Diamond tone wooden speaker stand In addition to the normal setting, it is possible to set a setting that keeps the angle waiting by upside down. Fits mid-size speakers such as the DS-77 and DS-1000 Overall there is a feeling of use such as scratches and dullness (Mizushima Itsuro)
Accessories: none
Main specifications: W330 × H200 × D320mm Weight 3.4kg
A speaker stand that controls vibration suppression and vibration adjustment in a well-balanced manner. Black metallic finish It brings out the clear, speedy sound that is characteristic of a small speaker, and the original performance of the speaker. There are small scratches and line scratches (Oikawa Tetsuji)
Accessories: Spike, spike holder, tool
Main specifications: Top plate W174 × D260mm Bottom plate W250 × D300mm Height 600mm (including spikes) 9kg/1 unit
Unspecified speaker stand. It is very similar to the Hamilex SB-983, but the size is slightly larger. There are dullness and small scratches (Oikawa Tetsuji)
Accessories: screws
Main specifications: W380 × H500 × D340 top plate W280 × D300mm
A speaker stand recommended for small bookshelves. There is dullness (Oikawa Tetsuji)
Accessories: spikes, instruction manual
Main specifications: W285 × H665 × D285mm top plate W183 × D183mm
* It is inexpensive because there are no spikes. A speaker stand that represents Nord Stone. Type 2, and the strut design has been changed to 2 (Yoichi Murakoshi)
Accessories: none
Main specifications: Load capacity 50 kg W250 × H600 × D250 mm Top plate W165 × D220mm 5.5 kg
A sturdy and stable speaker stand. The size is just right for medium-sized speakers such as the NS-1000M. By changing the direction of the inner plate, the width can be selected from 300mm and 350mm. The appearance is generally good (Yoichi Murakoshi)
Accessories: none
Main specifications: W350 × D300 × H247mm Approximately 6 kg/book
Heavyweight stand perfect for JBL mid-size speakers. It has three pillars and a steel plate that is resistant to vibrations and supports clear sound reproduction. Best match for 4429, 4319, 4312 series, etc. There are many scratches on the pillars and foundation parts in the exterior. Also, there are scratches and dirt on the top plate (Ryo Mizusaki)
Accessories: spike, spike receiver
Main specifications: Steel bottom plate dimensions W440 × H400 × D370mm (excluding spikes) Top plate dimensions W360 × D293mm Weight 26 kg/this
Set of 4 standard bases from TAOC. Made of high carbon cast iron with excellent vibration treatment ability. It can be used in a wide range of speakers from large to medium-sized, and reproduces sound images accurately and tightly. The appearance has a feeling of use such as scratches and dullness. (Morning Tomoho)
Main specifications: W100 × H200 × D300mm Weight 9.2 kg/1 bottle
Unspecified hanging bracket. Matched with BOSE 101MM screw holes (operation and safety are not guaranteed). With angle adjustment function (Yoichi Murakoshi)
Accessories: none
Main specifications: 110×146×110mm
The price has been reduced! 2022/1/31 Sales price 7,000 yen A speaker stand for the company's S-55TWIN. It is a size that can be useful for other small speakers and medium-sized speakers. The appearance is dull due to aging. There are small scratches (Aso Hiroki)
Accessories: none
Main specifications: W310 × H498 × D350mm Weight 5.8kg
FAPS speaker suspension system. The result of pursuing “thinner” and “lighter” came into shape. It produces a sound that can be said to be dramatic due to thorough weight reduction. The appearance has a feeling of use over time such as scratches, dullness, and rubbing. (Morning Tomoho)
Accessories: tools
Main specifications: Height to the bottom of the stationary speaker about 60 cm (variable range: 60 to 46 cm) Size W280 × H600 × D270 mm (actual measurement) Weight 1.4 kg
The price has been reduced! 2022/1/29 selling price 29,800 yen FAPS speaker suspension system. The result of pursuing “thinner” and “lighter” came into shape. It produces a sound that can be said to be dramatic due to thorough weight reduction. The appearance has a feeling of use over time such as scratches, dullness, and rubbing. * Speaker side 5-point support system (Asasachi method)
Accessories: none
Main specifications: Height to the bottom of the stationary speaker about 60 cm (variable range: 60 to 46 cm) Size W280 × H600 × D270 mm (actual measurement) Weight 1.4 kg
