Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg
*We were able to confirm the simple sound output, but since it is cheap, it is currently sold. A 2.1 channel (wireless subwoofer) system developed to match the company's Bravia X9000F series. The S-Force PRO front surround mechanism virtually creates a three-dimensional stereoscopic sound image without installing a rear speaker. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.13 Operation confirmed (video, remote control, simple BT sound)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: 2.1 ch maximum power output 300W front 100W/100W subwoofer 100W size: bar speaker W930 x H58 x D85 mm 2.5 kg subwoofer W190 x H382 x D387 mm 7.8 kg
Comes with side wood. A masterpiece model of a CD player that reproduces the soft, powerful sound of analog. The thick mid-range and rich analog-like sound quality is a unique appeal. It is a high degree of perfection that can be said to be one of the goals in terms of sound quality among CD players of all time. The exterior is fine with no noticeable scratches over time, and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2017.2.17 Maintained (spindle motor lubrication, height adjustment, all capacitors replaced. Replace the memory backup battery with a super capacity. Tact switch contact cleaning for operation. (Inspection of each operation)
Accessories: instruction manual, power cord
Main specifications: CDM3 mechanism, multi-bit PHILIPS TDA1541D/A converter, 3 analog output systems (XLR x 1, RCA x 2 (fixed/variable)), 1 digital output (AES), 1 clock input/output system (BNC), W320 x H131 x D355 mm, 6 kg
XLR cable 5.0 m male to female details unknown. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg
Maintained! A mid-tier ES series player at the time. It is a CD player with clear sound quality with well-defined outlines typical of Sony. The sound is natural and calm with a sense of stability, so you can enjoy highly flexible sound quality that can be incorporated into various systems. (GOTO Daiki)
Maintenance information: 2024.2.13 Maintained (The belt for opening and closing the tray was replaced after mechanical disassembly due to deformation and deterioration. We cleaned servo mechanisms that were stuck with deteriorated grease and oil, refilled oil, cleaned optical lenses, etc. Output VR organic solvent cleaning and olefin oil coating treatment were performed.)
Accessories: none
Main specifications: CD player equipped with a high-density linear converter system, frequency characteristics 2 Hz to 20 kHz, W470 x H125 x D375 mm, 12.5 kg
Set of 4 can be used not only as a spike holder, but also as a small insulator. It has the high dimensional accuracy and high rigidity required for receiving spikes due to computer-controlled high-precision stainless steel cutting. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Accessories: none
Main specifications: Material: stainless steel; load capacity: 200 kg/piece; weight: 14.7 g/piece
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
High rigidity, high specific gravity, and high vibration damping are achieved by sandwiching cast iron powder on a high-density wooden board. It reproduces thick, stable sound quality without the peculiar characteristics of specific materials. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1,200×H40 ✕ D600mm 22.0kg
High rigidity, high specific gravity, and high vibration damping are achieved by sandwiching cast iron powder on a high-density wooden board. It reproduces thick, stable sound quality without the peculiar characteristics of specific materials. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1,200×H40 ✕ D600mm 22.0kg
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Maintained by the manufacturer! Accuphase mid-size model equipped with phono (MM/MC). Stable sound quality with high S/N, high resolution and high transparency. Also, just like this age, the bass has elasticity and energy, so you can enjoy it regardless of the music genre. There is a feeling of use on the exterior, such as dullness and small scratches. Serial K5X480 (Hiroki Aso)
Maintenance information: 2024.5.12 Accuphase maintenance completed (main volume contact cleaning, left channel, separate switch contact cleaning, foot, felt, capacitor replacement, Comp Subsonic switch replacement, insulation sheet replacement, meter logo, lamp replacement, internal and external cleaning, checking performance of each function, checking pressure-resistant safety)
Accessories: remote control instruction manual power cable
