Replacement needle compatible with National EPS-19ST Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Self-made enclosure. The woofer opening is about 340 mm in diameter, the horn opening above it is 450 mm x 266 mm, the upper opening is 260 mm x 134 mm, and the tweeter part is about 60 mm in diameter. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: plate thickness 25 mm W800 x H960 x D580 mm 54.1 kg (actual measurement)
The price has been reduced! 2023/10/7 This is a self-made MC step-up transformer with a sales price of 20,000 yen. According to the specifications, the boost ratio appears to be 1:10. Use it with high output cartridges such as the DL-103! (FUJISAWA KOSHI)
Maintenance information: 2023.10.7 operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W 110 x H45 x D145 mm (actual measurement)
TRIO N-39 compatible needle. This is a replacement needle for TRIO V-39. Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
*Lead wire missing. Popular wood headshell Asada cherry blossoms from Hokkaido are used as the material, and it is a hard, good-sounding material that is also used for speakers and headphone cases (Tamura Eiji)
Maintenance information: 2024.6.1 operation confirmed
Accessories: No accessories
Main specifications: Hokkaido Asada cherry heartwood self-weight 10.4 g
This is a replacement needle compatible with Hitachi MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle for Hitachi. Compatible with MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
Disposal prices have been reduced. Member discounts are not applicable. 2018/10/24 Sales price 3,000 yen These are parts made in Mexico whose details are unknown. There is rust, dirt, etc. (NAGAI Michio)
Maintenance Information: 2018.10.24 Conductivity Confirmed
Accessories: none
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The price has been drastically reduced. 2023.9.5 sales price 8,000 yen. Set of 8 unspecified JBL speaker mount parts MA15 type. There is a feeling of use on the exterior, paint peeling, etc. (Kobayashi Hitoshi)
Accessories: none
Genuine replacement needle for YAMAHA CG-6900 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
There is no problem with the operation, but it will be handed over as is. Yamaha subwoofer. You can easily enjoy powerful sound. The high-cut filter allows you to listen in the desired range, so the range of uses also expands. The exterior has a slightly raised part on the top plate, and there is a scratch on the back corner (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: A-YST method anti-magnetic amplifier output 250W playback frequency band 20Hz to 160Hz high-cut filter frequency 40Hz to 140Hz continuously variable W340 x H432 x D370 mm 17 kg
Speaker with active servo technology A powered speaker with a built-in power amplifier in the woofer (only the woofer part requires a power source to drive). The medium and high frequencies, which are typical of Yamaha, remain the same, and the low frequencies also come out well. It has a good balance and can be used regardless of genre (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual
Main specifications: 4 way, 3 speakers, bookshelf type, W340 x H700 x D337 mm, 30 kg/1
YAMAHA speaker stand The compact stand is made to feel stiff, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. There are line marks, threads, and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W270 x H494 x D350 mm top plate part W190 W x D175 mm 7 kg/unit
Genuine YAMAHA, genuine replacement needle for CG-8100 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi)
Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish)
Accessories: none
Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
Input transformer sold 1 piece primary: 10KΩ secondary: 60 kΩ boost ratio 1:2.5 W24 x H35 mm 0.06 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
A set of 2 seems to be a choke transformer, but the details are unknown. Measured DC resistance value 380/373Ω W31H95 x 44mm 0.31 kg/piece (actual measurement, not including protrusions), only conduction and resistance values have been confirmed by a tester (Kojima Yosuke)
Accessories: none
Input transparent sale primary: 10 KΩ secondary: 60 kΩ boost ratio 1:2.5 W 24 x H35 mm 60 g/piece (actual measurement, not including protrusions) with white box (Kojima Yosuke)
Accessories: white box
Special stand for SX-311GY Chic grey finish It is a model that can be used with various medium speakers. Dullness, small scratches, and abrasions due to aging are conspicuous on the exterior. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W330 x H440 x D294 mm top plate part W267 x D245 mm 5.3 kg
※Since there is no main unit, operation has not been checked. Nagaoka replacement needles. This is a TRIO N-39 compatible product. As for the exterior, the needle tip is slightly to the left (Hiroki Aso)
Maintenance information: 2024.4.7 operation unchecked
Accessories: none
Main specifications: Appropriate needle pressure 1.5g
Heater transformer spare sale primary: 105-115-125V secondary: 6.3V/5A (with CT) W49 × H69 × D45 mm 0.5 kg/piece (actual measurement, not including protrusions) with original box exterior, terminals It seems to be an unused item from the condition! (Kojima Yosuke)
Accessories: original box
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
Power supply/heater transformer primary: 100V secondary: 6.3V/4A, 7-6.3-5-5-6.3-7V/5A × 2 W130 × H150 × D130 mm 8.1 kg (actual measurement, not including protrusions) There are scratches in places (Yosuke Kojima)
Accessories: none
Power transformer primary: 100V secondary: 7.5-6.3-0-6.3-7.5V/3A (2 circuits) W90 × H121 × D90 mm approx. 3.6 kg (actual measurement, not including protrusions) There is a fine bruise (Kojima (Yosuke)
Accessories: none
Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.)
Accessories: EP adapter
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
Technics MM Cartridges It was adopted as an accessory to the company's record player. It has a neutral, deafening sound, and is compatible with various music genres (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.2 mV frequency range 20 to 25 kHz needle pressure 1.75 g dead weight 6 g
The price has been reduced! 2024/5/12 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 operation confirmed
Accessories: power cord, connection cord, EP adapter, subway, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
This is a replacement needle for the national cartridge EPC-05STA. Unopened and unchecked (Mizushima Itsuro)
Maintenance information: 2024.3.8 unchecked
Accessories: original box
The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: subway, copy of instruction manual, EP adapter
Main specifications: quartz lock direct drive, full manual, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine)
Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book