The SINTRA series, which is Lloyd's hidden masterpiece, and the rare SINTRA IMPROVED have arrived. Using a dome tweeter jointly developed with SCAN SPEAK, a uniquely designed bass reflex port reproduces clear sound with reduced resonance. The sound absorbing material around the tweeter is peeling off, there are small scratches, and dents (Daiki Goto)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: original box
Main specifications: 2 way 2 speakers, 8 ohms, W305 x H203 x D190 mm, weight 7.8 kg (actual measurement)
This is Sun Valley's Western 91 300B single amp. It plays an expansive and powerful sound, and although it has an output of 8W+8W, it is a very practical and high quality model. The balanced yet glossy tone from low to high frequencies is attractive. The internal relay has been modified, and the power supply can be switched on and off with a single switch. There is writing on the main body (Sasaki Shota)
Maintenance information: 2024.5.18 Maintained (missing screws added. Subchassis installation defect correction. Fix solder defects. Vacuum tube pin cleaning. Condenser position correction. Solder dregs and wire breakage scum removed* Bias checked and output sound checked. (Current load IMP is set to 8 ohms)
Accessories: manual, power cable
Main specifications: output 8W+8W vacuum tube 300B ✕ 2 310A x 4 5U4G ✕ 1 W400 x H210 x D300 mm weight 23 kg
※There is no problem with operation, but since it is cheap, it is being handed over as is. A speaker that uses a silk OMF diaphragm. The response is fast, and the mid to high range sound is produced well. The impression is that it is suitable for female vocals, jazz pianos, etc., and has a luxurious real wood veneer finish. Serial 5990510607/5990510607 (Tomoho Asaine)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: saran net
Main specifications: 2-way bass reflex, 4 ohms, frequency band 45 Hz to 35000 Hz, W180 x H305 x D270 mm, 5.1 kg
Scarce! Vintage join Made In GDR (former East Germany) 20cm full range speaker. I immediately rang it at the storefront. It's an old full range speaker, so to be honest, the high and low frequencies don't come out at all compared to modern speakers, but the old piano trio is a perfect match and the mid-range is rich. The speaker has an attractive, soft, and deafening sound without making a harsh sound. There are scratches on the corner of the cabinet, and there are small scratches and line scratches overall (Sasaki Shota)
Maintenance information: 2024.5.18 Sound output operation confirmed
Accessories: none
Main specifications: 20cm full range 5Ω W315 x H525 x D210 mm 9.1 kg (actual measurement)
※ It is inexpensive because the saran does not break or the LF+ speaker terminal on one side does not tighten until the end. Slim tall boy speaker. MONITOR AUDIO's middle class, SILVER series, is now in stock. The RS8 has a delicate, highly clear mid to high range tone with good tightness in the low range. The owner has well-balanced characters that can be used from the living room to the tatami room. In addition to dullness and small scratches on the exterior, there is a feeling of use such as a tear on the saran net and sunburn on the main body. Serial 801702/801702 (Tomonori Asae)
Maintenance information: 2024.5.17 sound output checked (good sweep test)
Accessories: Saran net jumper cable (general purpose)
Main specifications: Format: 2.5-way 4 speakers, floor type (anti-magnetic), front & rear port, bass reflex impedance, 6 ohms, allowable input, 175 W, efficiency, 91 dB, frequency characteristics, 33 Hz to 25 kHz, W185 x H900 x D 270 mm, weight 21.0 kg
GT SONIC's compact ultrasonic cleaner for commercial use. It's not for audio only, but it seems that it can be used for quite a variety of purposes. I think the size is good too. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cord, original box
Main specifications: ultrasonic power consumption 150 W power supply AC 100-120 V 50/60 Hz ultrasonic frequency 40,000 Hz cleaning tank size: W155 x H150 x D300 mm body size: 180 x 310 x 330 mm 5.9 kg
Maintained by the manufacturer! It is inexpensive because it has 230V specifications. Please use the included step-up transformer. The sound with a firm outline and no hesitation is unique to VRDS. The freshness of the sound and the straight sound image are advantages that cannot be obtained on CDs in recent years (Sasaki Shota)