It is a JBL speaker stand that has few stocks. The grain of the wood is very beautiful. Would you like to go with a compact bookshell or the 4312 series you have? Slight scratches are scattered throughout the appearance and some chips are seen. (Aso Hiroki)
Accessories: none
Main specifications: Size W270 × H512 × D350mm Top plate W220 × D245mm Weight 4.8kg (actual measurement)
FAPS speaker suspension system. The result of pursuing “thinner” and “lighter” came into shape. It produces a sound that can be said to be dramatic due to thorough weight reduction. The appearance has a feeling of use over time such as scratches, dullness, and rubbing. (Morning Tomoho)
Accessories: tools
Main specifications: Height to the bottom of the stationary speaker about 60 cm (variable range: 60 to 46 cm) Size W280 × H600 × D270 mm (actual measurement) Weight 1.4 kg
※ spike shortage. It is a stand dedicated to the Nautilus 805. If you have a Signature805, 805S, 805 Diamond you are in perfect condition. It is a stand with good sound quality with a sense of stability (Fujisawa Yukishi)
Accessories: none
Main specifications: size W278 × H594 × D374mm Weight 8kg/unit
Speaker stand for STELLA HARMONY It is attractive because it makes you feel good in strength and its height that is easy to use. There are fine paint peeling and repairs on the bottom and sides (Yoichi Murakoshi)
Accessories: Speaker mounting screws
Main specifications: Top plate W155 × D238mm Bottom plate W250 × D305mm Height 570mm 6.72kg
A sturdy and stable speaker stand. The size is just right for medium-sized speakers such as the NS-1000M. By changing the direction of the inner plate, the width can be selected from 300mm and 350mm. There are some scratches on the exterior. (Morning Tomoho)
Accessories: none
Main specifications: W350 × D300 × H247mm Approximately 6 kg/book
Dedicated stand for Sonus faber MINIMA. Italian walnut wood is assembled and the base is made of marble, which is a specialty of the Tuscany region, for an outstanding sense of stability. There is paint loss on the top (Murakoshi Yoichi)
Accessories: none
Main specifications: Height: about 600mm Top plate: W170 × D200mm Bottom plate: W320 × D320mm 15kg/book
Arrived with unassembled products! YAMAHA's NS-1 dedicated stand. It is a sturdy structure with a reasonable height. It can be used with speakers of the same size without problems. The lid of the original box has been unpacked, but assembly is not checked with the cushioning material of the product intact. There is pain in the original box. (Yuki Yamato)
Accessories: original box screws
Main specifications: Top plate size W165 × D230mm Bottom plate size W275 × D350 mm Height 481mm Weight 6.0kg
A self-made speaker stand. The structure is solid and can be used for small bookshelves such as BOSE. Although processing is required on the speaker side, there are fixed screw holes, and screws are also included. There are small scratches and dirt on the whole appearance (Sasaki Shota)
Accessories: screws
Main specifications: W147 × H335 × D247mm 1.3kg (actual measurement)
Speaker stand for Scepter 1001 Onkyo's proprietary laminated reinforced wood is used, which is impregnated with resin into each cherry veneer that has sufficient density and strength as it is, and compressed to about half the thickness by a heat molding press machine. The appearance has line scratches and scratches on the speaker installation surface, and there is a feeling of use on the whole (Ryo Mizusaki)
Accessories: None
Main specifications: W398 × H207 × D370mm 8.0kg/book
The price has been reduced. 2021/12/30 selling price 45,000 yen A speaker stand that is perfect for B&W 805D3. Mounting screws are included to prevent dropping It achieves a beautiful sound with subtlety and resonance. Comes with an insulator for acoustic adjustment No emblem (Yoichi Murakoshi)
Accessories: Insulator, Spike, Mounting Screws
Main specifications: W258 × H600 × D347mm 22kg/1 bottle
By adopting a complex shape (double cylindrical shape), which is the first in the world for magnesium extrusion, it achieves tremendous strength and vibration absorption while being the most ideal slender strut in terms of sound quality. Furthermore, in order to remove unnecessary resonance and resonance, we fill the inside of the double cylinder with ultra-fine sand to reproduce the ideal sound field space (Atsushi Takasaki)
