Dedicated transformer optimized for DL-103. Set the transformer by making the body completely independent of the thick solid carved body, and you can enjoy a beautiful sound with a sense of transparency in combination with direct wiring from the input terminal to the transformer body. The appearance has a feeling of use such as dullness. (Nobuyuki Takahashi)
Maintenance Information: 2022.5.13 Operation confirmed
Accessories: None
Main specifications: MC transformer boost ratio 1:10 Compatible impedance 3 to 40 Ω Dimensions W135 × H52 × D102 mm dead weight 1.3 kg
The price has been reduced. 2021/9/26 selling price 49,800 yen The MC step-up transformer, which was first developed as a shelter, has arrived for the first time in a long time. Uses a toroidal transformer The feature is that a large diameter copper wire is wound around the ring core of a super permalloy alloy in a toroidal manner. The sound quality is clean and has little coloring, and is recommended for those who listen to classical music. The appearance has a feeling of use over time, and there is quite a bit of dirt (Kondo Hirotsugu)
Maintenance Information: 2021.9.26 Operation confirmed
Accessories: none
Main specifications: Primary impedance 10Ω or less Load impedance 47K to 50kΩ Boost ratio 33DB (× 50) Input: RCA1 system W120 × H60 × D138mm Weight 1.0 kg
MC step-up transformer for low impedance ideal for MC20 with low output etc. It can also be matched to SPUs, etc. The thick middle range is excellent for listening. Input/output is one system, but since it can be bypassed, it is a convenient design that can be used by switching both MM/MC (Atsushi Takasaki)
Maintenance information: 2022.5.5 sound confirmed
Accessories: None
Main specifications: boost ratio 32dB (3Ω) primary impedance 2-4Ω toroidal transformer W80 × H40 × D130mm 600g
An easy-to-use step-up transformer with 3 input systems and 3 types of impedance selectable in addition to PASS. It is simple and polite, and it lifts up obediently and firmly with a well-balanced and precise sound quality. The appearance is dull. Serial 100965 (Satoshi Yonejima)
Maintenance information: 2022.4.30 operation confirmed
Accessories: No accessories
Main specifications: Primary impedance 3/10/40 ohm switching bypass possible input 3 systems W130 × H70 × D186 mm 2 kg
A step-up transformer made by Western Sound Ink using a VIEWLEX transformer. It seems to be for high impedance such as the DENON DL-103. I auditioned it with ortofon SPU-GE, but it was a fine and thick sound (Yoichi Murakoshi)
Maintenance information: 2022.5.6 sound confirmed
Accessories: None
Main specifications: primary side 50Ω, secondary side 75KΩ
* Currently sold products. FR's MC step-up transformer using a toroidal core. Create a natural sound that makes it easy to understand the characteristics of cartridges. In addition to switching impedance of 10 to 30 ohms, there is also a bypass position, so it can be used for a variety of cartridges without taking up space. There are dullness and scratches on the appearance. (Eiji Tamura)
Maintenance Information: 2022.3.31 Maintained (Hex nut re-tightened. (Voice check OK)
Accessories: No accessories
Main specifications: Impedance 10Ω/30Ω/PASS Playback frequency band 20Hz to 30kHz W64 × H64 × D105 mm Approx. 455g
It's been maintained! A classic MC step-up transformer. With 2 input systems, impedance 3.40 ohm switchable, and a PASS line, you can freely enjoy various cartridges and tone arms. The appearance is dull over time, and there are small scratches. (Yuki Yamato)
Maintenance Information: 2022.4.30 Maintained (RCA terminals, output cable, insulator replacement. (Re-polished switching SW decomposition contacts, applied grease to prevent oxidation and sulfide.)