Maintenance information: 2024.5.18 Maintained by the manufacturer (The function switch has been replaced. Gears and belts have been replaced. Each part has been inspected and adjusted)
Accessories: remote control, manual, power cable, original box, step-up transformer, insulator
Main specifications: 20-bit DAC dimensions W442 x H145 (153 mm when using foot) x D344 mm weight 16.5 kg
Genuine RF Enterprise with side panels Equipped with Philips CDM4PRO, this player is easy to operate, has plenty of professional features, and excellent durability. It has a thick, supple sound reminiscent of a record, and the intensity of the mid-range is outstanding among many CD players. There are no visible scratches on the exterior, etc., and it can be said that it is good over time (Kobayashi Hitoshi)
Maintenance information: 2014.6.12 maintained (back UP battery fluid leak, poor insulation → battery removal, insulation treatment, supercapacitor replacement, other analog part bypass C, coupling C replacement, front button all dismantling, contact all polishing, operation check)
Accessories: instruction manual, power cord
Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
A Sony ES class stereo integrated amplifier aimed at high-quality music playback. We are particular about high-resolution playback, and are reviewing basics such as high-capacity power supplies and high-rigidity symmetrical chassis. Also, there is impedance switching for headphone users, making it convenient as a high-end headphone amplifier. The sound quality is clear and clear. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: remote control, manual, power cable
Main specifications: audio input RCA x 4, XLR x 1 (No. 2 HOT) practical maximum output 120+120W rated output 80+80W, speaker compatible impedance 4 to 16 ohms, W430 x H130 x D420 mm, 17 kg
※Since the terminal is broken in one place, it is inexpensive. Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. There are scratches and dullness on the exterior. Serial 121-1 G1 (Satoshi Yonejima)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
※ It is inexpensive because it is in poor condition such as dirt and felt peeling. Set of 3 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. The exterior has rust and dirt due to aging, and deterioration in the bottom felt (Satoshi Yonejima)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Maintained. We have everything from modular units 0 to 4! Very easy to use channel divider. It is possible to switch from 2 way to 4 way with a single switch, including switching the crossover frequency. As for the exterior, there is a scratch on the upper front. Serial 200731 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (ATT disassembly click mechanism reassembly, mute relay replacement, resistor replacement, missing screw added. Solder correction switches, cleaning wire, restyling. Check all crossover units check frequency characteristics)
Accessories: instruction manual, modules 0 to 4
Main specifications: 2/3/4 way crossover variable frequency Bessel function filter W480 x H80 x D 400 mm 8.5 kg
5cm full range enclosure It's a backroad type and small, perfect size for those who want to play. It seems to be useful for desktops, etc. There are stains and bumps on the exterior (Tamura Eiji)
Maintenance information: 2020.12.30 sweep test good
Accessories: No accessories
Main specifications: baffle hole diameter φ54 mm W127 x H154 x D170 mm weight 1.0 kg/1 bottle
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2509-1G2 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Speaker cable is a current CARDAS entry series speaker cable with an unprocessed 4-core structure with 1.5 m pair terminals. Use Perfect Surface Copper. The high frequency extension of the single line and the Ritz line is an appeal that cannot be obtained anywhere else. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: No accessories
Mono exclusive MC cartridge. It's not flashy, but it stretches and makes a gentle sound that is pleasant. There is a feeling of use such as dullness (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.5 mV needle pressure 2.5 to 4.5 g dead weight 5 g
