The price has been reduced. 2021/12/16 selling price 25,000 yen. A self-made 1" wood horn with an opening angle of 120 degrees that looks like a smaller JBL 2397. It is elaborately made, and although it is a short horn, it seems that the sound skipping is good. (MURAKOSHI Yoichi)
Accessories: None
Main specifications: Throat part caliber 25 mm W385 × H48 (throat 102) × D268mm 1.1 kg
The price has been reduced. 2021/7/24 Selling price 59,800 yen ※ Because sand beige is painted, it is inexpensive. Wooden Horn for JBL 2" Driver Originally designed for concert halls, it is a horn that spreads sound over a wide range without difficulty. Because it is made of wood, it gives a warm and soft tone that is different from metal. (KONDO Hirotsugu)
Accessories: None
Main specifications: Directional 140 degrees × 60 degrees (horizontal × vertical) Crossover frequency 800Hz W660×H95×D340mm Weight 4.4Kg
The price has been reduced. 2021/10/17 selling price 69,800 yen JBL 2 inch screwdriver wooden horn Originally designed for concert halls, it is a horn that spreads sound over a wide range without difficulty. Because it is made of wood, it gives a warm and soft tone that is different from metal. The appearance has a feeling of use such as dullness (Kondo Hirotsugu)
Accessories: None
Main specifications: Directional 140 degrees × 60 degrees (horizontal × vertical) Crossover frequency 800Hz W660×H95×D340mm Weight 4.4Kg
The disposal price has been reduced! (Member discounts are not applicable) 2021/8/12 selling price 19,800 yen JBL's exponential horn. The long horn allows it to be used at low crossover frequencies. It is possible to create a monitor sound with high directivity in combination with an acoustic lens. The appearance is dull, and small scratches are scattered in some places. 1 serial 9426/19434 (Satoshi Yonejima)
Accessories: screws
Main specifications: Crossover frequency 800Hz Sound pressure level 108dB (using 2308 lenses) Throat diameter 2.5cm Diameter 156 × D293mm Weight 1kg/book
※ Because the texture is different on the left and right, it is inexpensive. A short horn used in 4343 and 4344. It can also be integrated into the enclosure, but you can also hear good sound by attaching a screwdriver and placing it on top of the enclosure. The appearance has a feeling of use such as dullness and scratches. (Morning Tomoho)
Accessories: None
Key Specifications: For 1" Drivers Directional Horizontal 80 Degrees, Vertical 45 Degrees Recommended Crossover 1.2kHz Baffle Opening Diameter 108mm Diameter Depth 216mm
JBL Professional Large Radial Horn with Throat Adapter 2328 A radial horn with a straight sound and a moderately wide sound. Please try the sound with good sound skipping, which is also used for large output outdoor use. The appearance has scratches and paint peeling in some places on the body. Serial 13496/33701 13191/33714 (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Radial Horn Crossover 500Hz for 2" Directivity: Horizontal 60° x Vertical 40° W613×H203×D508mm 9.5kg/1pcs
It is inexpensive because the condition is not good, such as the one-sided lens is deformed. Combination of 2 inch driver horn+acoustic lens for near range PA and monitor. It makes 2441, 2440, etc. sound well. It is recommended for those who hear too much noise with radial horns. The horn has been deadened. There is a slightly longer screw that stops the horn and acoustic lens, and there is a mark that the screw came into contact with the part that penetrated the diffuser. There are small scratches, dullness, paint peeling stains in other places (Shota Sasaki)
Accessories: None
Main specifications: Directional horizontal 100 degrees x vertical 45 degrees for 2 inches Throat diameter 51mm Crossover frequency 800Hz W508 × H156 × D407mm 5.0kg
The price has been reduced. 2018/3/5 Sales price 50,000 yen An aluminum die-cast sectoral horn representing Altec. It is painted green in the H811 style. The wide diffusion characteristics are attractive, and the horn has a core and is easy to listen to. The appearance is scratches. (Naotaka Ioyuki)
Accessories: None
Main specifications: Crossover frequency 800Hz compatible driver 802-8D, 806-8A, 807-8A Dimensions W470 × H220 × D340mm Weight 4.1kg
Combination of 2 inch driver horn+acoustic lens for near range PA and monitor. It makes 2441, 2440, etc. sound well. It is recommended for those who hear too much noise with radial horns. There is a slightly longer screw that stops the acoustic lens. There are small scratches, dullness, paint peeling stains in some places (Yoichi Murakoshi)