Accessories: copy of instruction manual
Main specifications: MC boost transformer input 2 systems switchable Primary impedance 40Ω/3Ω switching Secondary impedance 4kΩ Boost ratio 1:10 Frequency characteristic 10Hz to 100kHz W97 × H65 × D155mm 800g
A classic MC step-up transformer. The input impedance can be switched to 3/40 ohms, and since it has a PASS line, there is no need to change the connection of the cable when the cartridge is changed to mm. The thick and rich tone unique to this era is attractive. The overall appearance is dull and there are small scratches. The root coating of the cable is torn (Wang Exhibition)
Maintenance Information: 2019.4.22Maintained (output cable, RCA terminals, insulator replaced. Re-polish SW decomposition contacts, apply grease to prevent oxidation and sulfide. (Input/output waveform confirmation, sound output test)
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable Primary impedance 40Ω/3Ω switching Secondary impedance 4kΩ Boost ratio 1:10 Frequency characteristic 10Hz to 100kHz W97 × H65 × D155mm weight 800g
* The cable has been replaced due to maintenance. MC step-up transformer optimized for SPU. The sound creation, which is slightly distorted by a small transformer, embodies splendid music playback by connecting the SPU. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2022.3.26 Maintained (output part rubber bush deterioration replacement, cable with RCA terminal replaced, input/output characteristic check no abnormality)
Accessories: Original box for STM72Q
Main specifications: Input impedance 2Ω to 3Ω boost ratio 60 times weight 70g
RCA terminals have been replaced! Fidelity-Research step-up transformer A multifunctional step-up transformer that can be switched from 3Ω to 100Ω, has 3 inputs and PASS, and can also be used as a selector for multiple record players. Each gain is equipped with an independent toroidal transformer. The exterior is dull (Sasaki Shota)
Maintenance information: 2022.4.25 maintained (RCA terminal replacement. Switched SW decomposition contacts are polished again, and oxidation/sulfide prevention grease is applied. (I/O waveform check, sound output test.)
Accessories: None
Main specifications: step-up transformer core type/toroidal core input impedance 3Ω, 10Ω, 30Ω, 100Ω, PASS (switching) load impedance 47kΩ ~ 57kΩ frequency characteristic 20Hz ~ 30000Hz W170×H60×D180mm 1.2kg
Cotter's most popular MARK2 TYPE L. This is an MC step-up transformer for low impedance such as orthophones. The strong, fresh tone is attractive using a strong sealed case and silver wire. It goes perfectly with SPUs, etc. The transformer itself is different from P/PP/S. RF Enterprise regular import model. * Silver wire is easy to break, so please handle it with care (Yoichi Murakoshi)
Maintenance information: 2022.4.19 sound output confirmed
Accessories: None
Main specifications: Primary impedance 1 to 6 ohms Silver wire triaxial output cable adopted Size W76 × H55 × D150 mm Approx. 1.3 kg
Maintained! A must-see item for SPU fans It is a model loaded with two JS transformers of Type0.32m/No.6600, and the characteristics of the Ortofon/SPU system are fully drawn out, and the depiction of vividness rich in thickness and stickiness is wonderful. Appearance, dullness, and small bruises can be seen (Hitoshi Kobayashi)
Maintenance information: 2022.4.20 Maintenance completed. Replace RCA terminals and repolish SW disassembly contacts. Check input/output waveform
Accessories: None
Main specifications: Boost ratio 31 times primary impedance 1.5Ω/secondary impedance 1.5kΩ Dimensions W90 × H65 × D80mm Weight approx. 400g
This step-up transformer is ideal for SPUs, etc. This MC transformer is excellent in thickness and energy, and brings out the characteristics of the cartridge to the fullest. The degree is good (Fujisawa Yukishi)
Maintenance information: 2022.4.17 operation confirmed
Accessories: instruction manual, original box
Main specifications: Input impedance 2 ~ 6 Ω Boost ratio 28 dB Load impedance 47 kΩ or more Channel separation 80 dB (1 kHz) Dimensions W80 × H40 × D128 mm Weight 400g
* Currently sold items. Orthophone standard MC transformer. When combined with MC ☆ 10W, etc., you can enjoy clear, up-tempo sound. There is a small scratch on the corner (Sasaki Shota)