※For business use, it will be handed over as is. Although it has a compact body, it is a professional power amplifier that can output 60 W/channel with an 8 ohm load. The driving power that easily drives small to medium class speakers is attractive. It can also be used as a 200W/8Ω mono amplifier with a bridge connection. The exterior is dull. Serial 2B-213896 (Yonejima Satoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W W482.5 x H44.4 x D254 mm 8 kg
It is a DIGIMASTER X64.4 linked to the famous 2000SH4 series. The thick, elastic sound unique to WADIA's heyday is attractive. It is a high-end aircraft of the time with high musicality, and also has intense colors. The exterior is dull. The exterior has scratches, etc. Genuine AXISS Serial 1 2011-90 (Yonejima Satoshi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: copy of instruction manual, power cable, connection cord
Main Specifications: Sledgehammer Buffer Drive Resampling Rate 64X Resolution 18 Bits CPU Power 72 MIPS Sampling Frequency 32/44.1/48kHz Input: 2 Coaxial (BNC) Systems, 2 Optical Systems Output: 1 Unbalanced (RCA) System, 1 Balance (XLR) System W486 x H89 x D381 mm Weight 12 kg
※1 bottle only. Woofer for the famous Japanese instrument 2S-305. The Alnico magnet makes a pleasant low frequency. How about for repairs or for a new system? The urethane part is defective due to deterioration. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: No accessories
Main specifications: Alnico magnet, 30 cm, 8 ohms, 20 W, 40 Hz to 1500 Hz, diameter: 313 x depth: 168 mm, weight: 8.5 kg
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Flat speaker with 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg [actual measurement)
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
Maintained by the manufacturer. It has an aspect as an entry model, but it is a model where you can fully enjoy the uniqueness of Accuphase. In addition to the wide range, it is supple and has a slight sex appeal, so you can enjoy it for 12 minutes. A powerful unit that sounds regardless of whether it is a large or medium speaker. In addition to conspicuous marks on the exterior and top plate, a feeling of use such as dullness, stains, and threads can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.17 manufacturer maintenance (push switch, volume, etc., cleaning, parts replacement, decorative plate installation, inspection of each part, adjustment, safety check, pressure resistance check)
Accessories: power cable, remote control, manual
Main specifications: 100W+100W (8Ω) parallel push-pull output stage current feedback amplifier circuit W475×H170×D424mm 21.4 kg
RCA cable 1.0m pair 6N oxygen-free super annealed The cable is soft, so it's easy to handle. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: none
An OFC copper wire/OFC copper wire horizontal shield is used for the masterpiece “Negrex 2497” 1-core shield wire/core wire recommended by Mr. Kaneda for a 1.0 m pair of RCA cables. The sound quality is flat and well-balanced (Tomonori Asae)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, PCOCC conductor, it is a clear, well-contoured sound typical of Audio-Technica. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: none
Limited edition model commemorating the 50th anniversary of the release of the SL-1200 series. Beige color type. It is a 50th anniversary design that keeps the basic performance of the SL-1200MK7, has a gold tone arm in 7 color variations, and a plate with the “50th Anniversary” inscription and serial number engraved on it. With the main unit switch, 78 rotations and reverse rotation playback are also possible. The dust cover hinges are not original. Serial GM2JA001051 (Tomonori Asaine)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: manual, power cord, phono cable+earth wire, original box, slip mat, dust cover
Main specifications: 33/45 rotations (78 rotations are set with a changeover switch) universal S-shaped tone arm static balance type applicable cartridge mass 5.6 g to 12.0 g/14.3 g to 20.7 g (including headshell) W453 x H169 x D353 mm approx. 9.6 kg
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness or oxidation. (ASAINE Tomonori)
Accessories: none
A semi-permanent contact conductive agent that made krypton a major. Carbon+Diamond Ultrafine Particles It's about half a bottle in it (Murakoshi Yoichi)
Accessories: package
Pioneer perforated headshell Carbon fiber molding The shell is lightweight, has just the right length on the finger, and is easy to use. The exterior is dull and has a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: none
