※It is inexpensive because there are many abrasions, stains, etc., and there is a feeling of use. A classic disc stabilizer. Moderate weight gives a sense of stability to record playback (Kobayashi Hitoshi)
Accessories: none
The price has been drastically reduced. 2024/2/26 sales price 1,200 yen. Recommended for player users who are not compatible with 8cm CDs. It is an adapter that can be held securely. *Cannot be used for recording media such as 8cmCD-R and 8cm DVDs (Kobayashi Hitoshi)
Accessories: none
S terminal cable 1.3 m wire/PCCC+Hi-OFC hybrid conductor titanium compound+rheostoma sheath There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Exterior, dullness, missing rubber feet, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/2 sales price 2,000 yen. ※Hand over as is. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Tape is wrapped around the base of the AC adapter cord and a sticker is attached (Murakoshi Yoichi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, instruction manual, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/7/5 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. There is a feeling of use (Hiura Katsuji)
Maintenance information: 2023.7.5 sound output confirmed
Accessories: AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The optical digital cable uses a 0.7 m high-reliability metal ferrule plug and APF (all plastic fiber). How about an introduction to optical connections? The exterior is dull and has a feeling of use. (MURAKOSHI Yoichi)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
2.0m optical cable DVD LINK series optical cable Highly efficient transmission has been achieved through round processing of terminals (Murakoshi Yoichi)
Maintenance information: 2024.5.10 continuity confirmed
Accessories: none
※There is no compatible device and it has not been checked. Audio-Technica D terminal video cable 1.3 m. There is an appearance, rubbing, and feeling of use (Kobayashi Hitoshi)
Maintenance information: Confirmation unconfirmed
Accessories: none
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: needle cover, original box
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
*Currently sold. DENON's MC type cartridge boost transformer. Since it is equipped with a pass circuit, it is convenient when listening by exchanging 2 types of cartridges (MM type, MC type) with a single arm. Also, since it uses a transformer designed for the DL-103 and DL-103S, it fully demonstrates the capabilities of the models described above. You can see the exterior, dullness, rust, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 1:10 frequency band 20 to 40 kHz dimensions W51 x H53 x D181 mm weight 0.65 kg
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
The price has been drastically reduced. 2024/6/2 sales price 278,000 yen Maintained! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (power amplifier direct, etc.) switch disassembly polishing grease application (loudness, subsonic, muting, processor, reckout, MM/MC switch, input selector, source direct, tape), output relay replacement, power amplifier section, power supply transistor, adjustment volume replacement, solder repair, volume, switch cleaning, DC, bias adjustment , running test)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
The disposal price has been reduced. Member discounts are not applicable. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
Maintained! This is a regular imported model from Yamagiwa. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays vintage speakers particularly well (Murakoshi Yoichi)
Maintenance information: 2024.5.28 maintenance (each SW/VOL cleaning, pin jack cleaning, lamp replacement, operation check)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
The price has been drastically reduced. 2024/6/3 sales price 248,000 yen with wood cabinet. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays particularly well with vintage speakers. As for the exterior, small scratches are scattered on the cabinet (Kanai Hidetsugu)
Maintenance information: 2024.3.16 maintained (each SW/VOL cleaning, pin jack cleaning, lamp deterioration replacement, bridge diode deterioration replacement, auto onboard capacitor deterioration replacement, direct connector soldering, pattern re-soldering, operation check (not completely removed)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi)
Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish)
Accessories: none
Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
A dust cover of the same size as the C-91 compatible with MICRO's BL-91, BL-99V, and SX-111FV. It is a sturdy construction with a thickness of 4 mm. There is an abrasion on the front (Murakoshi Yoichi)
Accessories: none
Main specifications: W523 x H100 x D410 mm
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
Disposal prices have been reduced. The 2020/2/10 sales price is 3,000 yen. ※It is inexpensive because it is in poor condition. Ceiling hanging bracket for the company's speaker 301 MM/2. It can be adjusted up and down by ± 90 degrees, and can be rotated 360 degrees horizontally. The feeling of use, rust, dullness over time, and stains are severe, and there are places with rust. (WATANABE Tadashi)
