Balance cable 1.0 m pair XLR cable using a huge network that is synonymous with MIT. The fact that the transparency is clearly increased is a word. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Maple type. Stand for small speakers made of solid Yonematsu. Compatible with most small speakers. The combination of Corian base and wood block material makes it resonate aggressively and accentuates the sense of spaciousness and depth. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 6 spacers
Main specifications: W280 x H615 x D370 mm 6.6 kg
*The stylus is a SHURE VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Tomonori Asae)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
USB cable, 1.5m, USB Type-A & Type-B connector, this is an advanced Caldas cable with precise, high resolution, and a sense of dynamism. Comes with a quality assurance certificate (home state/authorized dealer) (Kojima Yosuke)
Accessories: Quality Assurance Certificate (Home Country/Authorized Distributor). Motobukuro
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
The price has been reduced. 2024/5/24 sales price 35,000 yen Tannoy rectangular yoke type enclosure by Shinkosha, a popular manufacturer of domestic boxes. It is attractive because it is made to sound good. A 30cm unit adapter (detachable) is attached to the baffle surface, and casters are attached to the bottom (Murakoshi Yoichi)
Accessories: none
Main specifications: W597 x H108 x D37 mm weight 30 kg
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.10 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Comes with a dedicated stand LS-500! Spirit is one of the most popular in the SX-500 series. Like Victor, who continues to preserve the natural sound, it makes acoustic instruments and vocals sound lustrous. There is a feeling of use on the exterior such as scratches and fading (Tamai Jun)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: dedicated stand jumper cable
Main specifications: Sealed bookshelf type Alnico unit, body size dimensions W270 x H455 x D255 mm, 12.5 kg, stand size W294 x H440 x D330 mm, stand weight 6 kg
Harmonic resolution stabilizer. By placing an analog disc on the turntable shaft, resonance of the LP record itself, vibration due to air propagation, and noise caused by vibration of the record player itself are suppressed. The synergy effect with the isolation bass is remarkable, and you can expect rich sound quality and consistent low-level performances (Tamai Jun)
Accessories: original box instruction manual
Main specifications: size φ82.5 mm x H34.3 mm weight 315 g
PSE certified product. This product combines Eau Rouge's CFRP technology with a lightweight, highly textured acrylic box. Although it is the company's entry model, it is a product with a firm focus on sound quality. There are a few small scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: W300×H80×D65mm
Maintained in December 2019! An amplifier with excellent cost performance. It sounds great with a well-contoured sound at an affordable price. It is one that makes you feel particular about functionality, such as having a pre-out terminal and being compatible with bi-amplifiers. The exterior has scuffs on the sides. Serial 7117300736 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
2019.12.8 Maintained (main board soldered, adjustment relay replaced)
Accessories: Remote control instruction manual copy power cable
Main specifications: rated output 70W+70W (8Ω) 140W+140W (4Ω) playback frequency band 5Hz to 100kHz dimensions W434 x H134 x D407 mm weight 14.6 kg
Equipped with an impedance changeover switch (LOW: 5 to 50 KΩ, MID: 40 to 100 KΩ, HIGH: 90 KΩ or more) that optimizes characteristics according to the input impedance of devices connected to a 1.0 m pair of RCA cables, a Valerie structure with all phase characteristics, and a high C/P model that employs many MIT patented technologies such as CVT couplers. (FUJISAWA KOSHI)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original box
Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi)
Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish)
Accessories: none
Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
XLR decimal cable 1.5m Glen optimized 4N silver wire+polymer coating A rare digital cable. GOLD ECLIPSE has a reputation for its thickness, smooth texture, and good tone. The bright texture with high musicality is attractive enough. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
Comes with original box! A Fostex subwoofer that was born as a superior model of the CW200A. It makes me feel that the potential is high not only for surround sound, but also for audio. The bass has a core and clear contours, and it firmly supports the foundation. The exterior has small scratches and dullness, and there is a feeling of use such as sunburn on the speaker terminals. Serial 1000852 (Tomoho Asaine)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: instruction manual, saran net power cable, original box
