*Ordering Saran Net is in progress. A woofer unit equipped with an SMC magnetic circuit that achieves significant reduction in distortion by adopting SMC material (soft magnetic compound) for the pole piece part of the magnetic circuit is mounted. You can enjoy the small yet highly textured sound of Dali. There are dull stains on the exterior and edge cone paper, and a feeling of use such as dullness and small scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: ※Saran net is being ordered
Main specifications: 4Ω 87dB4 59Hz to 27kHz W195xH351xD297mm 7.8 kg
Maintained by the manufacturer. The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There are abrasions on the exterior and volume, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (1 PSW rework, 12V relay, function SW replacement. (Amplifier board inspection, solder correction, operation confirmation test)
Accessories: instruction manual, power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible W434 x H180 x D478 mm 22 kg
Maintained! 15th anniversary model of the 607 series. MOS-FET is used for the power stage, adding a sense of transparency to its characteristic heat, and is compatible with various music genres. It has a configuration that exceeds its class, such as balanced input support, and it is a powerful machine that is still popular today. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 maintenance completed (tone and other switches dismantled and polished, coated with grease (loudness, muting, processor, subsonic, input selector, power amplifier direct, source direct switch), output relay replacement, protector part capacitor replacement, solder repair, internal inspection and cleaning, bottom repair, operation confirmation)
Accessories: power cable, copy of manual
Main specifications: 45W+45W (8Ω) PHONO (MM/MC) W460 × H159 × D446mm 18.8 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
A power supply with approximately 2.5 times the capacity of the power supply built into the GT player. In addition to improving rotation stability, the phono motor's bidirectional servos are used as electronic brakes, and heavyweight turntables stop quickly. There are dents on the exterior, dents on the top plate, rust on the output terminals, dullness throughout, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: Applicable models GT-2000/L/X W135 x H93 x D365 mm, weight 5 kg
*Currently sold. A small Yamaha speaker with a piano finish. Rich bass reproduction is achieved by deepening the depth while being small. Deep low frequencies are added to the sharp, stretchy mid-high range unique to Yamaha, so you can enjoy sound that's more than the price. There are scuffs and dents on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: saran net
Main specifications: output sound pressure level 85dB impedance 6Ω allowable input 40W playback frequency band 55Hz to 80kHz W154 x H274 x D287 mm weight 3.9 kg
Audio-Technica universal tone arm for broadcast stations. The lead wire inside the arm uses silver wire with a Teflon coating. This is such a masterpiece arm that was later reprinted for a limited time. The exterior is slightly dull, but it is good for the model year (Murakoshi Yoichi)
Maintenance information: 2024.5.13 operation confirmed 2024.2.27 operation confirmed, IFC weight thread replacement
Accessories: copy of instruction manual, connection cord, armrest, hex wrench
Main specifications: static balance type, execution length 257 mm, compatible cartridge, 13.5 to 33 g (including shell), needle pressure range 0 to 3 g
S terminal cable 2.0m model number unknown, S terminal cable from Audio-Technica's FINE GOLD series. Uses OFC line. There are many dull stains on plugs and shields (Murakoshi Yoichi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
I checked Blu-ray, DVD, and CD playback with a simple check. Since it is cheap, it will be sold as is. A high-end Blu-ray disc player from 2008. Equipped with a high image quality circuit CREAS with 14 bit processing. You can enjoy SONY-like sound quality that is clear and has good cuts (Murakoshi Yoichi)
Maintenance information: 2024.5.10 simple sound output, video output confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: compatible media · BD/DVD-R/-RW/+RW/+R card slot no LAN terminal · no DV terminal · D terminal x 1 · optical D audio x 1 · HDMI terminal x 1, no 3D video compatible W430 x H125 x D365 mm 10 kg
HDMI cable 1.0m 4K/8K, UltraHD, eARC, 48Gbps compatible HDMI cable It is backwards compatible and can also be used with devices older than HDMI 2.0 (Murakoshi Yoichi)
Accessories: none
Currently sold. The BEHRINGER DEQ2496 is a digital processor ideal for people who want to make quick and easy settings, since most of the equipment required for a PA system is completed with this one unit. It is a convenient item equipped not only with an equalizer and compressor/limiter, but also with functions that automatically remove frequency correction and feedback (Murakoshi Yoichi)
