Maintained! The balance between the good sound typical of the 70s Accuphase and the high frequency with good extension of the FET amplifier is wonderful, and it makes you enjoy the dense sound that is hard to feel with modern amplifiers. The champagne gold and VU meter designs are also a model that shines visually. The exterior has seal marks around the power switch and back speaker terminals. There is overall dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.5.31 Maintained (FET, output relay, electrolytic capacitor, film capacitor, semi-fixed VR, lamp. Each was replaced due to defects and deterioration. Switch disassembly, polishing and cleaning. Card edge contact cleaning and solder correction. (Bias and offset adjustment output sound check, interior and exterior have been cleaned)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 130W+130W (8Ω) 180W+180W (4Ω) W445 × H160 × D70 mm 20 kg
Maintained! Second generation model of the famous P-300 series. The sharp, sharp, and exhilarating sound is alive and well. It also goes well with JBL, etc., and makes a powerful sound. You can enjoy rough sounds that cannot be experienced with current products. There are scratches and scratches on the exterior. Serial B8Y695 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 Maintained (output relays, film capacitors, electrolytic capacitors, semi-fixed VR, etc. replaced. Fixed due to fixed switch. ATT disassembly and cleaning. SP switch polishing cleaning. Solder correction. Card edge contact cleaning. Increase and tighten the output terminals. ※Bias and offset check adjustment. Output audio check. (*When using MAIN & REMOTE1 speakers, be sure to connect both speakers.)
Accessories: power cord
Main specifications: 150W+150W (8Ω) W445×H160×D355mm 25kg
Maintained by the manufacturer! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that allows you to hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. The exterior has dullness and small scratches, and there are noticeable abrasions on the left side. Serial A2X643 (Takahashi Nobuyuki)
Maintenance information: 2024.5.31 Maintained (capacitor replacement logo, lamp replacement, each switch, input/output terminal contact cleaning, DC offset voltage readjustment of each amplifier, internal and external cleaning functions, performance check, pressure resistance, safety check)
accessories:
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
It hasn't been in stock in a long time! Accuphase Premium Cartridges Using a sapphire tube cantilever, the sound is straightforward with no specific sound, almost no distortion, and a perfect sense of range. Now it's a manufacturer that pushes ahead with the cutting edge of digital audio, but it's a cartridge where you can once again feel the high level of analog audio technology (Yamato Yuki)
Maintenance information: 2024.5.31 operation confirmed
Accessories: The original box needle cover is missing
Main specifications: MC type output voltage 0.18 mV needle pressure 1.5 to 2.5 g optimal 2 g impedance 4 ohms line contact needle
The top model of the premain amplifier launched by AccuPhase to commemorate its 40th anniversary. Uses AAVA volume. The power amplifier section with pure Class A operation is designed to be resistant to changes in the surrounding environment. An overwhelming amount of information filled with a sense of silence and scale. It's the ultimate premain with a high degree of perfection. The exterior has a feeling of use such as dullness. Serial 16X713 (Jun Tamai)
Maintenance information: 2024.5.30 sound output confirmed
Accessories: remote control instruction manual power cord
Main specifications: 30W+30W (8Ω), 60W+60W (4Ω) frequency characteristics 20Hz to 20kHz input terminals/balance (XLR) x 2 systems, unbalance (RCA) x 5 systems. Up to 2 option boards can be added to the rear panel W465 x H191 x D428 mm 24.7 kg