Accessories: none
Main specifications: Top plate W13 cm × D18 cm Bottom plate W22 cm × D27 cm Height 60 cm Weight 5.3 kg/book Load capacity 30 kg or less
Stand for SOLO by PLATINUM. With an amazing weight of just under 40 kg, the stand alone promises an outstanding sense of stability and tightness in the low range. Great for heavy bookshelf speakers There are small scratches and dullness (Sasaki Shota)
Accessories: spikes
Main specifications: Top plate W170 × D184mm Bottom plate W290 × D400mm Height 587mm 38.9kg/1 unit (actual measurement)
I have opened the unopened package for confirmation. A reasonably priced speaker stand from Hayami Kosan. It is designed for installation of small speakers. Because it is lightweight, it is easy to change the location of the stand, and it is easy to use (Yoichi Murakoshi)
Accessories: original box, instruction manual
Main specifications: Bottom plate dimensions W230 × H450 × D295mm Top plate dimensions W190 × D230mm Weight 4kg/book
The price has been reduced. 2021/11/25 selling price 35,000 yen. The speaker stand for HL COMPCT7 from Harves is a rare stock alone. There are insulators on the top and bottom so that the speaker floats a little. If the size matches, it seems to be good for European speakers that place importance on sound. There is some rubbing on the bottom plate corner (Yoichi Murakoshi)
Main specifications: W330 × H405 × D370mm top plate W274 × D299mm 6.8kg
The price has been reduced! 2021/12/27 Selling price 24,000 yen Magnesium alloy prop and top plate are aluminum and steel plywood. Perfect for small bookshelf speakers The appearance has a feeling of use such as small scratches and dullness. (Morning Tomoho)
Accessories: spikes
Main specifications: Top plate W160 × D210mm Bottom plate W220 × D270mm Height 600mm 8.0kg
The price has been reduced. 2021/9/11 selling price 15,000 yen 92mm thick marble board. It weighs about 50 kg, and considerable vibration suppression can be expected. There is a feeling of use such as chipping and dirt (Takasaki Atsushi)
Accessories: none
Main specifications: W460 × H92 × D340mm about 50 kg
This stand is the perfect size for a bookshelf speaker. It has an excellent design and is compatible with a wide range of small speakers made in Japan and overseas. The appearance has a feeling of use such as dullness. (Morning Tomoho)
Accessories: none
Main specifications: W280 × H596 × D340mm 6kg/1 unit
The price has been reduced! 2021/12/23 Sales price 1,200 yen* Only one bottle is sold. Genuine stand for NS-10MM The height is also adjustable, so you can maximize the performance of the speaker. The state of the appearance has some feeling of use to some extent. (Yuki Yamato)
Accessories: none
Main specifications: W300 × H618 ~ 868 × D300mm Weight 2.1 kg
A stand for small speakers ideal for space-saving installations. How about applications such as tabletops and monitor speakers (Yoichi Murakoshi)
Accessories: none
Main specifications: Load capacity 5kg Top plate 195mm × 155mm Bottom plate 150mm × 120mm Height 245mm 2.1kg
Stand for high position small speakers The structure is made of a high-density compression board where the struts are clogged to the core, and the silhouette with both front sides rounded curves is also highly designed. The appearance has a feeling of use such as dullness. (Morning Tomoho)
Accessories: none
Main specifications: Height 500 mm Top plate W240 × D270 (W200 × D250) mm bottom plate W280 × D330 mm Weight 6.0 kg/book
Set of 4 Wood block insulator made by CORAL. Built with a sense of stability, it can be used with a wide range of speakers from medium to large. Scratches are scattered (Murakoshi Yoichi)
Accessories: none
Main specifications: W100 × H190 × D390mm 5.2kg/book
Speaker stand for medium-sized speakers It has an atmosphere with the dark wood color seen in domestic speakers from the 80s. There is a slight feeling of use such as threads and seal marks on the corners (Yoichi Murakoshi)
Accessories: none
Main specifications: Top plate size W323 × D282mm W363 × H352 × D350mm 7.3kg
A sturdy and stable speaker stand. The size is just right for medium-sized speakers such as the NS-1000M. By changing the direction of the inner plate, the width can be selected from 300 mm and 350 mm (Atsushi Takasaki)
Accessories: none
Main specifications: W350 × D300 × H247mm Approximately 6 kg/book
