A rare cartridge that tuned up SPU-A in the Shindo Laboratory. The top mark has also been changed from ortofon logo to shindo swan. The sound is as refined as possible, clear and resilient to the designer's idea. Appearance has dullness (Satoshi Yonejima)
Maintenance information: 2021.8.8 operation confirmed
Accessories: original box
Main specifications: MC type 0.2mV Needle pressure 2.8 to 3.2 g Internal impedance 2Ω Load resistance 47kΩ self weight 31g
Scarce! Comes with original box! ROKSAN's highest-grade MC cartridge with unique refinements based on EMT's TSD-15. A skeleton type with no housing and an exposed power generation mechanism. The stylus uses a super fine line. It is in good condition (Sasaki Shota)
Maintenance information: 2024.2.23 Sound output operation confirmed
Accessories: original box
Main specifications: MC type output 0.21 mV load resistance 30 to 100 ohms internal impedance 24 ohms needle tip super fine line compatible needle pressure 2.2 to 2.5 g (2.3 g standard) dead weight 8.2 g
This is the first Ortofon cartridge to arrive in about 3 years. This model was produced in a limited edition of 1000 pieces to commemorate receiving the Cultural Merit Award from SPU developer R. Goodmansen. The large range and overflowing amount of information are taken into account while keeping the characteristics of SPU intact. The thickness and density of the midrange are appealing. There is oxidation and cracks in the needle cover. (MIURA Kimiya)
Maintenance Information: 2023.6.24 Operation confirmed
Accessories: original box, needle cover
Main specifications: Needle tip shape: 18 x 8 μm solid elliptical needle pressure range 3.0 to 5.0 g proper needle pressure 4.0 g frequency characteristics 20 Hz to 20 kHz dead weight 32 g
MC cartridges made to commemorate Mr. Per Windfeld's achievements. It was only produced based on MC Jubilee, and the gorgeous and exciting sound is attractive. The state has some dirt over time, but the cantilever is almost straight and has a relatively clean impression. Serial 740070 (Hiroki Yamato)
Maintenance information: 2021.11.13 Operation confirmed (sound sound is good)
Accessories: None* No needle cover
Main specifications: MC type output 0.3mV impedance 10Ω Appropriate needle pressure 2.6g own weight 13g frequency characteristics 10~80,000 Hz stainless steel alloy casting body boron cantilever
Arrived after a long time! An attractive cartridge with a strong sense of energy and quick response. It can musically express the overflowing amount of information brilliantly, and has advantages unique to high-end aircraft. There are small scratches on the exterior. Serial H2836 (Murakoshi Yoichi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: needle cover
Main specifications: MC type impedance 5.5 ohms needle pressure 1.6 g to 1.75 g dead weight 8.0 g output voltage 0.5 mV solid boron cantilever
*Needle cover is missing. 4N ultra pure silver coil It is a rare model that is rarely in stock among SPUs. It makes me feel the vivid and dynamic sound quality. There is slight oxidation on the exterior and metal parts (Murakoshi Yoichi)
Maintenance information: 2023.12.26 sound output confirmed
Accessories: none
Main specifications: MC type 4N ultra-pure silver coil output 0.32 mV needle pressure 3.0 to 5.0 g dead weight 32 g
An attractive cartridge with a strong sense of energy and quick response. The owner has the advantages unique to high-end machines, which can express the overflowing amount of information in a musical manner. There are small scratches on the exterior. Serial H3546 (Miura Kimiya)
Maintenance Information: 2022.10.22 Operation confirmed
Accessories: instruction manual, original box
Main specifications: MC type impedance 5.5 Ω needle pressure 1.6 g to 1.75 g dead weight 8.0 g output voltage 0.5 mV solid boron cantilever
Comes with original box! Japan Victor's highest peak cartridge MC-L1000 has arrived. Innovative cartridge directly connected to stylus and coil. The body is shaved out luxurious duralumin, and it feels reliable enough. Wide range and excellent clarity sound quality is one ideal for MC cartridges. The appearance is good without any bends. Serial 15002149 (Miura Kimiya)
Maintenance information: 2021.7.14 working confirmed
Accessories: original box, needle cover
Main specifications: Super Direct Couples MC-type Special Microridge Needle Output Voltage 0.22mV 30Ω Frequency Characteristics 10Hz to 50,000 Hz Suitable Needle Pressure 1.35 to 1.65g Self Weight 10.5g
It is a beautiful product that is rarely used! Mid and low frequencies with excellent contour and volume, beautiful mids and highs with natural harmonic content, and drifting air. The resolution, the sense of clarity and the amount of information are amazing. Both stylus and cantilever are good (Sasaki Shota)
Maintenance information: 2021.12.18 operation confirmed
Accessories: original box, manual
Main Specifications: Internal Impedance 20Ω Needle Pressure 2.2-2.5g Output Voltage 1mV Playback Frequency Range 20~30,000 Hz Self-weight 11g
Koetsu's popular cartridges. The body color is rosewood. The feeling that they have been carefully crafted one by one by a craftsman appears in a neat sound. It is also attractive that you can hear the sound of a solid core as the lines become thinner. The exterior is dull (Murakoshi Yoichi)
Maintenance information: 2022.11.8 sound output confirmed
Accessories: needle cover
Main specifications: MC type elliptical boron cantilever output voltage 0.36 mV needle pressure 1 g to 1.2 g playback frequency band 20-50,000 Hz channel separation 27 dB (1 to 20 kHz) internal resistance 5.5 Ω dead weight 10.5 g
Koetsu's popular cartridges. The body color is rosewood. The feeling that they have been carefully crafted one by one by a craftsman appears in a neat sound. It is also attractive that you can hear the sound of a solid core as the lines become thinner. The exterior is dull (Tetsuji Oikawa)