This is the 3rd generation model of the 500 series with the familiar clean power supply. It secures and supplies clean power that is free from dirty electricity mixed into the home. Now in the 3rd generation, it is an excellent item where progress can be seen not only in the transparency of the mid to high range, but also in the sense of energy in the low range. As for the exterior, there are line marks on the back. Serial D2Y023 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: rated output capacity 510VA, rated output voltage AC100V±1V output outlet, 3P x 8 meters/input/output voltages, strain rate, etc. Switch between 6 types and display W465 x H181 x D386 mm 23.8 kg
It is a Schumann resonance wave (7.83 Hz) generator that increases the S/N ratio by canceling electromagnetic waves etc. generated from the entire audio equipment. To use it, power the included AC adapter from an electrical outlet and place the main unit as high as possible in the room (1 m 50 cm or more). There is no noticeable damage to the exterior (Tomonori Asae)
Main specifications: Schumann resonance wave (7.83 Hz) generator input voltage 12V W140 × D170 × H50 mm 220 g
From exterior painting to gap cleaning, it has been refreshed and maintained with attention to detail! This is a 612C monitor speaker with a refined masterpiece 612A system. The unit is an early model 604-8G. The thick, unsluggish tone centered around the middle range is perfect for vocals. Since localization is also precisely determined, it is a practical and easy-to-use speaker (Takasaki Atsushi)
Maintenance information: 2024.2.8 Maintained (exterior repair/polishing/full painting, network mounting hole processing, saran net replacement. Unit maintenance (gasket replacement, input terminal contact cleaning, high frequency side disconnection repair/magnetic circuit rust removal/gap cleaning/center adjustment) network maintenance (frequency characteristic check, panel float bonding, ATT disassembly cleaning, input terminal contact cleaning) terminal cleaning)
Accessories: saran net
Main specifications: coaxial 2-way speaker unit 38cm coaxial impedance 8Ω 104dB crossover frequency 1.5kHz W648 × H749 × D509 mm 54.5 kg
Refreshment maintenance was carried out with attention to detail, such as all exterior painting and driver gap cleaning! You can experience a unique sound that makes you feel a hot breath in the dry sound. This time it's a combination of enclosure 828B, woofer 416-8B, driver 802-8D+511B, and network N501-8A. The outstanding vocal band and the sense of energy of the resonating horn are amazing. The exterior has been beautifully finished due to exterior repairs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/full painting, saran net replacement, horn painting and butyl tape removal work, new horn receiver creation. Woofer maintenance (viscoid adjustment, terminal/vis-cleaning) driver maintenance (magnetic circuit gap cleaning/center adjustment, diaphragm screw replacement/lead disconnection repair) network maintenance (frequency characteristic check, ATT cleaning, terminal/vis-cleaning, butyl tape removal work) unit detachment, new horn stay installation processing, new wiring)
Accessories: none
Main specifications: 2 way 2 speaker unit configuration 802-8D+511b・416-8b・N501-8A・828b Dimensions W760 × H1,375 × D610 mm Weight approx. 74.0 kg
The price has been reduced. 2024/5/25 sales price 29,800 yen. ※There is slight distortion, but I don't mind playing music. Altec's 10cm full range unit is rarely in stock. An ALTEC unit with an orthodox design suitable for bass reflex. Please enjoy the speedy sound unique to ALTEC. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 operation confirmed (slight distortion, no problem with music playback)
Accessories: instruction manual, gasket
Main specifications: inch screw pitch, 120 mm, playback frequency characteristics, 130 to 14,000 Hz, efficiency: 94 dB, impedance: 7 ohms, weight: 0.8 kg
In addition to suppressing static electricity and electromagnetic noise by adopting a 0.7 m pair titanium compound sheath, the RCA cable is heat-resistant and can also be used for car audio. It's a bit addictive (Fujisawa Yukishi)
Maintenance information: 2024.5.31 continuity confirmed
Accessories: No accessories
The price has been reduced. 2024/5/23 sales price 22,800 yen. Set of 4 large insulators The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
