※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
Inexpensive because it is in poor condition. 38cm enclosure. Originally, the ALTEC 604-8G was included. There are many scratches, cracks and peeling on the decorative plate, and there is screw licking*Shipping is estimated separately (Oikawa Tetsuji)
Main specifications: W660 x H1005 x D465 mm 35.1 kg
※Shipping service. Like the previous issue, a number of attractive vintage speaker products will be explained with many beautiful photographs and enclosure drawings, etc. A must-have audio file, truly a “complete save edition”! Issued on /2010.11.29. Since the photograph is a sample, the actual product may be broken or there may be markings etc.
Prices have been reduced. 2022/11/25 sales price 100,000 yen The enclosure for TA-4151A has a thickness of 40 mm and a front baffle plate thickness of 36 mm, making it heavyweight and very sturdy. The baffle opening is φ296 mm, the unit fasteners are made of wood, and the locking screws for the baffle plate are missing. The exterior has peeling veneer and stains. (TAKIMOTO Yutaka)
Accessories: None*Baffle plate locking screw missing
Main specifications: W878 x H778 x D680 mm 101 kg (actual measurement)
*The woofer edge is deformed, the center cap is dented, there is an ATT crack, and there are footprints on the top plate, etc., so it is inexpensive and is sold as is. A floor-type speaker with a porous metal cone that realizes all-metal in the entire band. From the unit to the enclosure, this is a masterpiece that incorporates technology and cost as if Otto's intention were shown. The rich, natural sound is attractive. The enclosure also has scratches, chipped corners, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers 8Ω 93dB W450 × H910 × D430 mm 51 kg
※Shipping service. No. 87 Special Feature = Speakers from Around the World Listen to Their New Appeals/Total Test of 65 Representative Models/Exploring Know-how for Making Speaker Enclosures/Published on 1988.7.15. The photo is a sample, so the actual item may be broken, have marks, etc.
The price has been drastically reduced! 2022/5/1 selling price 79,800 yen It is a masterpiece 505J of domestic enclosure. With enough contents and box noise, it is a highly recommended box for those who use JBL. The excellent design unique to vintage is also attractive as an interior. The appearance has damage such as corner chips and abrasions. * The hakama has been removed, and there are no conversion baffles or mechanical plates. (Satoshi Yonejima)
Accessories: lattice net
Main specifications: W475 × H705 × D395 mm approx. 23 kg/book (actual measurement)
The price has been reduced. 2024/5/30 sales price 128,000 yen*It is cheap because it is in poor condition such as being scratched or the saran net peeling. It is tightly packed with a strong sealed enclosure and a high-quality unit, and the sound is moist and calm. If you drive with an amplifier with a strong drive, you can enjoy the dense mid and low frequencies. The exterior has scratches, scratches, and creases. Serial 02093/02092 (Murakoshi Yoichi)
Maintenance information: 2024.5.29 sound output confirmed
Accessories: saran net
Main specifications: impedance 8Ω output sound pressure level 85dB W220 × H390 × D255 mm 15 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
An enclosure for Yamaha's SR speaker and S1520S incorporating the YST system. The opening for the 38cm woofer+horn is empty. The speaker terminal is 1 Speakon terminal. There is a feeling of commercial use (Murakoshi Yoichi)
Accessories: none
Main specifications: bass reflex floor type W540 x H780 x D438 mm 25 kg (actual measurement)
Internal and external maintenance has been applied and brushed up! JBL 40th anniversary model! A reprint model of the L101. You can enjoy the excellent sound unique to horn drivers. It has a good response and is a spacious speaker that can be matched with music of a wide range of ages. The traditional lattice net design is also attractive. There is slight discoloration on the marble (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/polishing/oil finish
Front and rear baffles/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. Woofer edge replacement. Driver maintenance (magnetic circuit gap cleaning center adjustment). Network maintenance (frequency characteristic check, ATT cleaning).)