Maintenance information: 2022.12.4 operation confirmed
Accessories: none
Main specifications: MC type elliptical boron cantilever output voltage 0.36 mV needle pressure 1 g to 1.2 g playback frequency band 20-50,000 Hz channel separation 27 dB (1 to 20 kHz) internal resistance 5.5 Ω dead weight 10.5 g
MC cartridges from the premium audio brand Wilson Benesch, which has a reputation for carbon fiber products. It echoes natural, clear treble and powerful mid and low tones. Serial 5061 (Murakoshi Yoichi)
Maintenance information: 2023.6.13 sound output confirmed
Accessories: none
Main specifications: MC output voltage 0.3 mV needle pressure 1.8 to 2.0 g load resistance 10 to 47 kΩ internal impedance 25 ohms needle tip 7.6 x 17.7 μ own weight 8.0 g
Manufacturer adjusted! Comes with original box and is in good condition including needle tip. This photoelectric cartridge inherits the lineage of the company's flagship model Grand Master. What I immediately felt after listening to the audition was an overwhelming sense of resolution and transparency. The output is higher than the predecessor model, and the sound quality is not inferior to that of the flagship model, and excellent cost performance. *A dedicated optical equalizer is required for playback (Shota Sasaki)
Maintenance information: 2022.11.14 Manufacturer maintenance completed (readjusted)
Accessories: original box
Main specifications: photoelectric type 7.7g output voltage 70mV (1kHz) aluminum cantilever needle pressure 2.0-2.2g line contact needle
2022 manufacturer adjusted! Comes with the original box and is in good condition including the needle tip. A photoelectric cartridge that inherits the lineage of the company's flagship model Grand Master. What you feel right after listening to the audition is the overwhelming resolution and transparency. The output is higher than the predecessor model, and the sound quality is not inferior to the flagship model, and excellent cost performance. *A dedicated optical equalizer is required for playback (Sasaki Shota)
Maintenance information: 2022.11.14 manufacturer maintenance completed (re-adjusted)
Accessories: original box, instructions
Main specifications: photoelectric type 7.7 g output voltage 70 mV (1 kHz) aluminum cantilever needle pressure 2.0-2.2 g line contact needle
A special model that used 8N ultra-high purity copper for the first time in SPU history, sold in a limited edition of 500 pieces! By generously using precious 8N copper as a power generation coil, you can enjoy a modern SPU with an expanded range of high frequencies. Serial 178 (Kimiya Miura)
Maintenance information: 2023.3.16 operation confirmed
Accessories: needle cover
Main specifications: frequency characteristics 20 Hz to 25,000 Hz muku elliptical needle pressure 3.0 to 5.0 g recommended needle pressure 4.0 g recommended load impedance 10 ohms or more weight 32 g
Stereo MC cartridge for the 85th anniversary commemorative model of Ortophone. Released 500 pieces limited to the world. The winding material uses “AUCURUM (AUCURUM),” a 30-micron two-layer wire covered with 4N24 karat pure gold on the outside of the high-purity 6N copper wire, and the head housing is heavy, but the fibers are dense, and resilient We use beech wood, which is also rich in. The appearance is not bent in the cantilever and the needle tip is also good. Serial 359 (Nobuyuki Takahashi)
Maintenance information: 2021.12.9 operation confirmed (good sound output)
Accessories: needle cover
Main specifications: MC type output voltage 0.4mV frequency characteristic 20Hz to 20kHz needle pressure range 3~4g (3.5g suitable) dead weight 30g
One owner item! SPU synergy with the highest output in the SPU lineup. Using a G-shell containing neodymium magnets and zinc powder, it combines a modern, energetic sound with a rich sound typical of an orthophone. The stylus is good (Oikawa Tetsuji)
Maintenance information: 2023.12.28 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output voltage 0.5 mV diamond oval needle frequency characteristics 20 to 20,000 Hz needle pressure 3 g dead weight 30 g
The price has been reduced! 2023/12/2 sales price 178,000 yen, a special model using 8N ultra-high purity copper for the first time in SPU history, sold in a limited edition of 500 pieces! By generously using precious 8N copper for power generation coils, you can enjoy a modern SPU with an expanded high frequency range. There is no needle bending, etc., but there is some oxidation. Serial 080 (Miura Kimiya)
Maintenance information: 2023.12.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: frequency characteristics 20 Hz to 25,000 Hz output 0.3 mV Muku oval needle pressure 3.0 to 5.0 g, recommended needle pressure 4.0 g, recommended load impedance 10 Ω or more, weight 32 g
Disposal prices have been reduced. Member discounts are not applicable. 2022/11/10 sales price 250,000 yen It is a dynamic, delicate and elegant sound that uses a phantom MC cartridge, strong magnet+metal body. Delicate yet elegant, high-quality high frequencies. It reproduces the way it sounds both hard and soft, with plenty of scale in the low frequencies. There are screw scratches and slight dullness on the body (Kanai Hidetsugu)
Maintenance information: 2022.11.8 sound output confirmed
Accessories: needle cover
Main specifications: Output voltage 0.4 mV Playback frequency 20 Hz to 100 kHz Impedance 5.5 Ω Needle pressure 1.8 to 2.0 g dead weight 12 g
※The original box and accessories are missing. 4N ultrapure silver coil It is a rare model that is rarely in stock even among SPUs. It makes me feel the sound quality is vivid and dynamic. The cover on the coil part is missing and is in a bare state. ※There is no hindrance to operation (Fujisawa Yukishi)
Maintenance information: 2023.3.16 operation confirmed
Accessories: none
Main specifications: MC type 4N ultra-pure silver coil output 0.32 mV needle pressure 3.0 to 5.0 g own weight 32 g