Fine gold series with 2.0m pair of RCA cables made of 99.997% OFC material. This is an entry-class, easy-to-use cable. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 continuity confirmed
Accessories: none
※It is inexpensive because there are many stains. A classic shell made from machined aluminum blocks. I like the sturdy construction and simple design (Murakoshi Yoichi)
Maintenance information: 2024.5.21 continuity confirmed
Accessories: none
Main specifications: machined aluminum block body weight 13g
This is Belldream Cartridge Keeper BD-CK2A. It comes with a headshell and can hold 2 cartridges. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W90 ✕ H120 ✕ D90mm 160g
*Currently sold. A small speaker with a 16.5 cm woofer. This is a high cost performance speaker that allows you to listen to rich musical sounds that are beyond its size. The full expressive power of the mid-range is attractive. The exterior is good with no conspicuous scratches. Serial 37866 (Yonejima Satoshi)
Maintenance information: 2024.5.30 good sweep test
Accessories: saran net
Main specifications: 2 way impedance 8 ohms efficiency 90 dB playback frequency band 43 to 21,000 Hz W227 x H360 x D230 mm 7 kg
Sold 1 bottle ECC82/12AU7 compatible ball, military tube, made in England, measured value 100 (rejected value 56) with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Sold 1 bottle ECC82/12AU7 compatible ball, military tube, made in England, measured value 98 (rejected value 56) with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
The pair tube is thought to be made by TESLA due to its 6CA7 compatible ball brown base double ring getter structure. Measured value 50/48 (rejected value 30) There is a getter burn with a white box*The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
※The color may fade due to sunburn on the side, so it is inexpensive. A classic bookshelf speaker with a small yet firm sense of volume and texture that makes a good impression. It reproduces music without choosing a genre. There is a feeling of use on the exterior due to sunburn, small scratches, etc. (Tamai Jun)
Maintenance information: 2024.5.31 sound output confirmed
Accessories: saran net jumper plate
Main specifications: Playback frequency band 45Hz to 50kHz 8Ω W165 × H280 × D260 mm 6.7 kg/1
The price has been reduced! 2024/5/28 sales price 39,800 yen Genuine stand for the B&W805 series. It enhances the sound quality of the speaker and has an appeal unique to genuine products. The exterior has a feeling of use such as dullness and small scratches (Jun Tamai)
Accessories: instruction manual, mounting screw, spike holder (general purpose)
The price has been drastically reduced! 2024/5/27 sales price 398,000 yen A popular model equipped with a diamond tweeter that rewrote the history of the 800 series. The color is rose. The excellent stretch that penetrates the high range without habit and the sense of volume in the mid to low range, which has a strong presence, are appealing not found in the current D3. The exterior has dullness, small scratches, and stickiness on the bass reflex. Serial 0012701 0012702 (Asaine Tomoho)
Maintenance information: 2024.5.27 sound output confirmed
Accessories: saran net jumper cable
Main specifications: 2 way 2 speakers bass reflex diamond dome tweeter 8 ohm crossover 4 kHz frequency characteristics 42 to 33 kHz W238 x H418 x D351 mm 12 kg
The price has been drastically reduced! 2024/5/25 sales price 1,180,000 yen This is a popular piano black model. I am overwhelmed by the range and depth. The piano trio is a versatile player who swings lightly and sounds softly with a delicate vocal system. The 800 series boasts such high performance that many audio manufacturers use as a standard for determining sound. The exterior is good with no conspicuous scratches. Serial 1605 0003931 FP37486/1605 0003932 FP37496 (Yonejima Satoshi)
Maintenance information: 2024.5.25 sweep check OK
Accessories: instruction manual, spike, rubber foot, cloth, jumper cable
