price cut! 2021/6/19 selling price 69,800 yen JBL2 inch Screwdriver Wooden Horn Originally designed for concert halls, it is a horn that spreads sound over a wide range without difficulty. Wood gives you a warm and soft tone that is different from metal. The appearance has a feeling of aging such as scratches, dullness, etc. (Asai no chi law)
Accessories: none
Main specifications: Directional 140 degree x 60 degree (horizontal x vertical) crossover frequency 800Hz W660 × H95 × D340mm Weight 4.4 Kg
Artec's 8 sectoral horn with Throat 30162. You can enjoy a sound that has a sense of spread and openness that you can't easily hear with other horns. It is a horn that gives a sound sound even at a small volume. Slightly rusty, there is a feeling of use. (Kondo Hirotsugu)
Accessories: stay
Main specifications: 8-sector crossover for 2" drivers 500 Hz W610 x H390 x D460mm approx. 7.6kg
price cut! 2021/6/19 Sale price 99,800 yen Please install a 2-inch driver such as a large professional radial horn 2440 and enjoy the loud sound. The powerful sound pressure feeling that goes straight out is a masterpiece. It is also recommended as an introductory machine for large horns. The appearance has a feeling of use over time such as scratches, paint peeling etc. (Asai no chi law)
Accessories: none
Main specifications: crossover frequency 500Hz horizontal 90 degrees vertical 40 degrees W800 × H615 × D215 mm 13.8 kg/book 11.3kg
price cut! 2021/6/21 selling price 42,800 yen This is an ALTEC classic 1-inch 4-sectoral horn. With your favorite 1-inch driver such as 802-8D, you can enjoy the horn sound unique to ALTEC with crisp. The appearance has a feeling of aging such as scratches, dullness, etc. (Asai no chi law)
Accessories: none
Main specifications: crossover 500Hz directional horizontal 90° x vertical 40° throat diameter 250mm
W600 × H270 × D475mm 5.8kg (measured)
The price was reduced. 2021/6/9 selling price 25,000 yen JBL2 inch driver vial radial horn Because there is no depth and the opening is large, it makes you hear a light and open sound. It is a horn that can be played pretty much because it is small and lightweight with a mild sound without a fox. (Mizushima Itsuro)
Accessories: none
Main Specifications: 400Hz Vial Radial Horn Cutoff for 2" Horizontal 60 Degree Vertical 40 Degree Throat Diameter 5cm Dimensions W445xH279XD236mm Weight 2.2kg (1 piece)
price cut! 2021/6/19 selling price 14,000 yen*It is cheap because of poor condition! JBL 2 inch to 1 inch conversion throat This is an essential item when installing a screwdriver with a throat diameter of 2.5 cm on a horn with a throat diameter of 5 cm. There is a feeling of use such as some paint peeling. (Asai no chi law)
Accessories: none
Main specifications: 2inch opening side 49mm/1 inch side 25mm W120 x H105mm approx. 0.5kg
price cut! 2021/6/19 selling price 25,000 yen JBL2 inch driver vial radial horn Because there is no depth and the opening is large, it makes you hear a light and open sound. It is a horn that can be played pretty much because it is small and lightweight with a mild sound without a fox. The appearance has a feeling of use such as small scratches, dullness, etc. (Asai no chi law)
Accessories: none
Main Specifications: 400Hz Vial Radial Horn Cutoff for 2" Horizontal 60 Degree Vertical 40 Degree Throat Diameter 5cm Dimensions W445xH279XD236mm Weight 2.2kg (1 piece)
Disposal price cut! (Members are not eligible for discount) 2018/9/21 selling price 150,000 yen Western 555 It is a pair of horns that can connect drivers etc. Appearance has scratches, dullness due to aging use. Shipping costs will be quoted separately. (FUKUZAWA Osamu)
Maintenance information: 2018.9.21 working confirmed
Accessories: none
Main specifications: crossover 400Hz W510 × H550 × D470mm 7.5Kg (1 bottle)
This is an unknown 1" horn. It is painted by the previous owner and it is beautiful. It is good if there is an additional wooden base for placing the tweeter or having rubber feet attached to the enclosure. Some feeling of use, paint peeling can be seen. (Yamato Yuki)
Accessories: none
Main specifications: Driver mounting part diameter 91 mm Throat inner diameter 25mm opening mounting hole diameter 7mm External dimensions D551 × H188 mm x D390 mm approx. 9.8 kg (all measurements)