Main specifications: output 100W+100W (8Ω) power consumption 290W 8Ω load rated output 390W phono input 1 system (MM/MC switching) line input 7 systems (balanced x 2 systems, unbalanced x 5 systems) tape system 1 system dimensions W475 x H170 x D418 mm weight 20.2 kg
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Inexpensive because there are many line scratches. The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. Rigidity is high and low frequency tightness can be expected (Murakoshi Yoichi)
Maintenance information: 2024.5.8 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, self-weight 10.6 g
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. The degree is generally good (Kanai Hidetsugu)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: needle cover
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images (Oikawa Tetsuji)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Both the interior and exterior have been maintained and brushed up! The OLYMPUS S8R representing JBL has arrived. The combination of thick, dry low frequencies, the sound of a driver that seems to blow fire, and the 075, which leaves a gritty feeling of realism, is impressive. Please enjoy the real thrill of vintage audio. The exterior is also beautifully finished (Yonejima Satoshi)
Maintenance information: 2024.5.11 Maintained (network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, exterior cleaning. Woofer maintenance: edge replacement, cone paper coating, passive cone paper coating. Exterior repair/polishing/oil finish, front and rear baffle/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. (Detaching the unit, repairing the diffuser)
Accessories: saran net
Main specifications: 3-way 3-speaker passive radiator system low range unit 38cm cone type (LE15A) mid range unit horn type (375) high range unit (075) passive radiator 38cm cone type (PR15) network LX5/N7000 sound pressure level 95dB allowable input 125W dimensions W1,020 x H670 x D510 mm weight 82 kg
※The veneer is peeling, the top plate is undulating, and the grill is indented, so it is inexpensive. This high CP model was released in the 49th year of Diatone's founding. It has a very well-balanced, rounded, and gentle tone. I can do everything from jazz and rock to classical and pop music as an all-rounder (Oikawa Tetsuji)
Maintenance information: 2024.4.15 Operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers, 6.3 ohms, sound pressure level, 90 dB, W380 x H680 x D295 mm, weight 25 kg
The price has been drastically reduced! 2024/4/24 sales price 24,800 yen ※Since it is cheap, it will be handed over as is. A coaxial 2-way speaker that can be enjoyed using sound reflected from the ceiling with a structure directed diagonally upward. You can enjoy playback with Dolby Atmos by adding enabled speakers as height channels based on conventional 5.1 channel and 7.1 channel speaker systems. It can also be used by installing it on a floor-standing speaker such as the company's D-509E. There are scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: original box, saran net
Main specifications: sealed coaxial 2-way speaker 6 ohm 83.5dB 70Hz-38kHz W142 x H136.5 x D238.5 2.2 kg
The price has been reduced. This model uses a non-feedback amplifier circuit using discrete components at a 2024/5/5 sales price of 59,800 yen at the entire stage. High quality parts such as metal film resistors and high quality film capacitors are used in the RIAA circuit. The delicate expressiveness with a smooth, high level of SN typical of recent models is attractive. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: power cable
Main specifications: mm/MC compatible non-feedback equalizer amplifier input sensitivity mm2.5mV/47kΩ or less, MC0.12mV/470Ω W220 x H57 x D228 mm 2.6 kg
The disposal price has been reduced! (Member price not applicable) 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: power cable
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
The price has been drastically reduced! 2024/5/9 sales price 118,000 yen Denon's pre-main amplifier combines popularity and performance. The resolution is even higher than the previous model, and the sound quality is high and the SN is smooth, and it is a powerful machine that combines thickness and energy in the mid to low range. It works flawlessly with all genres of music. As for the exterior, there are scratches on the front and dullness throughout. Serial 031501903 (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, power cord