Main specifications: 25 mm diameter tweeter x 1 130 mm diameter mid x 1 165 mm diameter woofer x 2 frequency band 20 Hz to 35 kHz efficiency 89 dB impedance 8 ohms W238 x H1,019 x 345 mm 33 kg/1
The price has been drastically reduced! 2024/5/28 sales price 178,000 yen This is the 683S2, the top model in B&W's new 600 series. The floating-mounted tweeter greatly contributes to vocal sound images that clearly emerge. The medium to high range quality, which has been further upgraded from the past, is attractive. There are scuffs and stains on the sides and edges. The spikes are out of stock. Serial 1404-0012333, 1404-0012334 (Fujisawa Yukishi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: saran net, rubber feet, jumper plates
Main specifications: 3-way 4-speaker floor-type playback frequency range 30Hz to 50kHz efficiency 89dB impedance 8Ω W320 ✕ H1,020 ✕ D370 mm 27.2 kg
Dayton Audio's small power amplifier. Designed to be just the right size for a desktop, this is one that can be loud enough for a small speaker. It also has a headphone jack, so it can also be used as a headphone amplifier. The exterior is dull. Serial V200004300 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: AC adapter
Main specifications: 60W+60W (4Ω) W117 x H44 x D79 mm dead weight 1.23 kg
The disposal price has been reduced! Member prices are not applicable. 2024/5/17 sales price 99,800 yen ※The HDD has been changed to an SSD (2TB). This is a black model that has upgraded the DELA N1A/N1Z, which was announced and sold as the industry's first “audio NAS,” and improved commerciality. Equipped with a dedicated USB-DAC connection terminal, the rear design has been renewed. In addition to being equipped with a 60W high-capacity power supply unit, a newly developed high-capacity capacitor bank is mounted on the rear stage of the power supply unit. A newly selected 3.5-inch quiet drive is mounted on a floating silicon bush to improve sound quality. There are scuff marks and dirt marks on the exterior. Serial 40300161000139 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: power cord
Main specifications: storage capacity 2TB (2TB SSD x 1) input/output terminal USB 3.0 x 3 (import/capacity expansion/backup) USB 2.0 x 1 (for USB-DAC connection) RJ45 x 2 (router connection/network player) compatible file format WAV · AIFF · FLAC · ALAC · DSF · DFF sample frequency 44.1/88.2/176.4/352.8/48/96/192/384 kHz (PCM) 2.8 /5.6/11.3 MHz (DSD) compatible bits 16 to 32 bits (PCM) W436 x H70 x D352 mm weight 7 kg
Denon's current CD player. Made in 2023 It is equipped with AL32 Processing Plus, which upsamples 44.1 kHz/16 bit data to 705.6 kHz/32 bit during CD playback and performs bit expansion processing. It comes with a front USB input that supports DSD high-resolution file playback. It is in good condition with no noticeable scratches. Serial DBTG082303357 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: remote control, instruction manual, power cord, RCA cable, original box
Main specifications: output RCA, digital coaxial, 1 optical system each W434 x H107 x D328 mm 4.9 kg
The price has been reduced! 2024/5/16 The CD mechanism has been replaced with Denon at a sales price of 35,000 yen! Denon design series CD player. It is equipped with an inexpensive yet highly accurate D/A converter that is compatible with MP3 and WMA files. Since it can also be used vertically, it is attractive that it is easy to adjust where it is placed. The exterior is dull and has small scratches. Serial ADR 27190603014 (Tamura Eiji)
Maintenance information: 2024.5.16 manufacturer maintained
Accessories: remote control, power cable
Main specifications: analog output x 1, coaxial digital output x 1 size W200 x H86 x D 240 mm, weight 2.4 kg
The price has been reduced! 2024/5/28 sales price 79,800 yen Maintained by the manufacturer in 2024/4! DENON's pre-main amplifier. It is a mid-size model, and a staple machine with excellent stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There is a feeling of wear on the exterior, such as scratches and dullness. Serial 8061507480 (Jun Tamai)
Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.)