Graceful audio 2" wood horn Originally JBL2450J was mounted. Details are unknown, but it is stubborn and has high design features such as steps. The appearance has scratches and dullness. (YONEJIMA Satoshi)
Accessories: none
Main specifications: W605 × H215 × D490mm (measured) weight 9.3kg
price cut! 2021/6/20 selling price 15,000 yen*1 only! HIFAIDO first stock! This conical horn uses high density wood compression material with uniform material and low dimensional change due to temperature and humidity, and has sufficient consideration for orientation characteristics and sound localization. Enjoy a mild sound quality that is natural and less colored in wood horn. Appearance has abrasions and stains (Asai Chiho)
Accessories: none
Main Specifications: Conical Horn High Density Wood Compression Wood Grain Transparent Finish Cutoff Frequency 330 Hz Throat Diameter 25.4 mm Compatible Driver FD101, D100A, etc. Dimensions W585×H89× 373mm weight 5kg/book
※It is cheap because it is in poor condition. CORAL 1 inch sectoral horn JBL1 inch driver mountable With the impression that it stretches straight, you can feel the momentum unique to the horn. Appearance is painted peeling etc. (Satoshi Yoneshima)
Accessories: no accessories
Main specifications: sectoral horn, flare cut 400Hz directivity/horizontal 90 degree, vertical 45 degree dimension W436 × H183 x D324mm Weight 5.5 kg/1
price cut! 2021/6/12 selling price 12,000 yen 1 inch driver straight short horn It has been adopted by various speakers and is a standard model that has long been used. The appearance has Slight Scratch. (YONEJIMA Satoshi)
Accessories: no accessories
Main specifications: Directional characteristics 90 (horizontal) /45 (vertical) throat diameter 2.5 cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
Acoustic lens installed on JBL monitor speakers such as 4343 series. By wearing it, it moderately diffuses and calms the sound of too strong horn. There is no velcro on one side The appearance has dirt and dullness as a whole. (Yoichi Murakoshi)
Accessories: none
Main specifications: Directional 80 degree x 45 degree (measuring 2307, 2311 horn mounted) W254 × H156 × D63mm 0.5kg
The sectoral horn that is used for the high range of FOSTEX speaker system GS3000. Comes with a 2" Throat HA51 for use with JBL or TAD drivers It is a horn that allows you to enjoy a straight and clear sound. There is dullness throughout and paint fall in some places (Yoichi Murakoshi)
Accessories: none
Main specifications: Aluminum alloy, cut-off 350Hz, W561×H200 × D425mm 7.6kg
Disposal price cut Member discount is not applicable. 2021/06/05 Selling price 240,000 yen 2505 with stand! 2 inch horn+lens with massive slant plate It is the size and presence as nicknamed “ghost horn”. The sound of an elliptical opening exponential horn produces a very unusually natural sound. There are scratches and paint peeling in some places (Yosuke Kojima)
Accessories: Stand (※ no set screw)
Main Specifications: Crossover Frequency 800Hz Throat Diameter 50mm W914 × H305 × D483mm Weight 10.5 kg/Book (not including stand)
Disposal price cut Member discount is not applicable. 2021.5.30 Selling price 450,000 yen with dedicated stand! “Beehive” type professional acoustic lens If you combine 375 and 2440, you can enjoy the extrusions that can only be enjoyed with this horn and a sense of energy that is bathed in the whole body. Corrosion of aluminum, there is a slight deviation in the mounting angle of the stand. Adjust the storage area with a felt etc. (Yoichi Murakoshi)
Accessories: Stand
Main Specifications: 2" Driver Horn Crossover Frequency 500Hz Throat Diameter 50mm W343 x H420 x D420mm 13.6kg
Straight Short Horn for 1" Driver It is a long-used standard model that is used in a variety of speakers. Painting is peeled off (Tetsuji Oikawa)
Accessories: None
Main specifications: Directional characteristics 90( horizontal) /45( vertical) throat diameter 2.5cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
Short type vial horn that is light and easy to use. With the goodness of light sound loss, you can enjoy the goodness of sound that you won't lose even if you match the larger system. (Itsuro Mizushima)
