounted on a robust and stress-free machined aluminum ingot chassis. The original volume curve is adopted, and compared to conventional attenuators, volume adjustment at realistic volumes is excellent, and fine adjustments are possible. There are some scratches on the exterior. Serial 1812019 (Tamura Eiji)
Maintenance information: 2023.3.31 operation confirmed
Accessories: spike, spike holder
Main specifications: rated output 48-step balanced attenuator minimum volume -72 dB INPUT/XLR balance L/R 1 system each OUTPUT/XLR balance L/R 1 system W100 x H76 x D170 mm (including protrusions) mass 1.8 kg
The price has been reduced. 2023/11/27 sales price 150,000 yen first arrival! Tuning item SOUND ELEMENT. By installing it between the power amplifier and the speaker, noise is removed from the waveform sent from the power amplifier, and clear and fresh sound is produced. The exterior is dull (Oikawa Tetsuji)
Accessories: none
Main specifications: diameter 88 mm x 54 mm (not including protrusions) 1.3 kg/piece
Adopting new technology “wave restoration”, zero-cross switch circuit, DC suppressor, etc., as much as possible while removing parasitic vibration generated in AC lines, transformer growl, and waveform distortion as much as possible It increases the S/N of the playback sound. There is a scratch on the side (Fujisawa Yukishi)
Maintenance information: 2022.3.12 continuity confirmed
Accessories: Power cord
Main Specifications: 6 Outlets Rated Output 2000W Output Voltage 100V Input Voltage 100V/200V Switchable Input Method IEC AC Inlet W346 × H150 × D435mm 22kg
A line transformer that uses two 76A repeat coils. It has a casing so that it can be used immediately for CD lines, etc. The appearance has a feeling of use over time such as scratches and dullness (Ryo Mizusaki)
Maintenance information: 2022.9.5 Operation confirmed
Accessories: none
Main specifications: Left CH terminal 2-5 43.4 Ω terminal 4-7 43.1 Ω right CH terminal 2-5 41.8 Ω terminal 4-7 43.0 Ω size 120 × 78 × 325 mm weight 3.3 kg ( (All actual measurements)
This is a special limited edition model with traditional Echizen lacquer applied to the heartwood housing of Asada cherry trees from Hokkaido. The high-density core material sounds good and has a tight sound quality. Traditional Japanese lacquering has a positive effect on the sound of wood. There is a slight feeling of use on the ear pads. (Miura Kimiya)
Maintenance information: 2023.5.10 operation confirmed
Accessories: no accessories
Main specifications: sealed dynamic type, using Asada cherry blossoms, 50ohm, 98dB, 5Hz~30kHz, 8N-OFC voice coil, 3.0 m cord, weight: 340 g
100V specification Nakamura Seisakusho's clean power source. Noise from outside is shut out, and a high signal-to-noise ratio is achieved. It is an accessory for enthusiasts who can experience not only the fine texture of the mid to high range, but also the expanded sense of sound field. The exterior has scratches, lines, and paint peeling. Cereal 10858 (Satoshi Yonejima)
Maintenance information: 2023.3.17 manufacturer maintained (foot replacement. (Maintenance carried out)
Accessories: power cable
Main specifications: input voltage 100V output outlets: 4 ports W260 x H150 x D465 mm (legs and protrusions not included) Weight: approx. 27 kg