This is a buildable stand dedicated to MONITOR's dedicated stand. The stand, which combines a black-painted column with a curved loosely arced top and bottom plate, is made heavier than necessary, with an arcuate bottom plate that takes a step away from modern Italian design. Not enough strength has been secured. There are abrasions, small scratches (Oikawa Tetsuji)
Accessories: spike, spike base, fixing screw
Main specifications: Whole part W395 × H657 × D310mm top plate W150 × D150mm 6.6kg/book
The price has been reduced. 2021/11/21 Sales price 74,800 yen Speaker stand for B&W 805D series. Equipped with a spike insulator “T-PROP”. A completely new concept developed with the theme of eliminating the stress of the speaker as much as possible by absorbing and releasing it in a natural way without overloading the diamond formation structure. It is a speaker stand (Itsuro Mizushima)
Accessories: 4 fixing screws
Main specifications: Top plate B & W 805Diamond, D3 dedicated design bottom plate W280 × D360mm height 500mm about 15kg
The price has been reduced! 2021/11/19 selling price 15,000 yen speaker stand for DS-77, black type. It can be widely used for medium-sized speaker systems including the DS-77 series and DS-1000 series. Appearance has a lot of feeling of use such as horns, dents, rubbing etc. (Yuki Yamato)
Accessories: None
Main specifications: Top plate (actual measurement) size W316mmXD270mm Bottom plate (actual measurement) size W380mmX310mm Total height (measured) 304mm 10kg
Set of 4 It is a stand made of high carbon cast iron with excellent vibration handling capacity. Can be used for a wide range of speakers from large to medium-sized speakers. It reproduces sound images accurately and tightly. Appearance has a feeling of use such as scratches and dullness. (Asaine Chiho)
Accessories: None
Main specifications: W100 × H140 × D300mm high carbon cast iron weight 8kg/1
Unspecified ceiling hanging bracket Fits BOSE 101MM screw holes (operation and safety are not guaranteed). With angle adjustment function (Yoichi Murakoshi)
Accessories: None
Main specifications: 110 × 146 × 110mm
Popular high definition speaker selector. The structure of the company's unique commitment, such as internal wiring using discrete design 6N copper that switches for each ground circuit. Speaker terminals are also compatible with extra thick cables, bananas, and spade plug terminals. Feel safe when switching between heavy and heavy weights. The appearance is light dull. (Yoichi Murakoshi)
Maintenance information: 2021.11.20 continuity check
Accessories: original box, instruction manual
Main specifications: Input 1 system SP output 3 systems W370 × H71 × D164mm 3kg
Unused items! Table stands compatible with satellite speakers are in stock. You can hide the cable inside, and it is a model that you can use it cleanly as well. It is in good condition, there is a protective film left on the stand base part, and I think it is an unused item. (Hiroki Yamato)
Accessories: Original box instruction manual
Main specifications: Compatible models 3, 2, 1/FreeStyle Series, AM Series, Lifestyle Series, Lifestyle T20 system, Lifestyle V25 System, Lifestyle V35 system Φ152 × H178mm Weight 0.6 kg (1 bottle)
Wooden stand with JBL tweeter mountable If you were looking for it, please take this opportunity (Atsushi Takasaki)
Accessories: None
Main specifications: Hole diameter approx. 80 mm screw hole diagonal 110 mm approx. W120 × H 136 × 120 mm approx. 244 g/book
Stand for high position small speakers The structure is packed to the core using a high-density compression board, and the silhouette with a round curve on both sides of the front is also highly designed. There is a feeling of use (Atsushi Takasaki)
Accessories: manusal, top plate (small)
Main specifications: Height 500 mm Top plate W240 × D270 (W200 × D250) mm Bottom plate W 280 × D330 mm Weight 6.0 kg/book
The price has been reduced! 2021/10/31 Sales price 5,000 yen Unspecified speaker stand. Similar to Hamilex SB-946, but slightly different in size. The appearance has a feeling of use such as small scratches and dullness. * Since one screw does not come off, you cannot change the height and width of the middle plate. There is a slight wobble. (Morning Rice Tomoho)
Accessories: None
Main specifications: Size 300 × 260 × 240 mm Weight 3.7 kg