Accessories: None
Main Specifications: Vial Horn Cutoff 400Hz Horizontal 90 Degree Vertical 40 Degree Foam Resin W445 x H279 x D236mm Baffle Opening Dimensions W403 x H238mm (Front Mounting) Baffle plate W590 × H400mm 3.9 kg/unit
Short type vial horn that is light and easy to use. With the goodness of light sound loss, you can enjoy the goodness of sound that you won't lose even if you match the larger system. Manufacturer has a missing seal. (Itsuro Mizushima)
Accessories: None
Main Specifications: Vial Horn Cutoff 400Hz Horizontal 90 Degree Vertical 40 Degree Foam Resin W445 x H279 x D236mm Baffle Opening Dimensions W403 x H238mm (Front Mounting) Baffle plate W590 × H400mm 3.9 kg/unit
price cut. 2021/5/23 Selling price 19,800 yen It seems that the horn used in Hyuger's paragon MID. The condition is good without conspicuous damage etc. (Itsuro Mizushima)
Accessories: original box
Main Specifications: W145 x H70 × D128 mm Throat Joint Diameter 70mm Throat Diameter 25mm Screw Hole Diagonal 48mm
Disposition price cut (Member discount not applicable) 2021/5/21 Selling price 598,000 yen with double throat 30172. ALTEC multicellular horn designed for theater hall and outdoor loudspeaker etc. If you like it is a good look that you would like to watch forever. There is a feeling of use such as scratches and dirt. (Takasaki Takasaki)
Accessories: double throat 30172
Main Specifications: Directional/Horizontal 105°, Vertical 60° Cell Configuration 3×5 Crossover Frequency 500Hz Approx. W770 × H440 × D640mm Approx. 44kg/This
JBL 2" Horn It is made of solid heavy resin. The sound loss is very good and you can enjoy the sound that you won't lose even if you match the larger system. Appearance is dull, small scratches, writing etc. (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Vial Horn Recommended Crossover Frequency 500Hz Cutoff Frequency 400Hz Horizontal 90°, Vertical 40° Throat Diameter 5cm Screw Pitch (Left and Right) 122/178/122mm (Up and down) 129/129mm W445 × H279 × D236mm 5.0kg
With a dedicated stand! Popular commonly known as honeycomb horn. The gloss and energy feeling of the middle area when installed 375 is exceptional. Appearance is dull and some paint peeling (Sasaki Shota)
Main Specifications: Crossover 500Hz Throat Diameter 50mm Lens Diameter 343 mm Depth Dimension 400mm Approx. 15kg
Flat-front vial horn for small and lightweight type It helps to make horizontal characteristics constant and to correct driver characteristics. It is a horn that stretches well in the middle range, and it is difficult to get noisy feeling in the high range. It is suitable for a slightly smaller system.. There are light threads and small scratches on the back mounting part. There is no JBL seal (Sasaki Shota)
Accessories: None
Main Specifications: Throat Diameter 25mm Compatible Driver 2426H/J Use Minimum Frequency 500Hz Recommended Lowest Crossover Frequency 630Hz High Density Polyurethane W448 x H173 x D174mm 1.4kg
We cut the price (2019.11.24 selling price 59,800 yen) ※ 2328 It is inexpensive because there is no dedicated throat. It is in stock of JBL large radial horn. You can experience dynamic sound full of penetrating power unique to a 2-inch driver. Serial 19521/32860 (Tadashi Watanabe)
Accessories: None
Main Specifications: Recommended Crossover 500Hz Size W810 x H210 x D510mm Weight 11.6kg
Short type vial horn that is light and easy to use. With the goodness of light sound loss, you can enjoy the goodness of sound that you won't lose even if you match the larger system. There are light threads, small scratches on the back mounting part, but there are no conspicuous scratches etc. It is generally good condition (Yoichi Murakoshi)
Accessories: None
Main Specifications: Vial Horn Cutoff 400Hz Horizontal 90 Degree Vertical 40 Degree Foam Resin W445 x H279 x D236mm Baffle Opening Dimensions W403 x H238mm (Front Mounting) Baffle plate W590 × H400mm 3.9 kg/unit
Straight Short Horn for 1" Driver It is a long-used standard model that is used in a variety of speakers. Appearance has scratches, dullness. Serial 13363/17760 (Kimiya Miura)
Accessories: No accessories