Main specifications: subwoofer with built-in amplifier, 300W, sealed acoustic suspension, simple anti-magnetic type, 4Ω, 90dB, W340 x H360 x D400 mm, 18 kg
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Accessories: none
Main specifications: W600 x H1200 x D230 mm 16.5 kg
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Main specifications: W600 x H1200 x D230 mm 16.5 kg
※ Sub weight is missing. Dust cover hingeless design 5th generation of the SL-1200 series. This is a high-grade model manufactured to commemorate the 30th anniversary. Its accuracy and durability are outstanding among many players, and it features clear sound with clear outlines. There is dullness, small scratches, and threads on the dust cover (Daiki Goto)
Maintenance information: 2024.6.11 operation confirmed
Accessories: dust cover, EP adapter
Main specifications: manual quartz direct drive 33/45 rotation universal S-shaped tone arm static balance type needle pressure adjustment range 0 to 4 g W453 x H162 x D353 mm 11.7 kg
RCA → XLR cable (No. 2 HOT) 1.0m pair, new-generation minimum value guarantee, stress-free 7N copper conductor & polyolefin sheath, model with fine texture, sharp, and very careful sound. Recommended for those who want to listen closely to classical music. There is dullness on the terminals. (YONEJIMA Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (protector circuit capacitor replacement, output relay replacement, phono and pin jack polishing, input selector, etc., switch disassembly polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor switch), each volume, switch cleaning, internal inspection and cleaning, adjustment inspection, operation confirmation, running test)
Accessories: instruction manual (copy)
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
Maintained by the manufacturer. The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There are abrasions on the exterior and volume, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (1 PSW rework, 12V relay, function SW replacement. (Amplifier board inspection, solder correction, operation confirmation test)
Accessories: instruction manual, power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible W434 x H180 x D478 mm 22 kg
The price has been reduced! 2024/6/4 sales price 67,800 yen ※The remote control is out of stock, so it's cheap. Maintained! CD turntable player. The 1-bit DAC “High Speed Pulse Flow D/A Converter” developed in-house was adopted, and I have the impression that it is more detailed and smoother than the PD-T07 one generation ago. There is a feeling of use on the exterior, such as dullness and old scratches. Serial LK1004122 AS (Hiroki Aso)
Maintenance information: 2024.6.4 Maintained (after cleaning the focus lens, check the mechanical electrical system adjustment of the fixed servo mechanism part with a dedicated adhesive RF playback level of 1.5 Vp-p)
Accessories: none
Main Specifications: Turntable CD Player Dimensions W440 x H140 x D365 mm Weight 12 kg
The price has been reduced! 2024/6/2 sales price 79,800 yen Special arm base for attaching the GLANTZ tonearm MH-1200S to the LUXMAN record player PD-191A. Attach it to the back left side of the PD-191A main unit. The exterior is generally good (Takahashi Nobuyuki)
Accessories: mounting screws
Main specifications: Material stainless steel W128 x H15 x D128 mm 787 g (actual measurement)
*Currently sold. Aiwa's DSD DAC. A/D converter and D/A converter set. It is possible to reproduce DSD 1-bit 64fs signals in SACD format. Even with analog input from compressed sound sources such as MP3s, the sense of localization, sound field, and luster of sound are improved. Serial D101211111 WD01210911 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
Accessories: power adapter, HMDI connection cable, instruction manual
Main specifications: AX-D1: DSD1 bit/64 fs playback frequency band 20 Hz to 100 kHz (+0/-3 dB) dynamic range 102 dB or more, SNR ratio 102 dB or more at 1 kHz, 107 dB or more at 20 kHz channel separation 100 dB or more size W250 x D170 x H50 mm weight 1.5 kg AX-WD: LPCM192 kHz/24 bit/128 fs DSD1 bit/ 64fs (DSD64 mode, 2.8224MHz) size W250 x D170 x H50 mm weight 1.6 kg
Compared to the MK1 LP/cable demagnetizer, this brush-up model has a dramatically increased demagnetization effect! I dared to leave the protective sheet attached to the surface of the acrylic cover. The exterior is also good without major scratches (Oikawa Tetsuji)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W430 x H105 x D400 mm 9.02 kg
The price has been drastically reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
Manufacturer maintenance, including pickup replacement, is being carried out in 2022. A belt drive CD player equipped with a 24-bit fully balanced module DAC. This player is popular for its thick sound quality unique to belt drives and a natural tone with no sense of emphasis. You can enjoy vocals and classical music in high quality. You can see a feeling of use on the exterior, scratches on the top plate, marks, dirt, dullness, scuffs, etc. on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.1.13 maintained (spindle bell pick up replacement Assy shaft dismantling, cleaning, grease up inspection disc, confirm regeneration operation)