Main specifications: output 80W+80W (8Ω) PHONO input (MM/MC) size W434 x H181 x D435 mm weight 24 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/6 sales price 150,000 yen This is a focused overseas model headphone amplifier. Operation has been confirmed in a 100V environment. The neutral sound is simple, uncomplicated, natural, and comfortable to listen to. The interface is also rich and easy to use. Serial 3020886-V1-001308 (Fujisawa Yukishi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual (English), power cord, original box, headphone stand
Main specifications: 10 Hz to 100 kHz 32 ohm to 1 kΩ 116 dB W200 × H64 × D297 mm 4.65 kg
An enclosure that imitates a Super Swan. FOSTEX FE-108ES was mounted. It is designed so that the bass reflex port can be opened and closed. There is a feeling of use such as scratches (Daiki Goto)
Main specifications: W380 x H1015 x D345 x mm weight 13.4 kg (actual measurement)
Maintained. This model has been reproduced by utilizing Sansui's technology down to the smallest detail. It's a bold sound, but it also has a very clear outline and is also delicate. There are plenty of pleasant sounds of jazz, rock, soul, etc. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.14 Maintained (switch dismantling and polishing grease, etc. applied (tone, loudness, muting, subsonic, turnover, power amplifier direct, source direct, reck-out, tape switch), balance volume replacement, output relay, headphone relay replacement, power amplifier section transistor adjustment volume replacement, protector capacitor replacement , solder repair, volume, switch cleaning, interior and exterior inspection and cleaning, bias, DC adjustment, operation confirmation. (Balance volume is a reusable product)
Accessories: copy of instruction manual
Main specifications: effective output 6Ω160W+160W, 8Ω130W+130W power amplifier direct circuit (with both balanced and unbalanced inputs) PHONO (MM/MC) dimensions W460 x H159 x D446 mm weight 22.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/6 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance information: 2024.4.15 Maintained (1 deteriorated transistor has been replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. (Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, Remo pin x 2, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
The price has been reduced. 2024/5/15 sales price 298,000 yen Orthophone Japan has been maintained! One owner item! It is a system equipped with the company's WTB-211 tonearm. The sound quality created by the wooden base and heavyweight metal turntable is a player that achieves well-balanced sound quality from low to high frequencies. It is a system that can be used stably without the need for frequency conversion (pulley), and allows you to fully sense not only the MM needle, but also the delicate nuances of the MC needle (Oikawa Tetsuji)
Maintenance information: Maintained by 2024.5.11 Orthophone (bearing replacement, correction process, operation confirmed)
Accessories: power cable, strobe, instruction manual
Main specifications: thread drive speed 45/33 W 470 x H250 x D370 mm 35.5 kg tone arm execution length 229 mm effective length 214 mm overhang 15 mm compatible cartridge weight 18 g to 26 g (shell cartridge included)
The disposal price has been reduced (member prices are not applicable). 2024/5/12 sales price 148,000 yen B&W middle class “tweeter on top” model from the new commercial series. You can enjoy high-response sounds and vivid and realistic spatial expressions. The exterior has scratches, line wounds, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.12 operation confirmed
Accessories: instruction manual
Main specifications: 8Ω 88dB 45Hz to 50kHz W200 × H403 × D301 mm weight 8.9 kg
The price has been drastically reduced. 2024/5/13 sales price 148,000 yen B&W middle class “tweeter on top” model from the new commercial series. You can enjoy high-response sounds and vivid and realistic spatial expressions. There is a thin scuff (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: jumper plates, spikes
Main specifications: 8Ω 88dB 45Hz to 50kHz W200 × H403 × D301 mm weight 8.9 kg
Although it is a standard model, you can perform SACD playback that is not inferior to higher-level models, and you can clearly experience glossy sound in the mid and low frequencies typical of Denon. Dullness can be seen throughout, but there are no noticeable scratches. Serial 8051508325 (Fujisawa Yukishi)