Main specifications: Directional characteristics 90( horizontal) /45( vertical) throat diameter 2.5cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
With pedestal! A7 is the familiar ALTEC classic 1 inch 4 sectoral horn. With your favorite 1-inch driver such as 802-8D, you can enjoy the horn sound unique to ALTEC with good crisp. Cut out the nameplate on one side and dirt on the other side (Yoichi Murakoshi)
Accessories: None
Main Specifications: Crossover 500Hz Directional Horizontal 90° x Vertical 40° Throat Diameter 250mm W600 × H284 × D570mm 6.6 kg (Measured, Pedestal Included)
I cut the price! 2021/3/10 Selling price 15,000 yen ※ It is inexpensive because of poor condition. BL exponential horn. The long horn allows for use at low crossover frequencies. It is possible to create highly directional monitor sound in conjunction with acoustic lenses. Appearance has a noticeable rubber-based dump material mark. Serial 11206/11239 (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Crossover Frequency 800Hz Sound Pressure Level 108 dB (2308 Lens Use) Throat Diameter 2.5cm Diameter 156 × D293mm Weight 1kg/This
Under Disposition Price (Member Discount Not Applicable) (Sales Price 150,000 yen for 12/2 2019) Multi-cellar Horn designed for Altec theaters, halls, outdoor loudspeakers, etc. It has a 1×2 cell configuration. Feeling of use, age dullness, scratches are scattered. (Tadashi Watanabe)
Accessories: None
Main Specifications: Multi-Seller Horn Oriented Characteristics/Horizontal 40 Degrees, Vertical 0 Degree Crossover Frequency 300Hz 813×432×787mm
Disposal price drop (not applicable for membership discount) (2021.4.7 selling price 248,000 yen) with throat 8 Sectoral Horn for 2" Driver The model that should be installed in the A5 gives you a vast sense of scale. The appearance has scratches. * Dump agent is applied to each connection of the opening. (Takasaki Takasaki)
Accessories: None
Main specifications: W598 × H420 × D630mm, horn body W598 × H370 × D550mm 20kg
I cut the price! 2021/3/10 Selling price 19,800 yen ※ It is cheap because of poor condition. Flat-front vial horn for small and lightweight type It helps to make horizontal characteristics constant and to correct driver characteristics. It is a horn that stretches well in the middle range, and it is difficult to get noisy feeling in the high range. It is suitable for a slightly smaller system. (Kimiya Miura)
Accessories: No accessories
Main Specifications: Throat Diameter 25mm Compatible Driver 2426H/J Use Minimum Frequency 500Hz Recommended Lowest Crossover Frequency 630Hz High Density Polyurethane W448 x H173 x D174mm 1.4kg
Disposal Markdown. Member discount is not applicable. 2021.4.12 Selling price 128,000 yen ALTEC 311-90 horn opening 60 degree version Foundry Sectoral Horn used in the famous ALTEC A5 system. It is characterized by a firm, thick sound with little squeak. Small scratches, paint peeled off (Kazunari Sueyoshi)
Accessories: None
Main Specifications: Sectoral Horn Orientation Characteristics: Horizontal 60 degrees, Vertical 40 degrees Crossover Frequency 300Hz or more Compatible Driver Unit: 288C, 288D, 290E, 291-16A W510× H267 x D535mm Weight 8.9 kg
Home-made JBL1 inch wood horn with 120 degree opening angle It is elaborately made, it is a short horn but the sound seems to be good. (Takasaki Ryo)
Main specifications: Throat caliber 25mm W385 × H48 (Throat 102) × D268mm 1.1 kg
Disposal price drop (not applicable for membership discount) (2021.4.7 selling price 148,000 yen) A combination of gold wing H89+L89. Horn lens consists of an acoustic lens with a square exponential horn and a hyperbolic plate. This is the model used for the name speaker D30085 Hearts field. Unique sounding from the multi-wing structure of the metal is blown up in. (Takasaki Takasaki)
Accessories: None
Main specifications: H89+L89 Directional characteristics 100 degrees (horizontal) /45 degrees (vertical) Throat diameter 5cm Crossover Frequency 500Hz or higher Lens Type Serpentine Lens Dimensions W505× H178 x D118mm Compatible Model 375 Horn Total Length 305mm (Horn Depth Only) Acrylic Sheet W580 x H210mm 5.6 kg
The horn unit of VITAVOX under disposal price (excluding member discount) (2021.1.13 selling price 150,000 yen). Perhaps it is the same specification as the CN-481 adopted in the late CN191. Dull and dirt remain inside the horn (Itsuro Mizushima)