Accessories: None
Main specifications: Directional horizontal 100 degrees x vertical 45 degrees for 2 inches Throat diameter 51mm Crossover frequency 800Hz W508 × H156 × D407mm 5.0kg
The price has been reduced. 2021/10/20 selling price 45,000 yen Only one bottle. Exponential horn with oval opening. Aluminum die-cast horn with an emphasis on horizontal directivity. The recommended crossover frequency is 800 Hz. There are scratches on the whole, paint peeling, etc. Serial 10005 (Hirotsugu Kondo)
Accessories: None
Main specifications: Directivity 60° × 30° Crossover frequency 800 Hz Throat diameter 5cm W346 × H162 × D305mm 3.2kg
The price has been reduced. 2021/11/14 selling price 39,800 yen Wooden morning glory horn designed and made with hyperbolic curves. It reproduces the soft singing voice that cannot be obtained with metal horns, and the plump sound of the torso of a stringed instrument. Compared to conventional aluminum horns coated with asphalt, the weight is 1/5 lighter. Originally, the MAXONIC D511A was mounted. Appearance is dull due to aging. (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Applicable screwdriver Goto unit SG-370/SG-3880 series (Goto unit requires screw coupler sold separately) Altec 1 inch type cut-off 550Hz recommended low range Crossover with 1kHz to 2kHz Diameter 200mm Length 230mm Weight 500g
This Yonematsu Woodhorn has an attractive sound. In combination with a 1-inch driver such as JBL, you can enjoy powerful and crisp sound. The appearance is overall kusumi, small scratches, there is a feeling of use (Yoichi Murakoshi)
Main specifications: Yonematsu plywood Throat diameter 25mm Throat outer diameter 90mm W600 × H120 × D378mm 5.6kg
It is inexpensive because it is in poor condition. CORAL Professional Series Straight Horn Can be combined with acoustic lens AL-603. There is damage such as deadning marks and paint peeling (Itsuro Mizushima)
Accessories: None
Main specifications: Crossover frequency 800Hz diameter 158 × depth 220mm 1kg
A wooden morning glory horn designed and made with hyperbolic curves. It reproduces the soft singing voice that cannot be obtained with metal horns, and the plump sound of the torso of a stringed instrument. Compared to conventional aluminum horns coated with asphalt, the weight is 1/5 lighter. Appearance has small scratches and dullness (Satoshi Yoneshima)
Accessories: No accessories
Main Specifications: Cut-off Frequency 200Hz Compatible Driver JBL2 Inch, ALTEC 1.4 Inch, Goto Unit SG-505, SG-555, SG-5880 Series Diameter 560mm Length H760mm (including throat part) Throat diameter 30mm 2.48kg (actual measurement)
CORAL acoustic lens AL-601 is in stock. It is compatible with tweeters with horn opening diameters up to 60mm, such as H-60. Since the frequency of the sound becomes narrower as it gets higher, it is used to diffuse the sound and compensate for the lack of radiation angle in the treble. Overall there is Kusumi ※ The block behind is not included (Shota Sasaki)
Accessories: Mounting bracket
Main specifications: Diffusion angle/horizontal 80 degrees Vertical 45 degrees Effective frequency 3 KHz or more compatible Horn caliber 60 Φmm or less width 130 × height 92 × depth 35 mm Weight 130 g
CORAL acoustic lens AL-601 is in stock. It is compatible with tweeters with horn opening diameters up to 60mm, such as H-60. Since the frequency of the sound becomes narrower as it gets higher, it is used to diffuse the sound and compensate for the lack of radiation angle in the treble. Overall there is Kusumi ※ The block behind is not included (Shota Sasaki)
Accessories: Nothing
Main specifications: Diffusion angle/horizontal 80 degrees Vertical 45 degrees Effective frequency 3 KHz or more compatible Horn caliber 60 Φmm or less width 130 × height 92 × depth 35 mm Weight 130 g
※ It is inexpensive because the paint peeling is noticeable on the whole. Straight short horn for 1" driver It has been adopted in various speakers and is a standard model that has been used for a long time (Shota Sasaki)
Accessories: Nothing
Main specifications: Directivity characteristic 90° (horizontal) /45° (vertical) throat diameter 2.5 cm Crossover frequency 500 Hz or more Horn total length 216 mm 1.1 kg/1
It is inexpensive because the manufacturer label on one side is missing. The short horn used on 4343, 4344 It can be built into the enclosure, but it can also be used with a screwdriver and placed on top of the enclosure to make it sound good (Shota Sasaki)