Maintenance information: 2024.3.31 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: CD/SACD compatible AL24 Processing playback frequency band 2Hz to 100kHz (SACD) 2Hz to 20kHz (CD) SNR 104dB (SACD) 110dB (CD) W434 × H135 × D331mm 7.6 kg
Maintained! The balance between thickness and sharpness of the sound is good, and the sound conveys the breath of jazz and rock. The thick sound image and rich mid-range, which cannot be enjoyed with today's amplifiers, are exquisite. The range is moderate but the Old McKinn sound has instantaneous power. The slightly smokier tone than the MC2500 is attractive. As for the exterior, in addition to wear and tear and dullness over time, yellowing can be seen. Serial 5Y353 (Yamato Yuki)
Maintenance information: 2024.5.9 maintained (power stage Tr short, output boat, Tr in input board, capacitor, lamp broken, RCA, switching SW replacement SW, VOL cleaning, input shield cable ground solder treatment)
Accessories: Power cord, copy of English instruction manual
Main specifications: 300W+300W (mono 600W) 0.5 to 16 ohms W483 x H267 x D432 mm 58.1 kg
The price has been drastically reduced! 2024/5/10 sales price 138,000 yen Maintained by Luxman Service in 2022! LUXMAN pure A class power amplifier. A familiar luxe stone that combines a unique sense of temperature and smoothness. The construction unique to the bubble period gives a sense of scale and thickness in the low range. It allows me to thoroughly enjoy the music. The exterior has scratches and some cracks on the back of the cabinet. Serial A71210129 (Fujisawa Yukishi)
Maintenance information: 2022.11.25 manufacturer maintained (attenuator disassembly, contact cleaning. Attenuator and knob installation reworked. Foundation solder correction. Internal cleaning. (General adjustment)
Accessories: copy of instruction manual
Main specifications: stereo output 55 W+55 W (8 ohms) pure A grade operation, mono output, 220 W (balanced input), frequency characteristics, 5 Hz to 300 kHz, damping factor, 100 S/N ratio, 110 dB, balanced input terminal, direct reading type level indicator, W444 x H211 x D417 mm, 22 kg
Maintained in 2023/4. The highest-grade cassette deck equipped with dbx. The power supply unit and amplifier section have been thoroughly strengthened, and the sound quality as a cassette deck has been further enhanced. The clean sound without exaggerating too much is attractive. As for the exterior, there are scratches and dents on the top plate. Serial 20315-11138 (Yonejima Satoshi)
Maintenance information: 2023.4.10 Maintained (replacement of consumables such as belts. Grease up moving parts, starting around the head. Tape path, head azimuth adjustment, tape speed inspection. Pinch roller and head cleaning)
Accessories: No accessories
Main specifications: 3 head frequency characteristics 20Hz to 21kHz W475 x H112 x D353 mm 7.3 kg
The price has been reduced. 2024/4/29 sales price 110,000 yen The 3 channel 5 units are nicely put together in one package. In addition to the fact that a rich sound field can be simply played back via Bluetooth, etc., it is a product with an emphasis on functionality that can also be enjoyed with analog. Recommended for studio users. Other than the exterior and stains on the top plate, it's fine (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: remote control, power cord
Main specifications: 33mm pure pulp cone woofer x 2, 25mm aluminum dome tweeter x 2, 100mm pure pulp cone center midrange x 1 input HDMI (ARC), 3.5mmAUX, RCA Phono (MM), Ethernet/WiFi Bluetooth playback frequency characteristics 45Hz to 25kHz (-6dB) W790 x H216 x D287mm 15.9 kg
The price has been reduced. 2024/5/4 sales price 39,800 yen Speaker developed in collaboration with an Italian furniture manufacturer. The sound is delicate and calm, and it is a speaker that allows you to soak in the music for a long time. In addition to corrosion on the exterior and terminals and stains on the saran net, a feeling of use can be seen such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 2 speakers, bass reflex, bookshelf type, anti-magnetic design, 45 Hz to 30 kHz, 86 dB, 8 ohms, W230 x H350 x D335 mm, 9.5 kg
The price has been reduced. 2024/5/3 sales price 29,800 yen A compact bookshelf speaker equipped with a high-resolution “Terylene Dome Tweeter.” It achieves clear, high-definition treble. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual, original box, saran net
Main specifications: Playback frequency band 44Hz to 40kHz impedance 4Ω W192 x H306 x D259 mm 5.9 kg