Main specifications: dead weight 8.7g
The disposal price has been reduced (member prices are not applicable). 2024/5/15 sales price 298,000 yen Orthophone Japan has been maintained! One owner item! It is a system equipped with the company's WTB-211 tonearm. The sound quality created by the wooden base and heavyweight metal turntable is a player that achieves well-balanced sound quality from low to high frequencies. It is a system that can be used stably without the need for frequency conversion (pulley), and allows you to fully sense not only the MM needle, but also the delicate nuances of the MC needle (Oikawa Tetsuji)
Maintenance information: Maintained by 2024.5.11 Orthophone (bearing replacement, correction process, operation confirmed)
Accessories: power cable, strobe, instruction manual
Main specifications: thread drive speed 45/33 W 470 x H250 x D370 mm 35.5 kg tone arm execution length 229 mm effective length 214 mm overhang 15 mm compatible cartridge weight 18 g to 26 g (shell cartridge included)
Maintained! The strength of the extrusion of the entire range and the clear sound are truly sounds unique to the heyday of JBL. The mid-high range with a unique sense of spaciousness and strong linearity makes hard bop and trumpet sounds pleasant. The sense of volume in the mid to low range is also attractive not found in modern speakers. The exterior has been beautifully finished due to maintenance (Mizusaki Ryo)
Maintenance information: 2024.5.11 maintained (exterior repair/polishing/oil finish, front and rear baffle/horn repair/painting, saran net replacement/frame repair, woofer edge replacement, driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, unit detachment)
Accessories: saran net
Main specifications: 2-way bass reflex, 30cm woofer, frequency band, 40Hz to 16kHz, impedance, 8Ω, sound pressure level, 91 dB, dimensions W406 x H635 x D311 mm, weight 26 kg/book
Quadra Spire Center Speaker Stand This stand allows you to adjust the angle according to the listening position. As for the exterior, felt is attached to the bottom (Tamura Eiji)
Accessories: No accessories
Main specifications: W375 x H111 x D290 mm
XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 continuity confirmed
Accessories: none
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
Unfortunately, production of the 4312 monitor is a miniature bookshelf speaker. It is a speaker with dry low frequencies, sharp high frequencies, and a compact yet comfortable speaker that can be played energetically like a JBL. The exterior has dullness and slight sunburn on the back corner. Serial FY0009-008869, FY0009-008870 (Murakoshi Yoichi)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: saran net
Main specifications: 3-way bass reflex system bookshelf frequency characteristics 55 Hz to 50 kHz crossover 7 kHz, 12 kHz impedance 6 ohms output sound pressure level 90 dB W181 x H300 x D180 mm 4.0 kg
Maintained! Original Model 7 You can enjoy a glossy mid to high range sound with a high sense of transparency and a thick, exquisite balance. It's a model that has been over half a century since it went on sale for analog fans, but it's still one they admire. The lustrous, indescribable tone is an appeal that cannot be enjoyed on modern devices. You can see a feeling of use, such as appearance, dullness, small scratches, etc. Serial 7-14836 (Kobayashi Hitoshi)
Maintenance information: 2023.5.20 maintained (balance volume B curve → MN curve replaced, block capacitor, 50 μF x 3, oil capacitor, 0.1 μF, other deterioration replacement, 8 electrolytic capacitors, 200 μF deterioration replacement, 2 vacuum tubes, 12AX7 deterioration replacement, 2 shield case replacement, high pressure selenium deterioration countermeasures → diode addition, side pad deterioration exchange, vacuum tube socket and RCA jack caulking repair, etc. Operation has been checked with AC 100 to 117 V)
Accessories: none
Main specifications: tubular control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, weight 7.5 kg
The price has been drastically reduced! 2024/5/15 sales price 128,000 yen LINN network audio player with integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1220444 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
1 set of 4 Y rugs It is a screw-tightened metal Y lug terminal that can be easily fixed and is compatible with various core wire diameters and terminal diameters. There is dullness (Mizushima Itsuro)