Accessories: lattice
Main specifications: 2 way · 2 speakers · bass reflex system · floor type frequency characteristics 35 Hz to 16,000 Hz directional characteristics (horizontal x vertical) 90 degrees x 40 degrees sound pressure level 92 dB 8 Ω allowable input 150 W crossover frequency 900 Hz enclosure volume 53.5 L W445 x H629 x D320 mm 29.1 kg/book
Tannoy rectangular yoke type enclosure by Shinkosha, a popular domestic box manufacturer. It is attractive because it is made to sound good. A 30cm unit adapter (detachable) is attached to the baffle surface, and casters are attached to the bottom (Murakoshi Yoichi)
Accessories: none
Main specifications: W597 x H108 x D37 mm weight 30 kg
Maintained! The culmination of Paragon, late model D44000WXA. The design created by Arnold Wolff is of course undisputed, but Paragon is wonderfully well thought out when it comes to sound quality, and it transcends the line for audiophiles. The combination of the reverberation of each unit and the late enclosure is the final form Paragon aims for. The beautiful way of making a plump, floating sound is unique (Yamato Yuki)
Maintenance information: 2024.5.31 maintained (exterior cleaning/repair/gloss adjustment, horn paint black paint woofer back grill repair driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement) ATT cleaning unit detachable)
Accessories: none
Main specifications: D44000WXA low range 38cm cone type LE15H+ medium range horn type 376+H5038p+ high range horn type tweeter 075 network LX5+N7000 crossover 500Hz/7000 Hz impedance 8Ω output sound pressure level 96dB allowable input 125W size W2640 x H902 x D740 mm weight approx. 300 kg
An Onken (Onken) style 38cm enclosure with an impressive bass reflex lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. Originally, the ALTEC 515B is mounted, and it is an enclosure that I want to assemble with a horn system to make it sound firmly. There is quite a feeling of use such as dirt, etc., and some broken screws. (Takasaki Atsushi)
Main specifications: W800 × H1023 (including casters) × D500mm Mounting hole diameter 345mm Screw pitch (diagonal) 372mm Width between splints on the back of the front baffle 410mm (actual measurement) 79.6 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/16 sales price 498,000 yen Maintained! New Recutural York with HPD385 in the original box. All refreshed after network capacitor replacement, unit overhaul, and enclosure maintenance! The sound of the box is very rich. The piano overtones are pleasant! The golden cheek finish, which is typical of Tannoy's vintage, is reminiscent of an English sound. The balance between the 15-inch unit and enclosure volume is excellent, and there is no dubbing, yet it draws in a way that is scaled. The exterior has been beautifully finished due to maintenance
(ASAINE Tomonori)
Maintenance information: 2024.5.16 Maintained (exterior repair/polishing/clear finish, saran net cleaning/repasting, ATT frame plate painting
Unit maintenance (low frequency edge replacement, magnetic circuit rust removal/horn coating/gap cleaning/center adjustment, fastener polishing, high frequency side magnetic circuit rust removal/gap cleaning/center adjustment) Unit detachment network maintenance: frequency characteristic check, ATT cleaning, terminal/4 pin terminal cleaning)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
※Shipping service. Special Feature = Internal and External Tweeter Research/Modern Noise Thoughts Vol.3/SR Speaker Research/New BLT Amplifiers/Sound Field Correction Using Partitions/Driver Tube Research/Frontier Technology “VHD Technology” /Published Circuit Diagram: ElectroVoice TL505 Enclosure/Mixing Console and Noise///S59.10.1 published. The photograph is a sample, so the actual product may be broken, written, etc.
※Shipping service. Special Feature: Modern Noise Consideration/Tuning the F Special of the Hearing Position with Ingenuity of Reflectors and Sound Absorbers/Noise Expulsion/Noise Measurement and Noise Meter/Horn & Driver Research Vol 2/About X Balance Amplifiers/Player Motor Servo Amplifiers/W Woofer Research Vol3/Published Circuit Diagram: Electro Voice TL806 Enclosure, Electro Voice TL806Q Enclosure/S59.8.1 Published. The photograph is a sample, so the actual product may be broken, or there may be markings etc.