Maintenance information: 2022.4.17 sound output tested
Accessories: None
Main specifications: Frequency characteristics/15Hz to 50kHz input impedance/2-6Ω boost ratio 28dB W80 × H58 × D130mm 0.8kg
An easy-to-use step-up transformer with 3 inputs and 3 impedance types other than PASS. It is simple and carefully made, and it lifts up obediently and firmly with well-balanced and precise sound quality (Yoichi Murakoshi)
Maintenance information: 2022.4.1 sound output confirmed
Accessories: None
Main specifications: Primary impedance 3/10/40 ohm switching bypass possible 3 input system size W130 × H70 × D186 mm 2kg
Step-up transformer for MC cartridges This model is the culmination of Orthophone's transformer technology. There are no noticeable scratches or stains on the exterior, but the original box is dull and dirty (Sasaki Shota)
Maintenance information: 2022.4.8 Sound output operation confirmed
Main specifications: Input impedance 2 to 6 Ω boost ratio 26dB W140 × H86 × D102 mm 1.3kg
* Currently sold items. A limited edition model commemorating the 15th anniversary of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as a DL-103 T2 at the time, and it has a solid skeleton and a thick sound. There are dullness and small scratches (Hiura Katsutsugu)
Maintenance information: 2022.4.9 operation confirmed
Main specifications: Frequency band 20Hz to 70kHz 40Ω crosstalk 60dB or more W92 × H55 × D145mm 720g
This is an MC boost transformer for low impedance, which is ideal for MC20 with low output. It can also be matched with SPUs, etc. The thick mid-range is excellent for listening. The input/output is 1 system, but since it can be bypassed, it is a convenient design that can be used by switching both MM/MC (Itsuro Mizushima)
Maintenance information: 2022.4.8 operation confirmed
Accessories: None
Main specifications: boost ratio 32dB (3Ω) primary impedance 2-4Ω toroidal transformer external dimensions W80 × H40 × D130mm own weight 600g
Orthophone MC step-up transformer It is a model that inherited the basic sound quality, good cost performance, and space saving of the previous ST-5, and realized a very clear and wide-range sound (Yoichi Murakoshi)
Maintenance information: 2022.3.29 sound output confirmed
Accessories: original box, instruction manual
Main specifications: Frequency characteristic 15 to 45 kHz (+0dB-2.5dB) Boost ratio 24dB (47kΩ/1kHz) Compatible cartridge impedance 2Ω to 60Ω Load impedance 47kΩ Channel Balance 0.5dB Channel Separation 70dB (1kHz) W122 × H43.5 × D102 mm Weight 790g
A step-up transformer for SPUs from the 1990s Orthophone. The core is carefully selected from specially ordered Haimu Super Permalloy with high initial magnetic force. If it is low impedance, it is compatible with various cartridges (Yoichi Murakoshi)
Maintenance information: 2022.3.26 sound output confirmed
Accessories: None
Main specifications: Input impedance 1Ω to 6Ω Boost ratio 26dB Frequency characteristic 10Hz to 100kHz Load impedance 47kΩ or more Size W150 × H108 × D112 mm Weight about 1.7kg
Transformers optimized for the MC30S It brings out the original flavor of the cartridge with a polite sound. It comes with a rare original box (Yoichi Murakoshi)
Maintenance information: 2022.3.26 sound output confirmed
Accessories: original box
Main specifications: double shielded left and right independent transformer input impedance 2 ~ 6 Ω size: W100 × H60 × D130mm Weight: 1.5kg
※There is no case bottom plate. It is a TYPE 0.32M No.41 step-up transformer of Denmark JS (Jorgen Schou). It has a fairly high boost ratio and is excellent compatibility with SPUs. It is recommended for use with vintage amplifiers. Figure It has a thick middle range and depth, and it makes me listen to an astringent taste with guts. The impression is that the center of gravity is solid. Comes with a PASS switch that can also switch MM cartridges (Fujisawa Yukishi)
Maintenance information: 2022.3.17 operation confirmed
Main specifications: Boost ratio 31 times with bypass function Primary impedance 1.5Ω/Secondary impedance 1.5kΩ Size W90 × H65 × D88mm (actual measurement) Weight 300g (actual measurement)
