The disposal price has been reduced. Member discounts are not applicable. 2023/8/26 sales price 5,000 yen. Mini jack to mini jack cable 2.0m This is a power control connection cable that can simultaneously control the power on and off of Macintosh components and the on/off of meter lights. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2023.8.25 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
The price has been reduced. 2023/2/10 sales price 5,000 yen. This pan lock is used when storing an amplifier in a wooden case. There are 2 10-inch and 12-inch bracket positions, and amplifiers of 2 different sizes can be attached. The models that can be used are not known here, so please carefully check the target products to be used before purchasing. There is a feeling of use and scratches on the exterior (Hiura Katsutsugu)
Accessories: none
Main specifications: W30 x H110 x D330 mm Weight approx. 400 g
The disposal price has been reduced. Member discounts are not applicable. 2024/1/30 sales price 25,000 yen. This is a wood cabinet for large panel power amplifiers such as the Macintosh MC7300. The front interior dimensions are 432 x 166 mm. The product is compatible with non-panlock specifications, and the panlock is missing. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 4 panlock mounting screws
Main specifications: W467 x H203 x D368 mm 5 kg (actual measurement)
A dust cover of the same size as the C-91 compatible with MICRO's BL-91, BL-99V, and SX-111FV. It is a sturdy construction with a thickness of 4 mm. There is an abrasion on the front (Murakoshi Yoichi)
Accessories: none
Main specifications: W523 x H100 x D410 mm
The price has been drastically reduced. 2023/11/8 sales price 49,800 yen ※The display panel moves when the volume etc. switch is pressed, but this is a specification. Maintained! MICROMEGA D/A CONVERTER It's a well-balanced European tune, and you can listen to chamber music and vocals smoothly. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.3 Maintained (replacement of tantalum electrolytic capacitors, replacement of other capacitance electrolyzed capacitors. Various digital signal demodulation tests confirm normal operation. (Rubber foot replacement)
Accessories: none
Main specifications: 1-bit input sampling frequency 32kHz,44.1kHz,48kHz W220×H55×D110mm 1.5kg
Interconnect cable, 0.6 m pair, this is a standard cable for microphone cables without terminals. It also features soft sound quality and ease of handling (Murakoshi Yoichi)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/4/27 sales price 79,800 yen This is a 3-way center speaker with the tuning that best matches the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
The 1.5m pair of speaker cables are connected with crimp terminals, and the Cobra Silver Line is a wide, thick type. Silver wire coating There is strong dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
1 PIN is missing and only 3. Monster Cable's crimping banana plug has an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: crimping type φ4 mm
Equivalent to the Hitachi DS-5T. Replacement needles for HRD-100 and HRD-101 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: none
Equivalent to TRIO N-39. Replacement needle for N-39 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Compatible with the Nagaoka N-30. Replacement needle compatible with V-30 and T-30 cartridges. There is no main unit and operation has not been confirmed (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a Ronet needle for SP common to all companies. Unopened, operation unconfirmed (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
PIONEER PN-131 compatible replacement needle Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Set of 5 LP/SP switchable replacement needle for Columbia PU-1270, PU-1280, and SPC-310 DTS-2 compatible Unopened, operation unconfirmed (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle for the National EPC-05sta cartridge. Unopened, unchecked (Murakoshi Yoichi)
Maintenance information: unopened
Accessories: original box
2-row 6-piece outlet plate made of corrosion-resistant aluminum alloy+fully coated new metal There is a feeling of use such as small scratches (Kanai Hidetsugu)
Accessories: none
Main specifications: W120 x H116 x D6.5 mm weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A subwoofer directly related to ONKYO's flagship. Exterior, rubber is attached to the four corners of the top plate, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: frequency characteristics 32 Hz to 1 kHz W225 × H295 × D310 mm 7.1 kg
*Remote control is out of stock. Maintained! Onkyo's unique supercurrent amplifier configuration is used for the power section, and the smooth sound is impressive with a circuit that combines a MOS FET and a bipolar transistor. The sense of power in the low frequencies and the extension in the high frequencies play a slightly different sound from the others. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Maintenance completed (switch disassembly, contact polishing, contact cleaner application. Soldering correction for each circuit board)
Accessories: instruction manual
Main specifications: 80W+80W (8Ω) W455 × H170 × D430 mm 17 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A subwoofer directly related to ONKYO's flagship. On the exterior, rubber is attached to the four corners of the top plate, and a feeling of use can be seen, such as dullness and scuffs on the entire surface (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: frequency characteristics 32 Hz to 1 kHz W225 × H295 × D310 mm 7.1 kg