Maintenance information: 2024.5.9 sound output confirmed (details unchecked)
Accessories: instruction manual, power cord, original box
Main specifications: W480 x H42 x D210 mm 2 kg
2.0m optical cable DVD LINK series optical cable Highly efficient transmission has been achieved through round processing of terminals (Murakoshi Yoichi)
Maintenance information: 2024.5.10 continuity confirmed
Accessories: none
※Since it is an old standard, it is inexpensive. HDMI cable 3.0 m gold plate coated terminal uses a flat structure to avoid signal loss, crosstalk, and timing errors caused by uneven length when bent (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Maintained by the manufacturer in 2022. This model has eliminated unnecessary auxiliary functions and has been thoroughly particular about sound quality. You can enjoy the delicate sound that pursues linearity unique to pure A class. This model has expressive power that you wouldn't think of as a pre-main amp, and is still popular today. Small scratches are scattered on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.8.3 manufacturer maintained (output relay contact deterioration replacement, power switch defect replacement, ultimate attenuator disassembly contact cleaning, power amplifier electrolyte capacitor replacement, styrene capacitor replacement, balance volume contact deterioration replacement, overall board solder rework, comprehensive adjustment, operation characteristic test OK)
Accessories: instruction manual (copy)
Main specifications: pure A grade operation 50W+50W (8Ω) line input 8 systems (RCA x 7/XLR x 1) 2 phono systems (MM/MC) W438 x H176 x D467 mm 30 kg
The A3500 vacuum tube power amplifier has been refreshed by thorough maintenance down to the smallest details, such as volume disassembly and polishing. The warm, fresh tone, filled with the appeal of a vacuum tube type, is still appealing enough today. You can enjoy music with a rich, thick tone that contrasts with the clicking tones of recent vacuum tube amplifiers. As for the exterior, paint deterioration and peeling can be seen on the transformer on one side, and there is a feeling of use such as dullness, small scratches, etc., and there is a dent in the hood. ※3-pole tube connection specification. 20W+20W (actual measurement) is output as specified by the manufacturer (Takasaki Atsushi)
Maintenance information: 2023.2.3 maintained (main tube (6CA7) replacement vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, complete disassembly of semi-fixed VR replacement power input gain volume, contact polishing, anti-oxidation/sulfation grease coating load test (8Ω load 1kHz 20W+20W) input/output waveform confirmation sound output check performed)
Accessories: copy of the manual
Main specifications: 20W+20W (8Ω) vacuum tube 6CA7×4/6AQ8×3 W465×H168×D206mm 16kg
The price has been drastically reduced. 2024/5/12 sales price 129,800 yen Sony 1TB HDD built-in audio player. It reproduces not only high-resolution sound sources such as DSD 5.6 MHz and 192 kHz/24 bits, but also compressed sound sources with high sound quality. If you install the software on your PC or smartphone, you can transfer and operate music data to the HDD. You can also enjoy CDs and MP3s ripped at home with high sound quality. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: remote control, instruction manual (simplified version), power cord, connection cord, original box
Main specifications: High-resolution sound source compatible internal HDD (1TB) playback compatible codec DSDIFF [DSD] /2.8 MHz/5.6 MHz) DSDIFF [DST] DSF/2.8 MHz/5.6 MHz) WAV/maximum 192 Hz/32 bit) AIFF/192 Hz/24 bit) FLAC/192 Hz/24 bit) ALAC/192 Hz/24 bit) WMA · MP3 · AAC · ATRAC (Non DRM) playback frequency Characteristics 2 Hz to 80 kHz audio output (XLR/RCA) EXT terminal (USB type A) W430 x H130 x D390 mm 14.5 kg
DL-103 limited model. “Class 1” LC-OFC wire, which boasts the highest grade of copper, is used for the power generation coil, and the body is made of a special ceramic fiber-reinforced resin with high rigidity, enhancing the purity of traditional monitor sounds. It has an even greater sense of range, and playback with excellent separation at high speed is possible (Murakoshi Yoichi)
Maintenance information: 2024.5.11 sound output confirmed
Accessories: needle cover
Main specifications: MC type 0.25 mV needle pressure 2.2 to 2.8 g Class 1 LC-OFC adopted
Maintained! A masterpiece of the UK Aura along with the original VA-40! Warm and high-quality sound quality has been achieved through thorough circuit simplification. The cleanliness of not using a protection circuit or even a relay switch is reflected in the sound, so you can enjoy clear and natural sound quality. There is a feeling of use such as disappearing characters and scattering on the front panel. Serial 010040 (Takasaki Atsushi)