Accessories: none
Main specifications: core wire strand diameter 1.5 to 4.0 mm, terminal diameter up to 6.0 mm
The disposal price has been reduced! (Member prices are not applicable) 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8,000 Hz maximum input 40W 8Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
The price has been drastically reduced! 2024/5/15 sales price 128,000 yen LINN network audio player with integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1234701 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/5/13 sales price 2,780,000 yen ※ It is cheap because there is a scratch on one side. This is an 802D3 piano black. An innovative model boasting the highest performance among B&W speakers. The sound field space is large, and the transparent and natural sound makes you forget that the speaker exists. Serial 16020001725/16020001726 (Yonejima Satoshi)
Maintenance information: 2024.5.13 sweep test good
Accessories: instruction manual, jumper cable, saran net, spike base, cleaning cloth
Main specifications: 3-way 4-speaker bass reflex type 8Ω 90dB 14Hz to 35kHz W390 x H1212 x D583 mm (legs not included) 94.5 kg
The price has been reduced! 2023/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
NAGAOKA stylus cleaner. This is a standard cartridge cleaner product and an easy to use and convenient item. It's a volatile and safe cleaner. About 80% of the remaining amount is left (Yamato Yuki)
The price has been reduced! 2023/5/16 sales price 118,000 yen with LS STAND 70 (list price 48,000 yen). This model won the Audio Famous Equipment Award 2005 Speaker System Small Category Award. An excellent balance between the robustness of the enclosure and the suppleness of the unit group. A practical model with attractive spatial expressiveness and accurate sound images that don't make you aware of the presence of a speaker. There are scratches and bumps on the exterior. Serial 37038E002557/37038E002558 (Yonejima Satoshi)
Maintenance information: 2024.5.15 sweep test good
Accessories: instruction manual saran net spike fixing screw
Main specifications: 2-way bass reflex woofer 115mm aluminum hybrid cone tweeter JETIII crossover frequency 3,000 Hz input rating 70W/maximum 90W frequency characteristics 42-50,000 Hz efficiency 86dB impedance 4Ω dimensions W123 x H208 x D282 mm (when grille attached) weight 6.5 kg LS STAND 70: H700 x W240 x D290 mm top plate W75 × D210mm weight 6kg/set
The disposal price has been reduced! (Member prices are not applicable) 2024/4/21 sales price 99,800 yen DALI's HELICON series center speaker. If you use the company's HELICON series and are considering surround, please give it a try. The exterior is dull. Serial 7660180 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: original box, saran net
Main specifications: 4Ω playback frequency band 49Hz to 27kHz W650 ✕ H210 ✕ D435mm weight 18.4 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The price has been reduced! 2023/5/11 sales price 49,800 yen ※Since manufacturer repairs are not possible, it will be sold as is. The remote control is now in stock. It is a compact premain amplifier equipped with plenty of inputs in a 214mm half-size housing. Compatible with a total of 3 digital inputs, 1 optical 2 coaxial, USB input up to 192 kHz/24 bit, and Bluetooth audio transmission. It is compatible with all kinds of music sources. The exterior is dull. Serial 53330E001473 (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (English characters), power cord, remote control
Main specifications: output 80W x 2ch (4Ω) output terminal subwoofer x 1/headphone x 1/input terminal LINE x 2/COAXIAL x 1/OPTICAL x 2/USB x 1 digital input USB maximum 192 kHz/24 bit COAX/OPTICAL maximum 192 kHz/24 bit other Bluetooth audio compatible (A2DP with aptX) W214 x H60 x D284 mm mass 2.8 kg
The price has been reduced! 2023/5/15 sales price 19,800 yen A new-concept connected tap equipped with a surge absorber (lightning protection) and noise filter in one package. It has contributed greatly to further improvements in S/N and sharp sound quality that is transparent yet makes you feel dynamic. There are no noticeable scratches on the exterior. Serial 38600KK042 (Yonejima Satoshi)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: W56 x H35 x D233 mm (including connected outlets) 620 g