Over 300 deteriorated parts, including 133 transistors and 65 capacitors, have been replaced and maintained! Shell (AT-LH15/OCC) with cartridge (AT-F3/2). A supreme record player made by combining the best of Yamaha's engineering. In addition to adopting a linear tracking system, what is surprising is the amount of material that was put in without hesitation. The total weight of the main body alone is 27 kg, and the turntable made of super duralumin cut from solid wood weighs 5.6 kg. The well-structured low range and the delicate, clean sound that spans the entire range are remarkable. The smooth operation feeling of auto play and multifunctionality such as pitch control are also attractive. There are small scratches and dullness, but it is a beautiful category even when viewed from the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.14 Maintained (replacement of deteriorated parts, re-soldering of each board, board cleaning, volume disassembly cleaning, circuit adjustment of each part, operation check, sound test)
Accessories: power supply unit, screw, shell (AT-LH15/OCC), cartridge (AT-F3/2)
Main specifications: Direct drive system motor 20 pole 15 winding slotless DC motor tone arm/dynamic balance linear tracking arm mounting cartridge dead weight range 4 to 13 g rated power consumption 27 W body/W480 x H154 x D416 mm 27 kg power supply/W124 x H90 x D385 mm 5 kg
Maintained! A power amplifier with a characteristic large meter. A straightforward tone with no peculiarities. There is momentum unique to the 80s, and you can enjoy crisp sound quality. It is also ideal as an introduction to separate amplifiers. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.14 maintained (output relay, meter relay replacement, indicator lamp replacement, meter lamp replacement, volume replacement, operational amplifier replacement, solder repair, interior and exterior inspection and cleaning, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) 170W+170W (4Ω) frequency characteristics 1Hz to 100kHz impedance 4Ω to 16Ω W450 × H174 × D422mm 18.5 kg
TAOC rack underspacer and upper spacer set. If you have a spare or lost one, don't miss it. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Key Specifications: 6 upper spacers, 2 underspacers, 3 cast iron knurled nuts
*Currently sold. Details of Sony's 15 cm full range unit pair are unknown, but there is a description of i-502-437-11 on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
*Currently sold. Details of only one Sony 15 cm full range unit are unknown, but there is an I-502-437-11 description on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
A pioneer hard dome tweeter that uses a beryllium diaphragm as the diaphragm. It achieves flat characteristics and excellent transient characteristics up to 55 kHz, which greatly exceeds the audible band. The exterior has small scratches and dullness. (FUJISAWA KOSHI)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: No accessories
Main specifications: impedance 8 ohms frequency band 2.5 kHz to 55 kHz maximum input 40 W rated input 20 W output sound pressure level 91 dB body diameter 70 x 82 mm weight 1 kg (cover included)
F series tall boy speaker from British Celestion. It can be used for a wide range of purposes, from AV systems to pure audio. It is a bright tone with a pleasant drop and spread of the midrange. There is no effect on operation, but there is a dent in the mid-range center dome on one side. (FUJISAWA KOSHI)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual (English characters), saran net, spikes, jumper plates
Main specifications: 3-way bass reflex type output sound pressure level: 90db 8Ω W264 × H920 × D342 mm 20 kg
Direct drive analog turntable Equipped with a knife-edge tone arm in collaboration with SAEC. A Sumiko Oyster cartridge is also included, and it also has a built-in phono equalizer, so you can enjoy records right away. The exterior is good with no noticeable scratches. Serial 2280200 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual, AC adapter, connection cord, cartridge, head shell, original box
Main specifications: direct drive aluminum die-cast static balance type S-shaped tone arm length 223 mm needle pressure variable range 0 g to 5.0 g applicable cartridge mass 3.0 g to 12.0 g, 14 g to 23 g (including attached headshell) cartridge part: mm type output voltage 4.0 mV needle pressure 1.5 to 2.5 g mass 5.3 g analog output terminal: RCA pin jack (phono/line switching type) W420 x H117 x D356 mm Weight approx. 6.1 kg
Torrens entry model. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for entry-level belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type