Maintenance information: 2024.5.11 maintenance (INPUT selector slide SW disassembly contact polishing cleaning contact grease application, tape monitor entry and exit push switch replacement) 2024.1.20 operation confirmed
Accessories: copy of manual, power cord
Main specifications: execution output 50W+50W (8Ω) input/PHONO (MM), LINE 4 system, TAPE input/output equipment W430 × H56 × D313 mm 4 kg
DENON analog player. It is a model that is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. This model is also suitable for introductory use. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 Operation confirmed
Accessories: connecting cable, adapter, dust cover
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Maintained! It comes with a rare hood! A single stereo power amplifier using a 2A3 output tube that made the Sun Audio name popular. You can enjoy the aftertaste of sound and air unique to vacuum tubes. It expresses vocals and string music in a sweet and glamorous manner. It is an affordable and well-built car (Murakoshi Yoichi)
Maintenance information: 2024.5.12 maintenance completed (first stage vacuum tube replacement on the left channel, volume washer, spring replacement, electrolytic capacitor deformation replacement, missing screw installation, excessive abrasive removal, vacuum tube pin cleaning, solder correction, bias check, ham balance adjustment, output check approx. 4W confirmation (currently 8Ω load setting))
Accessories: power cable
Main specifications: rated output 3.5W+3.5W vacuum tube 2A3 x 2 6H8C x 2 5U4G x 1 W360 x D210 x H190 mm 16 kg
The price has been reduced. 2024/5/12 sales price 128,000 yen Maintained! Line-only pre-main amplifier. The output stage is a single-ended, ultra-linear connection that makes the most simple use of the EL34. It has a gentle sound unique to vacuum tubes, and it can be said that it is an attractive product as an interior decoration. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 maintenance completed (main volume replacement, monitor switch replacement, cathode resistor replacement, solder correction, vacuum tube pin cleaning, bias check, each input and output check)
Accessories: instruction manual, cloth cover
Main specifications: output 12W+12W A grade single W275 x H165 x D375 mm 14.0 kg
The price has been drastically reduced. 2024/5/12 AccuPhase CD player with sales price 148,000 yen. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: remote control, copy of manual
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
There is a well-balanced connection between all bands and a good sense of localization, and the three-dimensional grasp of sound is simple and can be reproduced with high quality. I think the AV settings are good along with the other Platinum series, but I think you can enjoy it with 2CH regardless of genre. There are 2 dents on the exterior and top plate, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: zipper cross grill
Main Specifications: Input 20-150W Allowable Input (RMS) 75W Maximum Allowable Input (Instantaneous) 300W Efficiency 87dB (1W/1m) Impedance 8Ω Frequency Characteristics 40Hz to 20kHz (-6dB) LF (Woofer) 165 mm (6.5 inch), Multi-fiber Paper Cone MF (Mid) 165 mm (6.5 inch) HF (Tweeter) 25.4 mm (1 inch) Silk Dome Tweeter Crossover Type 3 Way, low loss passive type, hardwired crossover frequency 350Hz, 2.5kHz enclosure type bass reflex W235×H1,078×D300mm 17.1 kg
Since it is cheap, it will be sold as is. SANSUI left and right independent 10-band equalizer. It is an equalizer that has a high amount of change and can drastically improve sound quality. The red LED for the slide volume is also nice, but above all, if you like the spectrum analyzer in the center, pay attention. The spare aner can switch back and forth between the 3 patterns of Lch, Rch, and both. The intuitive operation makes it easy to create sound quality, and it is a car that can also be enjoyed visually. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: center frequency 32 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz variable range ± 12 dB W430 × H112 × D223 mm weight 3.1 kg
Set of 4 Made from Hokkaido Asada cherry wood and African ebony. It doesn't tighten too much as a metal insulator, and it makes the most of the sound of the music. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W70×D70×H35mm
Speaker cable 2.0m pair with soldered ends. Smooth, soft, silky sound like no other. If you pair it with a recent speaker that has strong sound pressure in the treble range, the corners can be removed moderately, and you can feel a relative sense of volume in the bass range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