Sound output has been confirmed, and since it is inexpensive, it is currently sold. This speaker was designed for the company's FR-N Hi-MD components. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: none
Main specifications: W167 x H290 x D230 mm 3.9 kg (actual measurement)
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer system with a built-in amplifier that uses a dual drive system with a 16 cm woofer unit mounted on both the left and right sides. It is equipped with a switch between Music and Movie, and you can select the playback mode according to the Hi-Fi/Theater genre. You can see a feeling of use on the exterior, holes in the saran net, and dullness, abrasions, etc. all over (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: none
Main specifications: 1 way 2 speakers with built-in amplifier, sealed system, anti-magnetic type, 16 cm cone type x 2, playback frequency range 30 Hz to 200 Hz, high cut filter, variable in the 50 Hz to 200 Hz range, W285xH381xD347mm, 11.5 kg
*Currently sold. ONKYO 2-way speaker The sound quality is sharp, has a clear impression, and has a sense of stability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 operation confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex bookshelf type woofer, 12 cm, cone type tweeter, approx. 2 cm, dome type impedance, 6 ohms, maximum input, 80 W, W193 x H340 x D270 mm, 5.2 kg
*Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net
Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
This is a pre-main amplifier that allows you to enjoy everything from analog records to the latest high-resolution sound sources with high sound quality. The sound is clear and highly transparent, and it outputs music with a high sampling rate even more attractively. An independent dedicated board phono equalizer compatible with MM/MC is used. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 4Ω/60W+60W 8Ω/30W+30W practical maximum output 90W+90W frequency characteristics 10Hz-100kHz W435 x H139 x D331 mm 9.2 kg
ONKYO DN-39ST compatible. This is an OC-39 compatible replacement needle. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2023/2/5 sales price 2,000 yen. *Currently sold. Specification details of only one Onkyo full range unit are unknown, but it was able to sweep and make sound. The exterior has dirt, dullness, and tape marks (Katsuji Hiura)
Maintenance information: 2023.2.5 sound output confirmed
Accessories: none
Main specifications: diameter 120 mm, depth 71 mm, screw pitch 219 mm (actual measurement), weight 1.2 kg
※Since the cantilever is large and tilts to the right, it is inexpensive. Needle cover missing. The MC30S (MC30 Supreme), the upper model of the MC20S (MC30 Supreme) has a high output of 0.5 mV, which not only has a sense of dynamism and power, but is also characterized by a delicate and elegant high frequency. In classical music such as jazz and rock, there is a sense of depth in the performance, and it stretches well, and you can feel the luster of stringed instruments. There is a feeling of use on the exterior, such as dullness and scratches on the body (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output
Accessories: case
Main specifications: MC type output 0.5 mV internal impedance 5 ohms needle pressure 1.8 g to 2.2 g dead weight 10.7 g
The 1.5m conductor of the power cable is coated with high-purity silver on Higher-OFC, and the plug is rhodium plated. The center of gravity changes to a thicker sound quality with a lower center of gravity (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
*Needle cover missing. Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has small scratches, dullness, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.17 sound output confirmed
Accessories: none
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
※1 bottle only. The RCA cable uses a 0.6 m 6N-7N hybrid conductor and twin core structure. The cable is thick and powerful in the mid-range, making it a great cable for vintage audio. There is slight dullness on the plug part (Murakoshi Yoichi)
Maintenance information: 2023.7.20 Continuity confirmed
Accessories: none
The price has been reduced. 2024/2/2 sales price 2,500 yen. ※Inexpensive because 1 bottle is out of stock. Orthophone speaker terminal joint cable Be sure to improve the sound quality of speakers compatible with bi-wiring with 7N ultra-high purity copper wire. One vinyl cover is short (Takasaki Atsushi)
Accessories: original box
Main specifications: 7N copper (diameter 1mm) +gold plating treatment approx. 150mm/book
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Phono cable 1.2m L-shaped plug to RCA plug self-made phono cable using OYAIDE 102 SSC. The previous owner used it on the FR/FR-54. Details unknown (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
※ There is no problem with operation, but since it is cheap, it is currently sold. Panasonic CD player. A CD player that uses a MASH 1-bit DAC and a unique swing arm mechanism. It's a natural sound with no quirks, so you can enjoy it in a wide range of genres. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: frequency characteristics 2 Hz to 20 kHz W430 × H130 × D333 mm 5.2 kg