The disposal price has been reduced! (Member discounts are not applicable) 2022/6/7 sales price 198,000 yen maintenance completed! Supports a variety of applications, from 2-track 19/38cm recording and re-recording to 4-track 19/9.5cm playback. A popular model that employs a unique isolate loop method by Technics. The unique mechanism of single capstan and double pinch roller achieves stable driving performance. The rich sound that responds to hearing is unique to open decks. The appearance has a feeling of use such as dullness, scratches, rust, etc. Serial RD869987 (Nobuyuki Takahashi)
Maintenance Information: 2022.6.7 Maintained (1 Reel clamper shaft replacement, spring added holding force 1kg, motor shaft and bearing oil/grease applied, reel height adjustment 2 Power cord replacement and replacement of 3 fuses for deterioration 3 counter belt replacement (x2), counter mechanical cleaning and shaft oil replenishment, character addition treatment for character disappearance 4 reel tension arm Bearing grease up and cleaning treatment, micro switch replacement (×1) 5 reel base brake pad replacement (×4) and brake adjustment, reel stand height adjusted, reel motor at PLAY Winding and back tension torque adjustment 6 Operation panel lamp replacement (×3) and tact switch disassembly cleaning treatment, key operation knob cushion pad replacement 7 Pinch roller and axis Clean and apply oil to pinch roller shaft 8 Replace many deteriorated electrolytic capacitors (power supply board part (×13), playback amplifier board part (×11), recording amplifier board part (×26), bias Amplifier board part (×2), reel control unit (×14), control logic part (×9), lineAMP etc. (×23) total 108 pieces) 9 head block section cleaning and head changeover switch disassembly Cleaning Procedure 10 Capstan Motor Servo Circuit PLL Lock Timing Adjustment & Speed Changeover Switch Disassembly Cleaning & Pitch Control Volume Cleaning Treatment 11 Input Volume (LINE, MIC) and output volume cleaning treatment, lever switch disassembly cleaning treatment (Monitor SW × 2, Tape Select SW × 2, Rec Mode SW×2 12 Head tilt adjustment (azimuth adjustment), playback level adjustment (200nWb/m0dB), equalizer adjustment, recording level and bias adjustment, bias trap adjustment, meter level indication Adjustment 13 meter panel for decolorization of scale bar scale part red only correction 14 Others, substrate cleaning and solder check and additional soldering treatment, input and output terminal cleaning, sensory by music source Inspection was carried out and the results were good. 15 Reference value; Self-recording playback W&F (WTD) 0.025%, WOW (0.017%), Flutter (0.05%) and good. However, it depends on the tape used. 16 Precautions for use; When using a back coating type tape with a closed loop type, W&F may deteriorate because the tape slippage becomes worse due to the closed-loop running mechanism. (This is caused by the deterioration of the mechanism and backcoat tape slippage, and can only be improved by replacing the tape.)
Accessories: None
Main specifications: 2 tracks 2 channels (recording/playback) 4 tracks 2 channels (playback) maximum use Reel No. 10 tape speed/9.5/19/38 cm Isolated loop mechanism Quartz Capstan direct drive by PLL method W456 × H443 × D257mm 23kg
Maintained! Compatible with a variety of applications, from 2-track 19/38cm recording and playback to 4-track 19/9.5cm playback. A popular model that employs Technics's own isolated loop method. The unique mechanism of single capstan and double pinch roller achieves stable driving performance. The rich sound that responds to hearing is unique to an open deck. The appearance may be dull or paint loss. Serial RG810445 (Satoshi Yonejima)
Maintenance information: 2022.4.17 Maintained (power supply board, 13 electrolytic capacitors replaced. Reel servo board, 11 electrolytic capacitors are replaced. Replace 10 capstan servo board electrolytic capacitors Replaced 3 electrolytic capacitors on the control board. Replaced 50 pieces of playback recording amplifier board bias circuit part electrolytic capacitor Lever switch contact cleaning, deformation correction, and knob replacement. REC level volume and output level volume cleaning treatment. Operation key lamp replacement procedure. Counter mechanism cleaning treatment, belt replacement. Tension roller cleaning, reversing roller disassembly cleaning. Head block cleaning and head changeover switch disassembly cleaning. Signal level check and adjustment for playback system and recording system. Each playback recording head cleaning, polishing treatment. Head housing part connector and harness replacement. (Self-recording and playback W &F (WTD) 0.02%)
Accessories: clamper
Main Specifications: 2 Tracks 2 Channels (Recording/Playback) 4 Tracks 2 Channels (Playback) Maximum Usage Reel No. 10 Tape Speed/9.5/19/38cm Isolated Loop Mechanism Quartz Capstan direct drive by PLL method W456 × H443 × D257 mm 23 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/3/9 sales price 198,000 yen Compatible with various uses from 2 track 19/38 cm re-recording to 4 track 19/9.5 cm playback. A popular model that uses Technics's unique isolated loop system. Stable driving performance is achieved with unique mechanisms such as single capstan and double pinch rollers. The rich sound that is satisfying to listen to is unique to open decks. The exterior has rust, bumps, and scratches. Serial RF707635 (Tamura Eiji)
Maintenance information: 2023.3.9 Maintained (counter mechanism disassembled, shaft oil applied and intermediate pulley shaft oil applied. The two capstan motor control circuit capacitors were replaced, and the contacts were cleaned by adjusting the PLL timing and detaching and disassembling the speed changeover switch. Head tilt (azimuth) is adjusted, playback level checks, recording bias LH (1), LH (2), LH (3) readjustment, recording level adjustment, and recording and playback tests using various tapes are good. LINE REC Level Adjustment Volume Cleaning Treatment and Oil Application) 2020.10.21 Maintained (AC plug replaced. Brake pad replacement/adjustment. The left tension arm detector microswitch was replaced due to poor contact. Capstan motor lock timing readjusted.) Head dirt and cleaning treatment around the pinch roller) 2018.12.5 maintenance completed (· head height regulation, head azimuth adjustment. Semi-fixed VR is replaced, and playback levels and frequency characteristics are checked and adjusted using reference tape. Print pattern repair procedure. headphone jack cleaning procedure. Playback level regulation adjustment/recording level regulation adjustment. (Brake adjustment treatment by making and replacing brake pads)
Accessories: copy of instruction manual
Main specifications: 2 tracks, 2 channels (recording/playback), 4 tracks, 2 channels (playback), maximum use reel 10, tape speed/9.5/19/38 cm, isolated loop mechanism, capstan direct drive by quartz PLL system, W456 x H443 x D257 mm, 23 kg