Balance cable 1.0m pair stress-free 6N conductors Sound quality that is thicker than AcroLink and has a natural texture that shines with good balance. It is a character that is compatible with a wide range of devices. In addition to cracks in the exterior and plug, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 2-core shield structure, rhodium-plated plug suppresses sound dramatization and reproduces the individuality of the amplifier or player as it is. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
RCA cable 1.5 m pair This cable has excellent bass reproduction and is easy to handle. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
※Only 1 speaker cable 4.0m terminal is a popular sold out speaker cable for the CARDAS entry series, unprocessed (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Sound quality improvement accessory with damping resin sandwiched between metal sheets. By setting it under the audio device, vibration is controlled to improve sound quality. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Mizushima Itsuro)
Accessories: none
Main specifications: W490 x H1.4 x D445 mm
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: main body: W350 x H300 x D330 mm 5.2 kg (actual measurement) Top plate: W320 x D300 mm (actual measurement)
HAMILEX speaker stand for small speakers. Recommended for installing small speakers and adjusting the height. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W230 x H150 x D250 mm 2.0 kg total load capacity 20 kg (1 unit)
※Only 1 speaker cable 1.3 m terminal is a popular sold out speaker cable for the CARDAS entry series, unprocessed (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
The 1.0 m pair series 7 RCA cable uses OCC Copper (high purity copper) with a purity of 99.9999% (6N) similar to Eclipse as the conductor, achieving higher resolution and wider range than the previous model. Cost performance has also been further improved (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
HDMI cable 2.0m HDMI → HDMI High Speed with Ethernet (HDMI Ver 1.4) 3D/HD4K compatible entry class yet has excellent speed performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: original box
An item that improves sound quality simply by placing it on the floor between the speakers! The development period is 30 years, so it's worth trying out. For those who are worried about not being able to tune the way they want with just sound-absorbing materials or reflective materials, please go for it. As far as I've tried it at the store, I have the impression that the high range is slightly milder and the middle range is thicker. There are scuffs on the exterior and bottom, but others are good with little feeling of use (Kobayashi Hitoshi)
Accessories: special aluminum case, special cleaner liquid, cloth, instruction manual
Main specifications: diameter 80mm height 58mm 1.1 kg
The power cable has a 1.0m PSE and uses an unplated WATTGATE plug for the US A2D shielded power cable. It is a high cost performance cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Continuity confirmed
Accessories: none
Popular bookshelf speakers. The rear terminal contains a single passive plate. The overall resolution is high, the sound is clear, the low frequencies are slightly subdued, and the sound is as if the target was set in the mid to high range. Overall, it makes me listen to songs and stringed instruments clearly. There are dents on the exterior, edges, and corners, etc., and a feeling of use can be seen, such as sunburn and 4 holes on the back (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: none
Main specifications: 2-way bass reflex loudspeaker output sound pressure level 85dB/W playback frequency band 75-20kHz impedance 8Ω W170 x H340 x D230 mm 6 kg
Internally and externally maintained! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. There is a very slight dent in the tweeter grill, and there are repair marks on the side (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
High rigidity, high specific gravity, and high vibration damping are achieved by sandwiching cast iron powder on a high-density wooden board. It reproduces thick, stable sound quality without the peculiar characteristics of specific materials. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1,200×H40 ✕ D600mm 22.0kg
Exterior maintenance completed! York Minster, which is low in stock, has arrived. It features an Alnico magnet and a large bass reflex on the back. The sense of scale that exceeds its size and the beauty of the sound of a stringed instrument are attractive. There is a thin line wound on the back and a small dent on the back corner on one side (Murakoshi Yoichi)
Maintenance information: 2024.5.10 maintenance (condition check/contact improvement, exterior cleaning/touch repair)
Accessories: saran net, jumper
Main specifications: 12 inch coaxial 2-way hard edge type bass reflex frequency characteristics 23 Hz to 22 kHz sound pressure level 94 dB impedance 8 ohms W 620 mm x H1080p x D447 mm weight 61.5 kg/book