Accessories: Nothing
Main specifications: 1 inch driver directional horizontal 80 degrees, vertical 45 degrees Recommended crossover 1.2 kHz Baffle opening diameter 108mm Depth 216mm
Straight short horn for 1" driver It has been adopted in various speakers and is a standard model that has been used for a long time. Paint peels off and there is dirt (Shota Sasaki)
Accessories: Nothing
Main specifications: Directivity characteristic 90° (horizontal) /45° (vertical) throat diameter 2.5 cm Crossover frequency 500 Hz or more Horn total length 216 mm 1.1 kg/1
The short horn used on 4343, 4344 It can be built into the enclosure, but it can also be used with a screwdriver and placed on top of the enclosure to make it sound good (Shota Sasaki)
Accessories: None
Main specifications: 1 inch driver directional horizontal 80 degrees, vertical 45 degrees Recommended crossover 1.2 kHz Baffle opening diameter 108mm Depth 216mm
Artec's representative aluminum die-cast sectoral horn. The wide diffusion characteristics are attractive, and the horn has a core and is easy to listen to. Feeling of use, there is dullness (Shota Sasaki)
Accessories: Nothing
Main specifications: Crossover frequency 800Hz compatible driver 802-8D, 806-8A, 807-8A Dimensions W470 × H220 × D340mm Weight 4.1kg
There is no problem with the operation, but it is a currently sold product because it is inexpensive. It is probably made by YL acoustics, but it is a horn tweeter whose model number is unknown. The appearance has a feeling of aging such as painted bald. (Morning Rice Tomoho)
Maintenance information: 2021.11.1 band check OK (0.7kHz ~)
Accessories: None
Main specifications: Size W280 × H114 × D350 mm Caliber W240 × H80 m Weight 2.6 kg (actual measurement)
JBL's 2 inch to 1 inch conversion throat. It is an indispensable item when attaching a 2.5 cm throat diameter screwdriver to a horn with a throat diameter of 5 cm. There is a feeling of use such as dullness and dirt as a whole. Serial 17391 17981 (Itsuro Mizushima)
Accessories: none
Main specifications: Opening 2 inch side 49mm/1 inch side 25mm W120 x H105mm Approx. 0.5 kg
We have reduced the disposal price! (It is not eligible for member discounts) 2021/6/19 selling price 59,800 yen Compact radial horn. A JBL compression driver with a throat diameter of 2.5 cm can be installed. It is made of die-cast aluminum and coated with a special damping agent LANSUPLLAS on the outside to prevent resonance. The appearance has a feeling of use such as paint peeling. (Asaine Tomoho)
Accessories: None
Main specifications: Directional (horizontal × vertical) 90 × 40 crossover frequency 800 Hz W584 × H140 × D394mm 9.1kg
I cut the price. 2021/8/28 selling price 20,000 yen* Green painting. ONLY ONE ALTEC's classic 4 sectoral horn for 1 inch. You can enjoy the horn sound unique to ALTEC with your favorite 1-inch driver such as 802-8D. (Hirotsugu Kondo)
Accessories: None
Main specifications: crossover 500Hz directional horizontal 90° x vertical 40° throat diameter 250mm
W600 × H270 × D475mm 5.8kg
I cut the price. 2021/9/1 Selling price 15,000 yen Straight short horn for 1 inch screwdriver. It is a standard model that has been used in various speakers and has been used for a long time. Serial 51691 51660 (Atsushi Takasaki)
Accessories: none
Main specifications: Directional characteristics 90° (horizontal) /45° (vertical) Throat diameter 2.5cm Crossover frequency 500Hz or more Horn total length 216mm 1.1 kg/1
We have reduced the disposal price! (Member discounts are not applicable) 2021/7/13 Sale price 30,000 yen* 1 bottle only. The exponential horn was adopted by the company's representative speaker system “Paragon”. Focus on directivity horizontally. It boasts excellent sound pressure levels while being small. The appearance is scratches on the whole, paint peeling scattered, and the plate is out of stock (Satoshi Yoneshima)
Accessories: No accessories
Main specifications: Throat diameter 50 mm, screw hole approx. 7 mm, screw hole diagonal about 102 mm, external dimensions W346 × H162 × D305mm Weight approx. 3.2 kg/book
We have reduced the disposal price! (not eligible for member discounts) 2021/6/19 selling price 128,000 yen This is a 60-degree opening version of the ALTEC 311-90 horn. The cast sectoral horn used for the famous ALTEC A5 system. It features a solid, thick sound with little squeal. There are small scratches, paint peeling. (Asaine Tomoho)