L type that strengthened the shield of Denmark's famous Transformer JS No.6600. The strong shield overcomes weaknesses that make it easy to pick up hum due to its high boost ratio. It is ideal for SPUs with weak output and the old MC series. The rich tone is excellent. Appearance, there are dents on the corners of the side, line scratches on the top plate, and dullness (Yoichi Murakoshi)
Maintenance information: 2022.3.16 sound output confirmed
Accessories: None
Main specifications: Primary impedance 1.5Ω Secondary impedance 1.5kΩ With bypass switch for boost ratio 1:31 MM
A rare item! Comes with original box It is TYPE 0.32M No.384 of Danish JS (Jorgen Schou). MC transformer with low step-up ratio suitable for Ortofon CG25D and CA25D mono needle. You can enjoy a tone that is even denser and richer than modern orthophones. The appearance has small scratches and dullness corresponding to the model year (Oikawa Tetsuji)
Maintenance information: 2022.3.13 operation confirmed
Accessories: original box
Main specifications: Primary impedance 1.5Ω Secondary impedance 200Ω
L type that strengthened the shield of Denmark's famous Transformer JS No.6600. The strong shield overcomes weaknesses that make it easy to pick up hum due to its high boost ratio. It is ideal for SPUs with weak output and the old MC series. The rich tone is excellent. The appearance has a feeling of use such as repair marks and dullness on the top plate. (Asa Tomoho)
Maintenance information:2022.3.17 Operation confirmed
Accessories: original box
Main specifications: Primary impedance 1.5Ω Secondary impedance 1.5kΩ With bypass switch for boost ratio 1:31 MM
It is a TYPE 0.32M No.41 step-up transformer of Denmark JS (Jorgen Schou). It has a fairly high boost ratio and is excellent compatibility with SPUs. It is recommended for use with vintage amplifiers. Figure It has a thick middle range and depth, and it makes me listen to an astringent taste with guts. The impression is that the center of gravity is solid. Comes with a PASS switch that can also switch the MM cartridge. The bottom of the case has been changed to a mesh metal plate (Tetsuji Oikawa)
Main specifications: 31 times boost ratio with bypass function Primary impedance 1.5Ω/Secondary impedance 1.5kΩ Size W90 × H68 × D88mm (actual measurement) Weight 420g (actual measurement)
It is the best match transformer for the company's DL-S1 and DL-103 series. You can enjoy the thickness and luster of the clear and natural sound. With the large amount of information unique to high-end machines, it draws out even the smallest details of the character of the cartridge. There are dullness and small scratches (Sasaki Shota)
Maintenance information: 2022.3.13 sound output test OK
Accessories: Nothing
Main specifications: 6N wiring material use compatible impedance 3 ~ 40 Ω 10 ~ 80,000 Hz Boost ratio 1:13 W150 × H70 × D175mm 3.2kg
A classic MC step-up transformer. With 2 inputs, 3 and 40 ohms of impedance switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. Are there rust floats on screws and top plates (Oikawa Tetsuji)
Maintenance information: 2022.2.20 operation confirmed
Accessories: None
Main specifications: MC boost transformer input 2 systems switchable Primary impedance 40Ω/3Ω switching Secondary impedance 4kΩ Boost ratio 1:10 Frequency characteristic 10Hz to 100kHz W97 × H65 × D155mm 800g
One owner's product! It's been a long time since it's been in stock! Denon's finest step-up transformer developed for the DL-1000A. It reproduces majestic sound quality with a sense of scale from a heavyweight cast iron body. There are some small scratches (Fujisawa Yukishi)
Maintenance information: 2022.3.10 operation confirmed
Accessories: instruction manual, connection cord
Main specifications: 30Ω (compatible 10 to 40) boost ratio 11.5 W180 × H113 × D255mm 12kg
The price has been reduced. 2022/1/30 Selling price 29,800 yen* It is inexpensive because there are abrasions and modifications. This is a step-up transformer (Type L version) for low impedance MC cartridges of FR. There is a sense of clarity, and the straight sound is attractive. The input terminal is replaced with a gold-plated terminal, the output cable is removed, and the gold-plated terminal is installed. There are abrasions on the top plate, paint peeling, and there is a feeling of use on the whole (Yoichi Murakoshi)