Accessories: stabilizer, replacement remote control
Main specifications: belt drive type CD player CD-R compatible audio output: XLR balanced RCA unbalanced digital output: coaxial (RCA) optical (optical) AES/EBU (XLR) W435 x H98 x D296 mm 10 kg
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
Includes horseshoe ring A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. On the outside, oxidation can be seen on the horn part. Serial 104837 104761 (Tomonori Asae)
Maintenance information: 2023.12.24 sound output confirmed
Accessories: horseshoe ring
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms (measured 14/14 ohms), crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/book
The price has been reduced! 2024/6/8 sales price 89,800 yen ※All 5 tier types with 2 tiers of CLEAR GLASS and 3 tiers of black. Spike specification In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is subtly curved and cut so that vibration components gather at the four corners. Although the exterior has a light feeling of use, it is good without noticeable scratches (Tomoho Asaine)
Accessories: none
Main specifications: inch step W600 x H850 x D475 mm from above shelves, 100 mm, 180 mm, 220 mm, 220 mm (actual measurement)
This is a small bookshelf speaker from the 4th generation “MENUET.” Rosso color type. The glossy, small, yet high-quality sound that is traditional for MENUET is alive and well. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: saran net, instruction manual, original box
Main specifications: 2 way 2 speakers, low range, 115mm, cone type, treble range, 28 mm dome, playback frequency characteristics, 59 Hz to 25 kHz, input sensitivity, 86 dB, impedance, 4 ohms, W150 x H250 x D230 mm, 4.0 kg
The price has been reduced! 2024/6/8 sales price 89,800 yen You can enjoy the voluminous bass with highly efficient and heavy corn paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are small scratches etc. on the exterior. Serial 7413 10417 (Tomonori Asaine)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
Marantz pre-main amplifier. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good, although there are very few minor scratches on the top plate. Serial AUY15230905053 (Takahashi Nobuyuki)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, remote control, power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
The disposal price has been reduced! Member prices are not applicable. 2024/6/2 sales price 128,000 yen Woofer edge softening treatment! Comes with a genuine stand DK-1000ZX (list price 50,000 yen). Standard diamond tone model. The characteristics of the Boron scoker, which is strong and has a good sound, shine through. The tight low range with supple stretch is a sound unique to Diatone. You can enjoy excellent sound regardless of genre. The exterior has small scratches and dullness. ※Saran net is out of stock. Serial 14308/14315 (Fujisawa Yukishi)
Maintenance Information: 2024.6.2 woofer edge softened
Accessories: Genuine stand DK-1000ZX ※Saran net missing
Main specifications: [DS-1000ZX] 3 way 3 speaker sealed type 6.3 ohm output sound pressure level 90 dB W360 × H690 × D341 mm 29 kg [DK-1000ZX] W360 × H195 × D300 mm 6.2 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/31 sales price 128,000 yen Maintained! Hi-Fi is in stock for the first time! Macintosh transistor AM/FM tuner. The reception sensitivity is also good, and you can enjoy deep and warm sound even though it is a transistor. The exterior is scratched and dull. Serial JCR1658 (Jun Tamai)
Maintenance information: 2024.5.31 maintained (varicon cleaning, F cover adjustment, OSC capacity adjustment, windshield peeling correction, each SW and VOL cleaning)
Accessories: none
Main specifications: W405 x H135 x D360 mm weight 8.1 kg
The disposal price has been reduced! Member prices are not applicable. 2024/5/25 sales price 128,000 yen Maintained! The successor to the C-220, which was particular about the phono equalizer. Models from the heyday of analog are notable models that focus on records. The deep, authentic sound quality of PHONO with good sharpness is attractive. The exterior is dull and has small scratches. Serial C4X515 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (main volume, balance volume contact cleaning. Compensation center switch disassembly contact polishing contact grease application in the sealing door. Electrolytic capacitor replacement near the heating unit. (Check the operation of each input/output)
Accessories: power cord, copy of instruction manual
Main specifications: PHONO (MM/MC) line input 5 systems W466 x H153 x D385 mm 9.7 kg
Digital cable (BNC) 1.0 m (measured less than 1.2 m) An impeccably luxurious cable that combines delicacy and heaviness in each band. Not only is it clear and voluminous, but all sounds such as vocals, drums, and horns spread to the front, up, down, left, and right, creating a realistic sound. The exterior has deflections on the sheath (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