Accessories: none
Main Specifications: Sectoral Horn Directional Characteristics: Horizontal 60 Degree, Vertical 40 Degree Crossover Frequency 300Hz or more Compatible Driver Unit: 288C, 288D, 290E, 291-16A W510× H267×D535mm Weight 8.9 kg
Short horn used in 4343, 4344. It can be built into an enclosure, but it also sounds good in the style of attaching a driver and placing it on top of the enclosure. The appearance may be dull and some paint peeling. Serial 15638/15694 (Satoshi Yonejima)
Accessories: Mounting screws
Main specifications: Directional horizontal 80 degrees, vertical 45 degrees recommended crossover for 1 inch drivers 1.2kHz baffle opening diameter 108mm depth 216mm
Combination of 2" driver horn+acoustic lens for close range PA and monitor. It makes 2441 and 2440 sound well. It is recommended for those who have too much sound flying with a radial horn. The appearance is overall small scratches, dullness, dirt, etc. (Tetsuji Oikawa)
Accessories: none
Main specifications: Directional horizontal 100 degrees x vertical 45 degrees throat diameter 51mm for 2 inches Crossover frequency 800Hz W508 × H156 × D407mm 5.0 kg
Fostex 1 inch driver radial horn Comes with a throat It can also be used for ALTEC and JBL drivers. The appearance is Kusumi, there are small scratches (Yukishi Fujisawa)
Accessories: none
Main specifications: Material/Aluminum alloy Cutoff/350Hz Horizontal radiation angle/90° W560×H200×D460mm Approx. 6.8kg
The price was reduced. 2021/8/28 selling price 42,800 yen*Green paint. This is an ALTEC classic 1-inch 4-sectoral horn. With your favorite 1-inch driver such as 802-8D, you can enjoy the horn sound unique to ALTEC with crisp. (Kondo Hirotsugu)
Accessories: none
Main specifications: crossover 500Hz directional horizontal 90° x vertical 40° throat diameter 250mm
W600 × H270 x D475mm 5.8kg
FOSTEX COMPACT WOOD HORN A shavings from a dense laminate of natural italia maple. Horizontal radiation angle 110 degree cutoff 600Hz It is small but has a polite finish without cutting. (Fujisawa Yukishi)
Accessories: Instruction manual, original box
Main Specifications: Radial Horn Compatible Unit FD101/FD100/D100A Size W250 × H100 × D211mm Weight 1.9 kg (1 piece)
Disposal price cut! (Exclusively eligible for member discounts) 2021/8/24 sales price 148,000 yen Luminous JBL popular vintage horn “Gold Wing” in stock. It is possible to install a 2inch screwdriver such as 375. The goodness of the missing and spread of the thick middle range will be outstanding. It is good to make it if a pedestal for placing a tweeter is installed on a wooden plate made by the former owner, or a rubber foot is attached to the place of installation with the enclosure. The state of appearance has some small scratches and dullness, but there are no noticeable scratches. Serial (2309) 1626 6668 (L5090) 12131 12138 (Yamato Yuki)
Accessories: none
Main specifications: Throat diameter 5.1cm crossover frequency 800 Hz Size W508 × H156 × D407 mm Weight 7.9kg (measured)
Electro voyce 2" horn Made of resin and not as hard as metal, you can hear sound with a good three-dimensional feeling. It is a convenient specification to mount a JBL 2-inch driver (Itsuro Mizushima)
Accessories: none
Main specifications: 2" horn driver directivity/horizontal 90° (500 to 20kHz) vertical 40° (1200Hz to 20kHz) Mounting diameter: 128mm (measured) Throat diameter: 50mm (measured) screw Pitch (diagonal) 102mm (actual measurement) W534 × H333 × D278mm (actual measurement) 3.0kg (measured)
JBL2 inch Screwdriver Wooden Horn Originally designed for concert halls, it is a horn that spreads sound over a wide range without difficulty. Wood gives you a warm and soft tone that is different from metal. The appearance has a feeling of use such as dullness. Serial (2397) 14590 14733 (2328) 40091 39668 (Asai Tomoho)
Accessories: none
Main specifications: Directional 140 degree x 60 degree (horizontal x vertical) crossover frequency 800Hz W660 × H95 × D340mm Weight 4.4 Kg
price cut! 2021/7/2 selling price 50,000 yen gold wing is a familiar JBL 2 inch horn. It rarely comes out alone, so if you were looking for it, come on this occasion. There is some feeling of use such as paint bald, but the condition is generally good without noticeable damage. Serial 75183/75128 (Takahashi Nobuyuki)
Accessories: none
Main specifications: W268 × H192 × D305mm (measured) 2.8 kg (measured)