Maintenance information: 2022.1.23 sound output confirmed
Accessories: none
Main specifications: Input impedance 3 Ω or less, Output impedance 47 ~ 50 kΩ W158 × H60 × D120mm 2.1kg
* The cable has been replaced due to maintenance. MC step-up transformer optimized for SPU. The sound that is slightly distorted with a small transformer embodies the splendid music playback by connecting the SPU. The exterior has paint peeling and dullness (Sasaki Shota)
Maintenance information: 2021.9.9 Maintained (Board pattern modified. RCA plug plug cord replacement (Cord stopper replacement)
Accessories: nothing
Main specifications: Input impedance 2Ω to 3Ω boost ratio 60 times weight 70g
Self-made MC transformer using DOK IPT-105. It is cased in a 1550B made by HAMMOND. For high output cartridges such as DL-103 and XSD-15. The resolution is also high, and the growth of the low frequency is not bad (Fujisawa Yukishi)
Maintenance information: 2022.3.4 operation confirmed
Accessories: None
Main specifications: W115 × H63 × D63mm 0.2kg (actual measurement)
※ It is cheap because there are scratches. This transformer is the best match for the company's DL-S1 and DL-103 series. You can enjoy the thickness and luster of a clear and natural sound. The amount of information unique to a luxury machine brings out the details of the character of the cartridge. There are several scratches on the body (Fujisawa Yukishi)
Maintenance information: 2022.3.4 operation confirmed
Accessories: None
Main specifications: Using 6N wiring material Compatible impedance 3 to 40 Ω 10 to 80,000 Hz Boost ratio 1:13 W150 × H70 × D175mm 3.2kg
* Currently sold goods. A limited edition model for the 15th anniversary of the famous machine DL-103 cartridge. It was a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it had a solid, thick sound. There are dullness and small scratches (Sasaki Shota)
Maintenance information: 2022.3.1 sound output operation confirmed
Accessories: None
Main specifications: Frequency band 20Hz~70kHz 40Ω Crosstalk 60dB or more W92 × H55 × D145mm 720g
A model that has refined the sound quality by following the numerous know-how cultivated in the high-end model T-550. Equipped with MM/MC switching SW to make it easier to use. Uses the same 10mm thick aluminum slant panel as the T-550, for clear, high-resolution sound without fogging. Serial T322107059 (Itsuro Mizushima)
Maintenance information: 2022.2.26 operation confirmed
Accessories: instruction manual, original box
Main specifications: Usable cartridge output impedance 1.5 to 40 Ω Load impedance 47 kΩ Boost ratio (voltage gain) 26 dB W136 × H92 × D134 mm 1.3kg
The price has been reduced. 2022/2/4 selling price 25,000 yen Audio-Technica's masterpiece transformer. The left and right independent transformers are shielded with a permalloy case. Impedance can be switched to 3, 20, 40 Ω. It is a nice point that the 20Ω is installed. I can feel a slight feeling of use (Yoichi Murakoshi)
Maintenance information: 2022.2.1 sound output confirmed
Accessories: none
Main specifications: MC switching type step-up transformer Primary impedance 3/20/40 ohm switching bypass possible Dimensions W110 × H65 × D150 mm Weight 920g
MC step-up transformer It features a body structure that thoroughly eliminates magnetic noise. The sound is fresh and smooth. The range is also wide and has a relaxed, high-quality sound quality. The appearance is dull. Serial T30901061 (Miura Kimiya)
Maintenance information: 2022.2.27 operation confirmed
Accessories: No accessories
Main specifications: Compatible cartridge impedance 1.5 ~ 40 Ω load impedance 47 kΩ boost ratio 26 dB W133 × H85 × 129 mm 1kg
L type that strengthens the shield of the Danish name Transformer JS No.6600. A strong shield overcomes weak points that are easy to pick up hum due to the high boost ratio. It is ideal for SPUs with weak output and the old MC series. The dense tone is excellent. The appearance is dull. (Satoshi Yoneshima)
Maintenance information: 2022.2.20 operation confirmed
Accessories: No accessories
Main specifications: Primary impedance 1.5Ω Secondary impedance 1.5kΩ Boost ratio 1:31 MM with bypass switch