Accessories: instruction manual, power cable, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
The price has been drastically reduced. 2024/5/5 sales price 22,000 yen. ※Since there is a lot of deterioration in the exterior, it is inexpensive. A popular DIATONE bookshelf. Metallic sounds such as wind instruments and hi-hats on drums resonate comfortably in the crisp high range, and the low frequencies are more powerful than their size. In addition to the exterior, there are many peeling veneers, and a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2-way speaker, bookshelf type, bass reflex, efficiency 89dB, impedance, 6Ω, size, W212 x H349 x D220 mm, weight 7 kg
*One SP terminal is a replacement, so it is inexpensive. It hasn't arrived in a long time. This speaker system inherits the DS-205 design philosophy of making small-aperture woofers sound smoothly with a large capacity enclosure. You can enjoy the soft texture and loud sound. Serial 12502/12517 (Murakoshi Yoichi)
Maintenance information: 2024.5.30 maintenance (exterior cleaning/touch repair, 1 terminal replacement)
Accessories: jumper cable (external product)
Main specifications: 2-way bass reflex type 6.3 ohm 87 dB W360 x H925 x D290 mm 25 kg
Interior and exterior refreshment maintenance has been completed and brushed up! A consumer model of the 2S-305, a timeless monitor speaker masterpiece that Japan is proud of. The thick and clear midrange and detailed high frequencies, which cannot be felt with the look, vividly reproduce vocals. The sound that accurately expresses the characteristics of an amplifier that is set regardless of whether it is a vacuum tube or transistor makes me feel the goodness of the device I have on hand that I haven't been able to see until now. The exterior is in perfect condition due to maintenance. Serial 351364 4851370 (Yamato Yuki)
Maintenance information: 2023.12.1 Maintained (exterior polishing, oil finish, exterior repair, front and rear baffle painting to create missing parts, saran net replacement, velcro replacement. Woofer maintenance center adjustment, edge damping agent application, disconnection solder treatment, center cap dent correction. Tweeter maintenance center cap internal cleaning and replacement, center adjustment, corn paper edge crack repair, edge damping agent application, unit detachment. Network maintenance frequency characteristics check, ATT contact cleaning, terminal cleaning sound operation confirmed)
Accessories: saran net
Main specifications: 2 way bass reflex system input impedance 8 ohms output sound thickness level 96 dB crossover frequency 1500 Hz W650 × H880 × D445 mm weight 50 kg
Maintained. DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. You can see a feeling of use on the exterior, dullness, rust, scratches, etc. (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (board peeling and re-soldering treatment, block capacitor 30/20/20 μF replacement, film capacitor 0.047 μF → 0.1 μF original, electrolytic capacitor 50 μF, resistance 1W → 1/2 W original replacement, BIAS readjustment/RCA jack and vacuum tube socket caulking repair. Operation check) 2016.2.27 Maintained (AC cord, cord stopper, input terminal, capacitor (47uF100V) resistor (47k, 270k, 470k, 1M) 1/2 w, replacement of 2 vacuum tubes (6550), bias adjustment)
Accessories: copy of instruction manual
Main specifications: tubular mono power amplifier using vacuum tube KT88/5AR4/6AN8A output 60W/140W W229 × H190 × D229 mm 11.5 kg
Pair tube direct heat triode tube, white base, made in Russia, measured value 84/76, rejected value 58) with replacement box ※Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/24 sales price 29,800 yen ※1 wooden horn is compatible not only with FOSTEX drivers, but also with JBL 1-inch drivers (stop 3 points). It is a horn characterized by a broad sound unique to wood horns, which is different from metal horns (Takahashi Nobuyuki)
Main specifications: cutoff frequency 420 Hz throat 2.54 cm birch wood parallel plywood W444 × H90 × D293 mm 3.1 kg (actual measurement)
The price has been drastically reduced! 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)
Speaker cable 3.0 m/4.3 m pair end end uses a μ-conductor with unique processing applied to the PC-OCC conductor for the purpose of reproducing sound with good sharpness, and it is a cable with excellent cost performance that also achieves delicate high-frequency reproduction (Fujisawa Yukishi)
Maintenance information: 2024.5.31 continuity confirmed
Accessories: No accessories
Pair tube Russian reprint model lot: 1903/1903 measured value 52/50 (rejected value 44) side getters with original box have been reduced ※Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Pair tube Russian reprint model lot: 1903/1902 measured value 54/48 (rejected value 44) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This one is not compatible with spikes. The exterior has dullness and scratches. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This is a spike specification. There are wrinkles on the exterior like wrap marks. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
A classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. Large finger mount You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 6.8 g
Hamilex compact 4-tier rack. The design is simple and you won't get tired of it. The shelves can also be adjusted, making it easy to use. The screw holder on the reinforcing column rotates idle and the screw cannot be stopped completely. There are blows and scratches on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Top plate load capacity: 100 kg or less Shelf board load capacity 50 kg or less Bottom plate load capacity 100 kg or less Total load capacity 250 kg W591 x H600 x D550 mm Weight 31.5 kg