Disposal price cut! (Member discounts are not applicable) 2021/8/11 sales price 240,000 yen stand 2505 included! 2" horn+lens with huge slant plate It is the size and presence as nicknamed “Ghost Horn”. The elliptical aperture of the exponential horn produces a very non-habit and natural sound. The appearance includes paint peeling and tape marks. Serial 11811/11190 (Miura Kimiya)
Accessories: Stand (2505)
Main specifications: crossover frequency 800Hz throat diameter 50mm W914 × H305 × D483mm weight 10.5kg/book (not included stand)
price cut! 2021/8/13 selling price 250,000 yen 2 inch horn+lens with huge slant plate. It is the size and presence of the nickname of “Ghost Horn”. The elliptical aperture of the exponential horn produces a very non-habit and natural sound. ※It is painted in black with gloss. The appearance is scratched and painted peeling. Serial 1468/1469 (YONEJIMA Satoshi)
Accessories: horn stand (2505)
Main specifications: 2" crossover 800Hz W914 x H381 x D476mm 11.6kg/book
The sectoral horn adopted in the model3401 speaker system. You can enjoy a rich sound and spreading tone made of aluminum and birch plywood. There are scratches and threads in appearance. Serial AF0049/A10090 (Miura Kimiya)
Accessories: no accessories
Main Specifications: Reciprocating Flare Horn Cutoff Frequency 350Hz Recommended Crossover Frequency 900Hz or higher Throat Opening Hole Diameter Φ25.4 mm Baffle Opening Size W184 × H102mm W220 × H120 × D220.2mm 1.68kg
This is a single throat adapter for JBL's rare 2" drivers. If you have 2397 or 2350, please take this opportunity. There is Kusumi in appearance. 4 serial 1569/41539 (YONEJIMA Satoshi)
Main specifications: horn for JBL2350/235/2397 W128 × H122 × D100mm 1.1 kg/book
Disposal price cut! (Member discounts are not applicable) 2021/7/31 selling price 200,000 yen WE22 style wooden curl horn. Throat is for WE555. The wood texture gives you a feeling of warmth. The look is also full of presence. Recommended for those who start western and field drivers from now on. There are no noticeable scratches, but some paint is dripping. (Yamato Yuki)
Accessories: none
Main specifications: Outside diameter W717 × H710 × D1010mm opening W700 × H800mm 11Kg (1) Driver mounting part diameter 35mm (all measured)
1" driver beehive horn Recommended for those using JBL LE175 and LE85. Dullness and peeling. Serial 7153 7362 (Yasuhito KOSHIHAMA)
Accessories: none
Main specifications: Crossover frequency 1200 Hz recommended directional 60 degrees (conical) horn total length 171mm Compatible unit LE175 LE85
Straight short horn for 1" driver Adopted by various speakers, it is a standard model that has been used for a long time (Shota Sasaki)
Accessories: none
Main specifications: Directional characteristics 90 (horizontal) /45 (vertical) throat diameter 2.5 cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
Self-made wood horn with 1" throat Drivers such as JBL, ALTEC and TAD are available. Unknown details. There is a sunburn on the top plate, there are small scratches and cosmetic plate peeling overall (Oikawa Tetsuji)
Accessories: none
Main specifications: W695×H126 × D504mm 11.5kg (measured)
The price was reduced. 2021/7/24 selling price 49,800 yen ※ Throat attachment point, inner demon is missing 2 places, so it is inexpensive. SANO AUDIO horn SN500. Comes with a throat It is a wood horn for multi-enthusiasts to incorporate in a calm blows with wide diffusion characteristics. Appearance scuffs are noticeable. (Kondo Hirotsugu)
Accessories: Throat
Main specifications: Horizontal oriented 120 degree throat diameter 5cm Thread pitch diagonal 10cm W805 × H120 × D410mm D480mm (including throats)
The price was reduced. 2021/7/25 selling price 39,800 yen Altec 1 inch mantalay horn Since the range is wide, the 2Way with the woofer goes well. Appearance is a good pair without major damage. (Kondo Hirotsugu)
Accessories: none
Main specifications: 500Hz to 15000Hz frequency band recommended crossover 500Hz horizontal 90° vertical 40° compatible unit 288 290 299 dimensions W580 × H325× D320mm weight 3.6kg
JBL EXPONENSIAL HORN Because it is a long horn, it can be used at low crossover frequencies. It can be combined with acoustic lenses to create highly directional monitor sound. Overall dullness, small scratches are seen in some places (Yoichi Murakoshi)
Accessories: none
Main specifications: Crossover frequency 800Hz sound pressure level 108 dB (2308 lens used) Throat diameter 2.5 cm Diameter 156 × D293mm Weight 1 kg/bottle