It is the highest peak of step-up transformer along with cotter, TH-9708. The detailed, glossy, and deep sound is the true value of analog playback. There are scratches and paint peeling on the exterior. Serial 901027 (Satoshi Yonejima)
Maintenance information: 2022.2.20 operation confirmed
Accessories: original box
Main specifications: Primary impedance: LOW 3Ω Size W16.5×H12×D10cm Self-weight 2.75kg
※ Because there are many scratches, it is cheap. Comes with an original box. Orthophone's step-up transformer T-1000, which will be in stock for the first time in about 7 years. It is the best match with the company's MC cartridges such as MC ☆ 30W and MC ☆ 20W. There are small scratches and abrasions on the whole (Tetsuji Oikawa)
Maintenance information: 2022.2.20 operation confirmed
Accessories: original box, instruction manual
Main Specifications: Boost Ratio 26dB Input Impedance 2Ω to 6Ω Load Impedance 47KΩ Frequency Characteristics: 10Hz to 100kHz W120×H68×D150mm 1.8kg
Fidelity-Research step-up transformer A multifunctional step-up transformer that can be used as a selector for multiple record players, while being capable of switching from 3Ω to 100Ω, has 3 inputs and PASS. An independent toroidal transformer is installed for each gain. The appearance is dull (Oikawa Tetsuji)
Maintenance information: 2022.2.20 operation confirmed
Accessories: none
Main specifications: boost transformer core type/toroidal core input impedance 3Ω, 10Ω, 30Ω, 100Ω, PASS (switching) load impedance 47kΩ ~ 57kΩ frequency characteristic 20Hz ~ 30000Hz W170×H60×D180mm 1.2kg
MC step-up transformer dedicated to EMT's XSD15/TSD15. The thickness and fineness of the mid-range are excellent. The appearance has dirt and dullness (Satoshi Yoneshima)
Maintenance information: 2022.2.20 operation confirmed
Accessories: No accessories
Main specifications: 927Dst/930Dst built-in transformer use primary impedance 85 ~ 175 Ω secondary 10 kΩ boost ratio 1:10 W123 × H39 × D63mm 240 g
The price has been reduced. 2022/2/12 Selling price 59,800 yen A high-performance step-up transformer with a special winding structure. Furthermore, a perfectly balanced input unit and a high-rigidity chassis realize smooth sound quality with a lot of delicate information. Serial T51407048 (Itsuro Mizushima)
Maintenance info: 2022.2.12 operation confirmed
Accessories: original box
Main specifications: Compatible cartridge output impedance 1.5~40Ω Load impedance 47kΩ Boost ratio (voltage gain) 26dB Frequency characteristics 10~50kHz W174×H88×D168mm 2kg
The standard DENON step-up transformer is now in stock! It is especially recommended for those who use the DL-103! Since you can switch between two inputs, it is very convenient for people with double arms, etc. The overall appearance has a feeling of use and there is fraying in the cable. Input 2 systems, 3/40 ohm switchable, with PASS The cable is being replaced with an external product (Murakoshi Yoichi)
Maintenance information: 2021.11.9 operation confirmed
Accessories: None
This is an MC boost transformer for low impedance that is ideal for MC20 with low output. It can also be matched with SPU etc. The thick mid-range is excellent for hearing. It is a convenient design that can be used by switching both MM/MC because it can be bypassed although the input and output are one system. There are small scratches and dullness corresponding to the year (Tetsuji Oikawa)
Maintenance information: 2021.12.9 operation confirmed
Accessories: none
Main Specifications: Boost Ratio 32dB (3Ω) Primary Impedance 2-4Ω Toroidal Transformer Outer Dimensions W80 × H40 × D130mm Self Weight 600g
Designed to work with high quality MC transformers and 3 types of MC cartridges. The sound quality is crystal clear, but the reproduction of the mid and low frequencies is also rich, and it is very pleasant to listen to. The appearance is somewhat dull (Oikawa Tetsuji)
Maintenance info: 2022.2.12 operation confirmed
Accessories: none
Main specifications: winding ratio LOW 30 times MID 15 times HIGH 10 times Compatible impedance LOW 1 to 10 Ω MID 10 to 30 Ω HIGH 30 to 50 Ω load impedance 47 kΩ or more (amplifier side load resistance) Frequency characteristics 20 to 30 kHz (±0.5 dB) External dimensions W130 × H92 × D177 mm Weight 850 g