The price has been drastically reduced! 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)
※1 bottle only. This is a 10 cm full range unit from FOSTEX. It is a very popular model for those who make their own speakers. The sound quality is bright and has an impression of tension. Dull, there is a feeling of use (Sasaki Shota)
Maintenance information: 2023.8.11 sound output tested
Accessories: manual, original box
Main specifications: full range aperture 10 cm maximum input 15 W 8 ohms magnetic flux density 13000 gauss baffle aperture diameter 9 cm recommended enclosure volume 15 L
*One SP terminal is a replacement, so it is inexpensive. It hasn't arrived in a long time. This speaker system inherits the DS-205 design philosophy of making small-aperture woofers sound smoothly with a large capacity enclosure. You can enjoy the soft texture and loud sound. Serial 12502/12517 (Murakoshi Yoichi)
Maintenance information: 2024.5.30 maintenance (exterior cleaning/touch repair, 1 terminal replacement)
Accessories: jumper cable (external product)
Main specifications: 2-way bass reflex type 6.3 ohm 87 dB W360 x H925 x D290 mm 25 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: none
Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
Refreshment maintenance was carried out with attention to detail, such as all exterior painting and driver gap cleaning! You can experience a unique sound that makes you feel a hot breath in the dry sound. This time it's a combination of enclosure 828B, woofer 416-8B, driver 802-8D+511B, and network N501-8A. The outstanding vocal band and the sense of energy of the resonating horn are amazing. The exterior has been beautifully finished due to exterior repairs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/full painting, saran net replacement, horn painting and butyl tape removal work, new horn receiver creation. Woofer maintenance (viscoid adjustment, terminal/vis-cleaning) driver maintenance (magnetic circuit gap cleaning/center adjustment, diaphragm screw replacement/lead disconnection repair) network maintenance (frequency characteristic check, ATT cleaning, terminal/vis-cleaning, butyl tape removal work) unit detachment, new horn stay installation processing, new wiring)
Accessories: none
Main specifications: 2 way 2 speaker unit configuration 802-8D+511b・416-8b・N501-8A・828b Dimensions W760 × H1,375 × D610 mm Weight approx. 74.0 kg
Self-made enclosure. The woofer opening is about 340 mm in diameter, the horn opening above it is 450 mm x 266 mm, the upper opening is 260 mm x 134 mm, and the tweeter part is about 60 mm in diameter. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: plate thickness 25 mm W800 x H960 x D580 mm 54.1 kg (actual measurement)
The disposal price has been reduced! Member prices are not applicable. 2022/7/16 selling price 100,000 yen wooden 46cm double woofer type. Baffle opening diameter 425mm Screw pitch 490mm Baffle and enclosure plate thickness 24mm Duct opening diameter 108mm Both the front and back plates cannot be removed. There is a difference in discoloration on the left and right in appearance, and there are corner chips, digging scratches, and dirt stains. (Yutaka Takimoto)
Accessories: none
Main specifications: W1600 × H950 × D850 mm (actual measurement) The weight has not been measured, but it seems that it is 100 kg or more.
※It has been repainted and is inexpensive because it is in poor condition. JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: screws
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
4530BK made by Shinkosha. Since there are many chips and scratches throughout, it is inexpensive. The D130 was mounted. Woofer with MA15 fastener! Powerful bass reproduction far exceeding size is possible with the rear loading horn type enclosure (Sasaki Shota)
Accessories: MA15
Main specifications: screw pitch 420 mm hole diameter 360 mm plate thickness 40 mm front baffle plate thickness 22 mm W600 x H1250 x D600 mm 56.3 kg (all measured)
Unspecified 3-way enclosure It is a super bargain price with a considerable feeling of use. For experimentation or research, if you are a self-author with confidence in your arm, how about challenging it? (Yoichi Murakoshi)
Main Specifications: W648 x H967 × D457mm 36.8 Kg (Measurement) Woofer opening diameter 300 mm Scoker opening diameter 173mm tweeter opening diameter 102mm
An enclosure that seems to be for Sansui's old system component speakers. The lattice box with legs reminiscent of JBL's Baron and Bicount is really fashionable. The lattice on both the left and right is out of the frame. There are traces of internal remodeling (Fujisawa Koshi)
Accessories: None
Main specifications: opening diameter 212mm (screw pitch 240mm), aperture diameter 110mm (countertop 170mm, screw pitch 140mm), opening diameter 95mm (for bass reflex port/wood screw pitch 118mm), aperture diameter 70mm (Countertop 92mm, Screw Pitch 104mm) 14mm Particle Board, Veneer Finish W500 × H665 × D430mm 15kg
A backload type enclosure that can mount an unspecified JBL38cm woofer. The construction is solid. If you've been looking for one, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W603 x H1100 x D508 mm 40 kg (actual measurement)
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
A 38cm double configuration enclosure that can be used as a center woofer or center speaker. The previous owner had an electro voice 38cm woofer installed. Comes with casters. There is a lot of feeling of use, such as uneven paint and bolt marks on the top plate. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W1045 x H790 x D604 mm 52.2 kg
Self-made enclosure. The previous owner attached a JBL 38cm unit with a 1" driver and used it in 2 ways. It comes with casters. There is a lot of feeling of use, such as uneven paint. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W500×H790×D604mm 53.4 kg
※1 bottle only. Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
A rare JBL 46cm woofer has arrived! The thick sound that can only be produced with a 46cm woofer is attractive. Please try this large aperture unit that is compatible with digital recording and is advantageous for deep bass reproduction. The exterior has tape marks and magic marks on corn paper. Serial 181936/481666 (Sasaki Shota)
Maintenance information: 2024.5.4 sweep test good
Accessories: none
Main specifications: 46cm cone woofer unit impedance 8Ω 99dB frequency range 25Hz to 1.6kHz recommended enclosure volume 140 to 340 lit diameter 464 ✕ depth 212 mm weight 13.2 kg