Accessories: None
Main Specifications: W585×H235 × D435mm 5.8kg [CN-481] Cutoff Frequency 330Hz Diffusion Characteristics 90°x20°
Disposal price reduction other member discount not applicable (2021.3.27 selling price 198,000 yen) Dedicated horn for the company's driver 594. It is also installed in the Grand Canyon of Eltas, and it is a horn that directs the spread of sound to enough. ※ JBL 2 inch can not be mounted. There is a feeling of use such as color peeling in some places. (Takasaki Takasaki)
Main Specifications: Throat Diameter 49mm Screw Pitch 86 mm W800 × H300 × D450mm 11kg
I cut the price! 2021/3/31 Selling price 10,000 yen ※ Plate shortage · It is inexpensive because the texture is different on the left and right. It can also be built into an enclosure, but it also makes a good sound even if you attach a screwdriver and put it on top of the enclosure. Appearance, there are stains and dullness. (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Directional Horizontal 80 Degrees Horizontal for 1" Driver, Recommended Crossover 1.2kHz Vertical 45 Degrees Baffle Opening Diameter 108mm Depth 216mm
Low price (2019/7/14 selling price 59,800 yen) Compact radial horn. JBL compression screwdriver with throat diameter 2.5 cm can be installed. Made of die-cast aluminum and coated with a special dump agent LansaPlus on the outside to prevent resonance. Appearance is Kusumi, paint peeling, small scratches, etc. (king exhibition)
Accessories: None
Main Specifications: Directional (Horizontal x Vertical) 90×40 Crossover Frequency 800Hz W584 × H140 × D394mm Weight 9.1kg
※ Because it is faded on one side, it is inexpensive. Altec's representative sectoral horn made of aluminum die-cast. The wide diffusion characteristic is attractive, it is a horn that has a core and easy to listen to. There are small scratches, paint peeling etc. (Tetsuji Oikawa)
Accessories: None
Straight Short Horn for 1" Driver It is a long-used standard model that is used in a variety of speakers. (Itsuro Mizushima)
Accessories: None
Main specifications: Directional characteristics 90( horizontal) /45( vertical) throat diameter 2.5cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
We cut the price (2021.2.9 selling price 25,000 yen) The vial horn for JBL2 inch drivers. With no depth and large aperture, you can listen to light and open sounds. It is a horn that you can play pretty much because it is small and lightweight with a mild sound that is not too strong. Feeling of use, there is dullness. Serial 43696, 43893
Accessories: None
Main Specifications: 2 inch Vial Horn Cutoff 400Hz Horizontal 60 Degree Vertical 40 Degree Throat Diameter 5cm Dimensions W445xH279xD236mm Weight 2.2 kg (1 pcs)
I cut the price! 2019/12/28 Selling price 50,000 yen ALTEC classic horn, 511B! This is a 4 sectoral horn for 1 inch With your favorite 1-inch driver such as 802-8D, you can enjoy the horn sound unique to ALTEC with good crisp. The appearance has aging feeling of use, small scratches, paint peeling. Cereal 14921/16690 (Makoto Kono)
Accessories: None
Main Specifications: Crossover 500Hz Directional Horizontal 90° x Vertical 40° Throat Diameter 250mm W600 × H270 × D486mm 6.7kg
JBL1 inch throat “beehive” horn When docked with JBL LE175 it becomes 175DLH familiar with Lancer 101 etc. This is the classic horn of the old JBL. There are some painted bald, but I think it is a very beautiful person for the year (Yasuto Koshihama)
Accessories: None
Main Specifications: Crossover frequency for 1 inch more than 1,200Hz Directional 60° (conical) beehive W145 × H145 × D173mm 2kg/book
Sectoral horn used in A5 significantly below price (2021.2.14 selling price 180,000 yen). It features 90 degrees of horizontal diffusion and a wide sound. Yet the texture of the middle and high range is not thin, making you feel a solid build. There is a feeling of use. Serial 010518/009818 (Takasaki Takasaki)
Accessories: None
Main specifications: Horizontal orientation characteristics 90 degrees vertical orientation characteristics 40 degrees crossover frequency 300Hz or higher compatible driver 288C/288D/290E/291-16A 15.8kg/book