Accessories: none
Main specifications: W248 x D150 x H195 mm 1.4 kg/piece
Disposal prices have been reduced. Member discounts are not applicable. 2022/7/10 sales price 4,000 yen. BOSE 301MM Ceiling Mount Bracket I checked the installation, but the specifications seem to be slightly different from the original (Murakoshi Yoichi)
Accessories: mounting screws
Main specifications: Mounting bracket, inner size, 234 x 150 mm, mounting screw position (diagonal), 80 x 80 mm, external dimensions 243 x 350 x 150 mm, 1.35 mm
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
The disposal price has been reduced. Member discounts are not applicable. 2023/8/26 sales price 5,000 yen. Mini jack to mini jack cable 2.0m This is a power control connection cable that can simultaneously control the power on and off of Macintosh components and the on/off of meter lights. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2023.8.25 continuity confirmed
Accessories: none
※The remote control is out of stock, so it's cheap. Marantz CD player with excellent value for money. The smooth sound quality spans from mid to high frequencies, so you won't get tired of listening even when you listen for a long time. This is a bargain machine with a sense of SN that is more than the price. There is dullness and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual
Main specifications: CD player, CD-R/RW/MP3 file playback compatible, HDAM circuit adopted, size W440 x H89 x D317 mm, weight 5.7 kg
Unopened Replacement needle for Columbia/Denon cartridge, PU-1270, PU-1280, SPC-310 It is unchecked for replacement needle only. (Hitoshi Kobayashi)
Accessories: case
The price has been reduced. 2021/12/19 sales price 1,000 yen. ※There was a sound, but details such as characteristics have not been checked. Dynamic microphone made in China with standard specifications. How about an easy way to use it for a wide range of purposes other than vocals? Total body length 165 cm, 210 g (Murakoshi Yoichi)
Maintenance information: 2021.11.28 sound output confirmed
Accessories: none
Since the condition is poor, such as cracks in the body, it is currently being sold. A small full-range speaker that is compact, can be placed freely, and has a gentle impression. The sound quality is soft and the sound is relaxed. You can see a feeling of use such as cracks, dullness, and abrasions on the exterior and body (Kobayashi Hitoshi)
Maintenance Information:2023.6.5 Operation confirmed
Accessories: none
Main specifications: full range compact speaker 8ohm maximum input 40W W230 x H150 x D163 mm 1.6 kg
Mini plug cable 1.5m stereo mini plug to stereo mini plug Stable high sound quality can be ensured with a high purity 99.996% OFC oxygen-free copper cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: original box
The 1.5m pair of speaker cables are connected with crimp terminals, and the Cobra Silver Line is a wide, thick type. Silver wire coating There is strong dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
Speaker stand for the company's S-55twin. It is a size that is useful for other small and medium speakers. In addition to the exterior and veneer peeling on the side of the bottom, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W310 x H498 x D350 mm weight 5.8 kg
Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2024.6.7 sound output confirmed
2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, slip stud installation, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/application of dumping agent, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removes aluminum seals that do not require unit detachment Treatment to prevent idling, re-fix the unfixed coils inside the treatment with silicon ATT contact cleaning. An exchange frequency characteristic measurement check (~ 42 kHz) is performed because the wiring is broken at the base of the resistor, and the original capacitor is continuously used to confirm the input/output waveform and balance for good results, check the sound output)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
※Only 1 speaker cable 1.3 m terminal is a popular sold out speaker cable for the CARDAS entry series, unprocessed (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
The price has been reduced. 2024/6/4 sales price 29,800 yen ※The power supply has been converted to Megane Inlet. Maintained! Head amplifier for Luxman MC cartridges. This head amplifier has no corners and is characterized by a smooth, sit-down sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (GAIN switch disassembly contact polishing, contact grease application after eyelet correction. Transistor replacement for each circuit (DC amplifier, MUTING, power supply). (Running test)
Accessories: power cable
Main specifications: MC type cartridge head amplifier with PASS input impedance/100Ω 20dB/30dB switching W138 x H78 x D305 mm 2.7 kg