The 1,2m pair of XLR cables, NBS OMEGA 4, which has a low distribution volume, is in stock. It is a gem that has gained popularity among JAZZ and ROCK fans for its thick, energetic sound quality. It still makes me feel that CP is high. The exterior is good (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original bag
The price has been drastically reduced! 2024/6/7 sales price 118,000 yen Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has chipped veneer, stains, and scratches. Serial 15112, 15119 (Fujisawa Yukishi)
Maintenance Information: 2024.6.7 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
※The head pad is loose, so it's cheap. The earpads are in good condition. The Edition series flagship model is now in stock for the first time at Hi-Fi. It has a good balance from high to low frequencies, and it seems that it can be used regardless of genre. The ear pads are also soft to the touch and can be worn without stress. A slightly soapy scent remains on the body. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: special case, mini jack conversion plug
Main specifications: sealed dynamic headphone impedance 30 ohms playback frequency band 8 to 35,000 Hz sound pressure level 96 dB
Power cable 1.5m 7N copper conductor, custom-made plug and connector using stress-free treated beryllium copper, an advanced model of the company's power cable. The clear tone without stagnation and the sense of sound pressure are amazing. There is a fine scratch on the plug cover (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 148,000 yen Speaker that has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
The price has been reduced. 2024/6/2 sales price 118,000 yen Maintenance completed! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
The price has been drastically reduced. 2024/6/8 sales price 128,000 yen Sun Valley 6550 push pull The design imitates Macintosh amplifiers of yesteryear. The sound design is bright, energetic, and supple, and has excellent sharpness that is more responsive than a normal transistor amplifier. There is dullness, dirt, small scratches, and dullness on the metal part of the power cord (Murakoshi Yoichi)
Maintenance information: 2024.6.7 sound output confirmed
Accessories: power cord
Main specifications: 6550 push-pull rated output 40W+40W using vacuum tube 6550, EL84 x 4 (SOVTEK), 12AX7EH x 2 (electro-harmonix) 4Ω/8Ω compatible W430 x D270 x H200 mm 18 kg
The price has been drastically reduced. 2024/6/6 sales price 148,000 yen Manufacturer maintained! Accuphase CD player. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. There are many line marks, other small scratches, and a feeling of use on the top surface. Serial D0Y305 (Murakoshi Yoichi)
Maintenance information: 2024.6.4 manufacturer maintenance (tray opening/closing belt set and buffer spacer, operation switch, phase and capacitor replacement. Disassembly and cleaning of the loading mechanism. Operation, characteristic tests, aging tests, readjustment of parts, interior and exterior cleaning, insulation, and safety tests)
Accessories: remote control, instruction manual (copy)
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/5 sales price 148,000 yen Maintenance completed! Scarce! Mcintosh tubular 2ch mono FM/AM tuner. The band was changed from the US version to domestic use, and the deteriorated vacuum tubes, capacitors, etc. were replaced, and they were restored brilliantly. I take my hat off to the persuasive power of the tuning, and the super rich, sexy sound quality typical of McKinn, even just listening to the narration. In addition to paint peeling on the exterior and metal frame, you can also see a feeling of use over time, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintained (for US use → band change/AC100 → 117V step-up transformer added AC code exchange/block capacitor 50 μF x 4 replacement/3 electrolytic capacitors 20 μF, etc. · 5 ceramic capacitors 15 pF and others added or replaced · 2 vacuum tubes 6Be6 and 6AB4 replacements (both offset with supply 6V4) · AM antenna line 5m added · vacuum tube 6U8 and 6AB4 (2 6AU6 exchanges, IF/RF readjustment ※ operation checked with other AC117V)
Accessories: step-up transformer
Main specifications: Vacuum tubes used EF94/6AUC, 6BN6, 6BJ6 x 2, 6BA6, 6B4, 6B07A, 12AU7A, 6BQ7A, 6AL5, 6BU8, 12AU7R, etc., all 18 others W374 x H120 x D304 mm 7.7 kg
The disposal price has been reduced. Member prices are not applicable. 2024/6/3 sales price 148,000 yen Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. The exterior has rust, paint peeling, etc. Serial 32769 32799 (Tomonori Asaine)
Maintenance information: 2024.6.3 maintained (diaphragm repair and installation adjustment pad dampener replacement, 18 mounting screws, replacement, distribution terminal, contact part cleaning, terminal cleaning, 8 insulating bushings, replacement, diaphragm cleaning)
Accessories: none
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg